AMTRON R X-50

Recommendations

Info

Mounting and operating instructions AMTRON R○ X-50 Explanations S-Edit P-Edit E 12345678 kWh INFO E 12345.678 kWh E 12.345678 kWh Prog Prog Edit Memory Press Select key Press Enter key Press Service key Press Programming key (under seal) Unit in User Mode Unit in Service Mode Unit in Program Mode, only possible if the seal is destroyed Example for a display Display under certain conditions Unit in Edit Mode Display of logger data and billing readings Press Select and Enter keys simultaneously: 3 more decimal places will be shown Edit in Service Mode: - Press Service key - Press Enter key - Entry according to type of data Edit in Programming Mode: - Press Service key - Press Enter key - Entry according to type of data VD 3-248 e 03.2006 10 Aquametro AG
AMTRON R○ X-50 Mounting and operating instructions Main loop The main loop shows the most important readings and provides access to subloops. High accurate readings can also be displayed when both keys are pressed simultaneously. The meter readings of the calculator can be adjusted to external counters in Service- or Program-Mode. Changes in Program-Mode can only be changed if the instrument is not a verified unit. E 12345678 kWh V 12345678 m3 H2 12345 .678 m3 H3 12345 .678 m3 ImP 100 L Sid cold INFO InStAnt tIME Stich LOGGEr InPutS OutPutS UnitS M-bUS CONFIG SYStEM LCD Test / P-Edit / P-Edit / S-Edit / S-Edit Energy Volume Auxiliary meters 2 Auxiliary meters 3 Pulse value Installation side Error messages Display test Instantaneous values Time parameters Billing date Logger data Input signal parameters Output signal parameters Units M-Bus parameters Configuration parameters Manufacturing parameters Aquametro AG 11 VD 3-248 e 03.2006
Page 1 and 2: Mounting and operating instructions
Page 3 and 4: AMTRON R○ X-50 Mounting and opera
Page 9: AMTRON R○ X-50 Mounting and opera

AMTRON R X-50

Create successful ePaper yourself

Delete template?

Save as template?