THE CLOCK OF THE LONG NOw - Long Now Foundation
THE CLOCK OF THE LONG NOw - Long Now Foundation
THE CLOCK OF THE LONG NOw - Long Now Foundation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
note: I assume that a multi axis wire EDM is the<br />
tool for cutting this. We can supply the DXF or<br />
IGES file for this. The inital cup shape could be<br />
spun or turned but should be sanded smooth to<br />
remove all machining marks. (to 800 grit) It could<br />
even be welded from two pieces if necessary and<br />
the welding ground and sanded out. This part can<br />
be made from aluminum if necessary but we<br />
would prefer stainless. Grade is only important in<br />
considering finish. We want to electropolish it to<br />
a high luster.<br />
sc: 1:3<br />
nm: Rete.VLM<br />
dt: 10/22/98 p#: 5501.2<br />
The <strong>Long</strong> <strong>Now</strong> <strong>Foundation</strong><br />
tol. +/- .020 (shape) +/-.005 (pin holes)<br />
Matl: Stainless Steel<br />
Qty: 2 required