Quick Start Guide - M-Audio
Quick Start Guide - M-Audio
Quick Start Guide - M-Audio
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12<br />
13 14 15<br />
5<br />
Evolution UC-33e Getting <strong>Start</strong>ed<br />
1. Nine 70mm faders labelled F1 - F9, all of which are fully MIDI assignable.<br />
2. Twenty-four rotary controllers numbered C10 - C33, all of which are fully<br />
MIDI assignable.<br />
3. Four assignable MIDI buttons numbered C34 - C37.<br />
4. Ten assignable MIDI buttons numbered C38 - C47, doubles up as a<br />
numeric keypad (0-9) in Edit mode.<br />
5. +/- Buttons. Dual press function sends out Snap Shot command.<br />
6. Dual press function button commands for Drawbar Mode, Global MIDI<br />
Channel and MIDI Out From USB.<br />
7. Single press function button commands for Preset Recall, Individual<br />
MIDI Channel Assign, Controller Assign and Controller Select.<br />
8. Dual press function button commands for Memory Dump, Device ID and<br />
Controller Mute.<br />
9. Single press function button commands for Preset Store, DATA MSB,<br />
DATA LSB and Program (for sending out program change messages).<br />
10. Four preset buttons recall presets 01,02,03 and 04 respectively.<br />
11. Backlit LCD display.<br />
12. USB MIDI In/Out connects to the USB port of your computer via the included<br />
USB cable.<br />
13. MIDI In plug used to connect other MIDI hardware to the UC-33 via a<br />
standard MIDI 5-Pin DIN type plug (not included).<br />
14. MIDI Out plug used to connect the UC-33 to other MIDI hardware via a<br />
standard MIDI 5-Pin DIN type plug (not included).<br />
15. Power on/off switch.<br />
16. DC In plug for connection of 9v DC power supply (not included).<br />
16