Reference Manual MT-SICS for Halogen Moisture ... - Mettler Toledo

PWR Power On/Off
Command PWR/x1 Switch Halogen Moisture Analyzer On or Off
x1: 0 Set Halogen Moisture Analyzer to
standby mode
1 Switch Halogen Moisture Analyzer on
Response PWR/A A
Halogen Moisture Analyzer has been switched off
successfully
PWR/A A
Halogen Moisture Analyzer with the serial number
I4/A/"text" according to text has been switched on succesfully
(see also I4 command)
PWR/L Command understood, parameter wrong, (number,
value range, …)
Comments
• In the standby mode, the interface remains active; but all commands except PWR, HA07
and HA20 are answered with EL.
• On switching on, the Halogen Moisture Analyzer also sends the serial number (see also
I4 command).
• On switching off, all current commands are terminated (see also @ command).
P100 Print out text on the strip printer
Command P100/"x1" Print out "text" on the internal printer
Response P100/A A Command executed
P100/I Command can not be executed at present as there is
no printer or the printer buffer is full
P100/L Command understood, parameter wrong, (value
range, …)
Example
Command P100/"HALLO" Print out HALLO on the strip printer
Response P100/A A
Printout has been started
26 METTLER TOLEDO MT-SICS HR83/HG63 Reference Manual