PERFORMANCE PRODUCT GUIDE BOOK 2007 - Ansmann

GET A CHARGE AND
STAY IN BALANCE
ORI62201 LiPo Charging System
Team Orion Avionics Advantage Li-Po Charging System is the perfect companion
for those that use Li-Po exclusively and want a simple one touch means of
charging. Whether for those quick lunchtime fl ights or day in the park the
Advantage Li-Po charger will keep your Li-Po’s charged and your power
smooth pack after pack.
Features:
• Capable of charging 1-4 Li-Po cells
• Automatic charge current (0.1A-3.0A)
• Automatic cell detection 1 to 3 cells
• Manual cell selection for 4 cells
• Constant current/constant voltage charge method
• Dual Led and bip easy charge indicator
• Compact & portable size
• Super durable plastic case
Specs:
Input Voltage: 11.0-15.0V DC
Battery type & cells: Li-Po cells 1-4 (3.6 or 3.7V)
Charge current: 0.1A ~ 3A
Size L88mm x W55mm x H23mm
Weight 112 grams
ORI62200 Advanced Flight Charger
Team Orion Avionics Advanced Flight Charger is the must have option for those
serious about electric fl ight. With a ton of features packed into it’s compact size,
the Advantage Advanced Flght Charger provides all the features of a large size
charger, without the size, weight and expense.
Features:
• Capable of charging and Discharging:
- NiCD/Ni-MH 1-14 cells
- Li-Io or Li-Po 1-5 cells
- lead acid (Pb) batteries 1-6 [2V per cell]
• Adjustable charge current (0.1A-5.0A)
• Adjustable discharge current (0.1A-1.0A)
• “Zero Delta V” peak detection for NiCd and Ni-MH batteries
• “Constant current/discharge voltage” charge method for lithium-Ion/Li-Po
and Pb batteries.
• Compact & portable size
• Cycling (Charge to Discharge / Discharge to Charge)
• 2 line, 16 character blue backlit LCD Screen
• Button control - “Surface panel type”
• Warning sytems prevents improper voltage
• Super durable aluminum case
Specs:
Size - L-111mm x D-80mm x H-32mm
Display Type: 2 line, 16 character LCD backlit
ORI62204 Stability Balancing System
Team Orion Avionics SBS (Stability Balancing System) has been developed for yesterday as well as today’s high output Li-Po cells. Even though today’s cells such as Avionics
own SLPB cells are extremely durable they can over time begin to fatigue and under abusive conditions, can become out of balance resulting in battery failures. To prevent this
Team Orion Avionics has come through with the SBS to bring your Li-Po cells back to their original glory.
The SBS does this by bringing individual Li-Po cells to the same voltage level when they are wired together in series to form a battery pack. This is necessary since individual
cells tend to develop different states of charge, or voltage, when discharged, although the tendency may be more or less pronounced according to the way in which the pack is
discharged. Recommended practice is to bring the cells to the same voltage state in order to avoid overcharging or deep-discharging, which results in permanent cell damage.
The SBS carries out this task completely automatically when the pack is being charged. During the charge process the unit monitors the voltage of the series-connected cells
and brings them all to the same level. The Equalizer is simply connected between the Li-Poly charger and the battery pack. The parameters for charge termination voltage
and charge current are set on the battery charger itself. The SBS corrects the cell voltage from the commencement of charging, in contrast to other types of voltage controller.
Features:
• Capable of Balancing 2-5 Li-Po cells pack
• Charge current up to 6 Amps
• Easy to monitor 5 LED display
• Over charge and discharge protection
• Stability by balancing accuracy
• Increase battery performance and life
• Compact & portable size
Specs:
Input Voltage: Max 55.0 V DC
Output Voltage : 6-30 V
Li-Po cells 1-5 (3.6 or 3.7V)
Charge current: Max 6 Amps
Voltage resolution : +/- 5 mV
Imput : Gold connector
Balance connector : JST EH Type
Size L85mm x W45mm x H18mm
Weight 46 grams
NOTE: The SBS is a termination circuit which is triggered when battery voltage rises to an excessive level. If one cell of a pack containing 2 ... 5 cells reaches a voltage of 4.3 Volts, the charge process is immediately interrupted. The series-wired cells must be connected to the SBS via a sensor
cable, in order to enable the unit to measure the voltage of individual cells. Ready-made Avionics SLPB Li-Poly batteries are fi tted with the appropriate connector as standard. If you already own Li-Poly batteries without the connector, they will need to be upgraded by fi tting the appropriate
connectors. The SBS can also be used to discharge the pack if necessary, and to balance the level of the fi nal discharge voltage. The unit can either be used independently (very slow discharge rate) or by connecting it to a battery charger set to discharge mode.