Brides hydrauliques - Fr.stauff.com

BRIDES HYDRAULIQUES/FLANGES
REFERENCES
PN
bar¹
Brides livrées avec joint torique et vis métriques
DN
Ø extérieur tube
MM GAZ SCHD
Ø L1 Ø L2 Ø A K L
VISSERIE (bolt)
Métrique
BL-3000-SWI-1/2"-20.5
BL-3000-SWI-1/2"-21.7 13 20 21.15 21.34
20.5
21.7 30 13 13 80 M 8X25
BL-3000-SWI-3/4"-25.5
BL-3000-SWI-3/4"-27.3
BL-3000-SWI-1"-30.5 315
19 25
30
26.75 26.68
25.5
27.3
30.5
35 19 13 88 M 10X30
BL-3000-SWI-1"-32.5
BL-3000-SWI-1"-34
25
32
33.50 33.40
32.5
34
44 25 16 100 M 10X30 *
BL-3000-SWI-1"-35.5 35 35.5
BL-3000-SWI-1"1/4-38.5 *
38 38.5
BL-3000-SWI-1"1/4-40.5 * 32 40 40.5 55 32 18 120 M 12X30 *
BL-3000-SWI-1"1/4-43 * 42 42.25 42.16 43
BL-3000-SWI-1"1/2-49 *
BL-3000-SWI-1"1/2-50.4 *
200
38 50
48.25 48.26 49
50.4 63 38 20 130 M 14X35 *
BL-3000-SWI-2"-61 *
BL-3000-SWI-2"-65.8 * 51
60
65
60.30 60.32
65.8
61
65.8 79 47 22 147 M 14X35 *
BL-3000-SWI-2"1/2-74 *
73.02 74
BL-3000-SWI-2"1/2-77 *
BL-3000-SWI-2"1/2-81 *
150 64
80
76.10 77
81
98 58 24 170 M 14X40 *
BL-3000-SWI-3"-90.5 100 76 90 88.90 90.5 116 70 28 190 M 16X50
Flanges with 0'Ring and metric bolts
REFERENCES BAS NUES
BAS WITHOUT ANY BOLT
BRIDES DE LIAISON SOCKET WELDING INTEGRAL - SAE 3000 / ISO 6162-1
UNION ASSEMBLY FLANGES SOCKET WELD tube end - SAE 3000 / ISO 6162-1
BRIDES A SOUDER SOCKET WELDING INTEGRAL - SAE 3000 – ISO 6162-1
CONTER FLANGES SOCKET WELD TUBE END - SAE 3000 – ISO 6162-1
GG O Q FF Ø L1 Ø A K U TARAUDAGE
THREAD
17.5 54 38.1 45
20.5
13 13 20 M 8
22.3 65 47.6 55
25.5
30.5
19 13 20 M 10
BAS-3000-SWI-1/2"-20.5
BAS-3000-SWI-1/2"-21.7
BAS-3000-SWI-3/4"-25.5
21.7
BAS-3000-SWI-3/4"-27.3
BAS-3000-SWI-1"-30.5
27.3
BAS-3000-SWI-1"-32.5
BAS-3000-SWI-1"-34
26.2 70 52.4 60
32.5
34
25 16 25 M 10
BAS-3000-SWI-1"-35.5 35.5
BAS-3000-SWI-1"1/4-38.5 * 38.5 M 12
BAS-3000-SWI-1"1/4-40.5 * 30.2 80 58.7 73 40.5 32 18 25 ou
BAS-3000-SWI-1"1/4-43 * 43 M 10 (ISO)
BAS-3000-SWI-1"1/2-49 *
BAS-3000-SWI-1"1/2-50.4 * 35.7 94 69.8 80
49
50.4 38 20 30
M 14
ou M 12 (ISO)
BAS-3000-SWI-2"-61 *
BAS-3000-SWI-2"-65.8 * 42.9 100 77.8 97
61
65.8 47 24 40
M 14
ou M 12 (ISO)
BAS-3000-SWI-2"1/2-74 * 74 M 14
BAS-3000-SWI-2"1/2-77 * 50.8 114 88.9 110 77 58 24 40 ou
BAS-3000-SWI-2"1/2-81 * 81 M 12 (ISO)
BAS-3000-SWI-3"-90.5 61.9 135 106.4 131 90.5 70 28 40 M 16
(1)Pression maxi. recommandée
* Sur demande livrable avec visserie suivant ISO 6162 : SAE 3000 1"1/4=M10, de 1"1/2 à 2"1/2 = M12
SAE 6000 1"1/4 = M12. Le spécifier à la commande.
* On request can be delivered with ISO 6162 bolt : SAE 3000 1"1/4 = M10, 1"1/2 to 2"1/2 = M12 / SAE 6000 1"1/4 = M12. Specify into the order
36
Trous taraudés selon visserie
prévue au tableau ci-dessous
Threaded according to bolt as specified by the following
table
19011 – Rev.2 12/10