Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ...

OL-18906-03
Configuring Radio Settings
CHAPTER
9
This module describes how to configure radio settings for the wireless device in the following sections:
Enabling the Radio Interface, page 9-2
Configuring the Role in the Radio Network, page 9-2
Configuring Radio Data Rates, page 9-5
Configuring MCS Rates, page 9-9
Configuring Radio Transmit Power, page 9-10
Configuring Radio Channel Settings, page 9-12
Enabling and Disabling World Mode, page 9-14
Disabling and Enabling Short Radio Preambles, page 9-15
Configuring Transmit and Receive Antennas, page 9-16
Disabling and Enabling Aironet Extensions, page 9-17
Configuring the Ethernet Encapsulation Transformation Method, page 9-18
Enabling and Disabling Public Secure Packet Forwarding, page 9-19
Configuring the Beacon Period and the DTIM, page 9-21
Configure RTS Threshold and Retries, page 9-22
Configuring the Maximum Data Retries, page 9-23
Configuring the Fragmentation Threshold, page 9-23
Enabling Short Slot Time for 802.11g Radios, page 9-24
Performing a Carrier Busy Test, page 9-24
Configuring VoIP Packet Handling, page 9-25
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Software Configuration Guide
9-1