Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ...

Contents
iv
Network Configuration Examples 2-3
Root Access Point 2-3
Central Unit in an All-Wireless Network 2-4
CHAPTER 3 Basic Router Configuration 3-1
Interface Ports 3-2
Default Configuration 3-2
Information Needed for Configuration 3-4
Configuring Command-Line Access 3-5
Configuring Global Parameters 3-7
Configuring WAN Interfaces 3-8
Configuring a Fast Ethernet WAN Interface 3-8
Configuring the Media Type 3-9
Configuring a Gigabit Ethernet WAN Interface 3-10
Configuring a V.92 Modem Interface 3-11
Configuring a VDSL2 WAN Interface 3-12
Configuring ADSL or VDSL on Cisco Multi Mode 886VA and 887VA ISRs 3-13
Configuring ADSL Mode 3-15
Configuring VDSL Mode 3-22
Configuring a G.SHDSL WAN Interface in ATM mode 3-28
Configuring a G.SHDSL WAN Interface in EFM mode 3-31
Configuring the Cellular Wireless WAN Interface 3-32
Configuring the Fast Ethernet LAN Interfaces 3-43
Configuring the Wireless LAN Interface 3-43
Configuring a Loopback Interface 3-43
Configuring Static Routes 3-45
Example 3-45
Verifying Configuration 3-45
Configuring Dynamic Routes 3-46
Configuring Routing Information Protocol 3-46
CHAPTER 4 Configuring Security Features 4-1
Configuring Enhanced Interior Gateway Routing Protocol 3-48
Authentication, Authorization, and Accounting 4-1
Configuring AutoSecure 4-2
Configuring Access Lists 4-2
Access Groups 4-3
Configuring Cisco IOS Firewall 4-4
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Software Configuration Guide
OL-18906-02