THE CLOCK OF THE LONG NOw - Long Now Foundation
THE CLOCK OF THE LONG NOw - Long Now Foundation
THE CLOCK OF THE LONG NOw - Long Now Foundation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
note: The stripe on the right is a machined goove<br />
.063" deep. Edge and top finish are most crucial<br />
here, these are the most visible parts on the clock,<br />
every measure should be taken to be sure they are<br />
not scratched or bent. Parts should be flat to<br />
within .010". The locater pins underneath should<br />
be same material as plate. They can be located by<br />
spot facing blind holes from the bottom, pressed<br />
in and then loctited in place. Most important is<br />
that there is no discoloration or show through to<br />
front. They take almost no lateral load and are<br />
primarily for location.<br />
nm: OutterSpacer.VLM<br />
sc: 1:4 dt: 1/27/00 p#: 5508.5<br />
The <strong>Long</strong> <strong>Now</strong> <strong>Foundation</strong><br />
tol. +/-.005 (locator pins)<br />
Matl: Stainless Steel<br />
Qty: 2 required
Change language