THE CLOCK OF THE LONG NOw - Long Now Foundation

More documents

Recommendations

Info

note:.Pie shaped opening are for aesthetic improvement and weight reduction. Tolerances here are not as critical. They have 1.5" wide spokes with 1" distance from both internal and outter diameters. Their internal corners are radiused to .25". Matl: 70-75 Al Qty: 2 required nm: MoonSubSpacer.VLM sc: 1:3.5 dt: 11/4/98 The Long Now Foundation tol. +/-.005 (locator pins) p#: 5513.2
note: Edge and top finish are most crucial here, these are the most visible parts on the clock, every measure should be taken to be sure they are not scratched or bent. Parts should be flat to within .010". The rabbet machined into the inner/under side of the ring is to .100" depth and needs to press fit onto the link tube p#5503. flat can be left on window opening. sc: 1:3 nm: Moon.VLM dt: 04/06/00 p#: 5502.3 tol. +/- .005 The Long Now Foundation Matl: Stainless Steel, blanchard ground Qty: 1 required
Page 1 and 2:
"It feels like something big is abo
Page 3 and 4:
About this book This book is a reco
Page 5 and 6:
Don’t tempt thieves Maintainabili
Page 7 and 8:
Options considered for powering the
Page 9 and 10:
Options considered for the part of
Page 11 and 12:
Some options for what to display: D
Page 13:
Drive Towers - 7- 5- 6- 1- Drive Tr
Page 16:
CALENDAR YEAR (bottom to top of eac
Page 19 and 20:
eot.nb 2 This is how far the modif
Page 21 and 22:
eot.nb 4 (blank page 5 deleted) new
Page 23 and 24:
eot.nb 7 This is the julian day nu
Page 25 and 26:
eot.nb 9 ParametricPlot3D Evaluate
Page 27 and 28: eot.nb 11 ParametricPlot3D Evaluate
Page 29 and 30: eot.nb 13 the one below looks the
Page 31 and 32: eot.nb 15 rotrate N 171 173 99 365
Page 38: movement layout David Munro
Page 45 and 46: SKF .9843" bore, 1.8504" OD, .5906"
Page 47 and 48: nm: 8"screw.vlm sc: 1:5 dt: 11/3/99
Page 49 and 50: note: the helix band is a LEFT HAND
Page 51 and 52: nm: DriveEndCaps8in.vlm sc: 1:5 dt:
Page 53 and 54: nm: DriveMountRing8in.vlm sc: 1:5 d
Page 55 and 56: 47 48 49 50 51 43 44 45 46 52 42 06
Page 57 and 58: note:. sc: 1:3.5 dt: 10/22/98 p#: 5
Page 59 and 60: p#: 5519.1 p#: 5520.1 sc: 1:3.5 nm:
Page 61 and 62: p#: 5519.1 p#: 5520.1 sc: 1:3.5 nm:
Page 63 and 64: note: Every other hole is tapped or
Page 65 and 66: star.nb 1 Stars This file uses the
Page 67 and 68: star.nb 3 showstars eclstars -7.5 -
Page 69 and 70: star.nb 5 dotgraphics Show dotimag
Page 73 and 74: note: I assume that a multi axis wi
Page 76 and 77: note: The stripe on the right is a
Page 82 and 83: nm: InnerSpacer.VLM sc: 1:3.5 dt: 1
Page 84 and 85: note: Pie shaped opening are for ae
Page 86 and 87: notes: This is a display part. Aest
Page 90 and 91: sc: 1:3 tol. +/- 0.005" Qty: 1 req.
Page 92 and 93: Torsional Pend.Point&tube flange sc
Page 94 and 95: Note: the depth of this c-bore has
Page 96 and 97: Torsional PendulumInner arm sc: 1:3
Page 98 and 99: Torsionpedulum4.nb 2 TorsionSpringC
Page 100 and 101: Torsionpedulum4.nb 4 safetorque To
Page 102 and 103: Torsionpedulum4.nb 6 t . sln .C 1
Page 104: Torsionpedulum4.nb 8 LossPerDay 3
Page 150:
Next 134049239 134064560 134217770
Page 225 and 226:
horizoncam.nb 2 DegreesMotion .58 1
Page 227 and 228:
horizoncam-approx.nb 2 Plot ArcSin
show all

THE CLOCK OF THE LONG NOw - Long Now Foundation

Create successful ePaper yourself

Delete template?

Save as template?