Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ...

3-34
Configuring WAN Interfaces
Data Account Provisioning
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Software Configuration Guide
Chapter 3 Basic Router Configuration
Note To provision your modem, you must have an active wireless account with a service provider. A SIM card
must be installed in a GSM 3G wireless card.
To provision your data account, follow these procedures:
Verifying Signal Strength and Service Availability
SUMMARY STEPS
DETAILED STEPS
Verifying Signal Strength and Service Availability, page 3-34
Configuring a GSM Modem Data Profile, page 3-35
CDMA Modem Activation and Provisioning, page 3-35
To verify the signal strength and service availability on your modem, use the following commands in
privileged EXEC mode.
1. show cellular 0 network
2. show cellular 0 hardware
3. show cellular 0 connection
4. show cellular 0 radio
5. show cellular 0 profile
6. show cellular 0 security
7. show cellular 0 all
Command or Action Purpose
Step 1 show cellular 0 network
Displays information about the carrier network, cell
site, and available service.
Example:
Router# show cellular 0 network
Step 2 show cellular 0 hardware
Example:
Router# show cellular 0 hardware
Step 3 show cellular 0 connection
Example:
Router# show cellular 0 connection
Displays the cellular modem hardware information.
Displays the current active connection state and data
statistics.
OL-18906-02