THE CLOCK OF THE LONG NOw - Long Now Foundation
THE CLOCK OF THE LONG NOw - Long Now Foundation
THE CLOCK OF THE LONG NOw - Long Now Foundation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
note: These are highly visible parts on the clock,<br />
every measure should be taken to be sure they are<br />
not scratched or bent. Parts should be flat to<br />
within .010". The rabbet machined into the inner<br />
/upper side of the ring is to .200" depth and needs<br />
to press fit onto the link tube p#5503. The outter<br />
surface is machined down .150" leaving .100".<br />
nm: MooUprSpacern.VLM<br />
sc: 1:3 dt: 4/6/00 p#: 5510.3<br />
The <strong>Long</strong> <strong>Now</strong> <strong>Foundation</strong><br />
tol. +/- .005<br />
Matl: 303 Stainless Steel, Blanchard Ground<br />
Qty: 1 required