Perfect Pass Owner's Guide

-
Fr Section 5 Other Features
I Press Menu & Up keys together to access the following:
Fr
Screen Contrast - By pressing up or down keys you can change the contrast level.
r
Range is 0 - 5. Lower values : better visibility in extreme sun. 3 is normal.
H- Name List - You can get to the name list through this feature, or by highlighting the
mode or name on main screen and press up.
Fl System Info - This screen will display software version #,battery voltage, engine
selection and water temperature. (Some information not on all boats)
Ff
I
Ff
I
Fr
Fr
CS & CR (Control Settings)
CS is a control parameter for the Wakeboard speed based modes. This adjustable
parameter allows you to tune the engagement of the s)'stem so it is ideal for your boat.
Fleaviiy weighted boats may need a higher CS to engage and conuoi properll'. Factory
value on WakeboardPro is about 750.
ExamPle:
1. You are set fol 22mph,but s1'stern or'3ishi..:s =i .:--=:: 15::ph betbre setthng
back. CS shouid be lorr'ered. tTn' adl-::;l- :: I - .: -1 :-::- r.
2. You are set for 23 mph. b:r: ::=: -''':-l
-'-, -.=-::
l-: ::-:: :-;3:lsase'
CS must be raised to allo"r,- lb: : --:=: ::-:::-::-::-: : l'-1.
CR ls ror RP\I node ani srlle s- '':* F.;::1 >;:::: ,:c':t i S00.
-
E:tam-e:
I i,--c-:: sr,-s:::l -r s-al.':: -i'-:--::: 3:i-: t: -: - ::l::- raise CR r-alue.
Fr : :i1::::: :-,-::.1:::s s;-': -: -,::t--:::;::-:::. l:'"';:l:he senine.
rr I
'
F!
Thronle Orerride O\ OtT - S::= :,--i -::::-= :' -=-:: ,-.r.:--rr.. Tiris means
li1-ou adla::; --:: --::::--: ::-r:: --.=
-::i-:-:;-*::;l-t :.s ::::3-l- :: :::: s:::l -."1-]i ::ol-e ahead
to *-hele :Le : =::-:
-s :':.::::;: - :: ?=:::i:s; "- ::::-: :::l:-. -.
-: ::::*ot:ull the
thronlebecs:: r-:-:::----:J:'-:---:- l::::-- :::--::::- :a :.:::-' :r-:-:1 ;nr-ers for
"Double L p" :-;:c :-,-:i-=. FOf mffit Usert* w:e Felcr0r]rlllrrt'{rmd ':,r erride tre left in OFT
posrnon.
r
XU - If throttle override is activated on )ourboat. t::-. ,
---i -: -" : - .: .:-.''--': :h3
' - throttle while PerfectPass is engaged and override the srslem. li-.:: ",.-:- ::::e ;.s 3 - 6,
& normal is 4.The higher the value, the more aggressive override is once .;1.- a:eoJ. If you
use override, you must pull the throttle back to its former position for it to re-take control.
Ft
Device Test - Troubleshooting information electronic throttle systems. See Page 10 for
details
FI
More Throttle - If 1'ou see the # sign flashing in the upper right part of screen, this
I means the system is running out of manual throttle. Advance the handle forward a little
-=t until the # sign disappears,
II
II