Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ...

OL-18906-02
Configuring Cisco IOS IPS 4-4
URL Filtering 4-5
Configuring VPN 4-5
Configure a VPN over an IPSec Tunnel 4-8
Create a Cisco Easy VPN Remote Configuration 4-15
Configure a Site-to-Site GRE Tunnel 4-18
Configuring the Router
CHAPTER 5 Configuring Backup Data Lines and Remote Management 5-1
Configuring Backup Interfaces 5-2
Configuring Cellular Dial-on-Demand Routing Backup 5-3
Configuring DDR Backup Using Dialer Watch 5-3
Configuring DDR Backup Using Floating Static Route 5-5
Cellular Wireless Modem as Backup with NAT and IPsec Configuration 5-6
Configuring Dial Backup and Remote Management Through the Console or Auxiliary Port 5-9
Example 5-12
Configuring Data Line Backup and Remote Management Through the ISDN S/T Port 5-15
Configuring ISDN Settings 5-16
Configuring Aggregator and ISDN Peer Router 5-18
Configuring Gigabit Ethernet Failover Media 5-20
CHAPTER 6 Configuring Ethernet Switches 6-1
Switch Port Numbering and Naming 6-1
Restrictions for the FE Switch 6-1
Information About Ethernet Switches 6-2
VLANs and VLAN Trunk Protocol 6-2
Inline Power 6-2
Layer 2 Ethernet Switching 6-2
802.1x Authentication 6-3
Spanning Tree Protocol 6-3
Cisco Discovery Protocol 6-3
Switched Port Analyzer 6-3
IGMP Snooping 6-3
Storm Control 6-4
Fallback Bridging 6-4
Overview of SNMP MIBs 6-4
BRIDGE-MIB for Layer 2 Ethernet Switching 6-4
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Software Configuration Guide
Contents
v