16/ 8/ 4 CH MPEG4 Multiplex DVR USER MANUAL - Surveillance ...

More documents

Recommendations

Info

INSTALLATION 4.2.2 Audio (*Refer to the specification) Audio Input - AUDIO IN : Connect the RCA Line Jack of the relevant equipment (for example, a camera with a built-in microphone) to the AUDIO IN port. Audio Output - AUDIO OUT : Connect the RCA Line output to a monitor with a built-in speaker. NOTE This <strong>DVR</strong> can be connected only with a line audio and not support a microphone for audio input and output. To record audio should be enable in the AUDIO setup at the MENU setup. As the audio is linked to a camera, it is required that linked camera viewed, either in multi-screen view during playback to hear the audio. 11
12 INSTALLATION 4.2.3 Monitor - Connect the female BNC for monitor output. - Connect the male Y/C cable socket for S-VIDEO monitor output. 4.2.4 Power CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AC110~240V 50/ 60Hz - Auto-detect the correct voltage of power (110~240 VAC) - Connect the power cord.
Page 1: 16/ 8/ 4 CH MPEG4 Multiplex DVR USE
Page 4 and 5: CONTENTS CONTENTS CHAPTER 1 FEATURE
Page 6: FEATURES Audio 4 channels audio rec
Page 10 and 11: INSTALLATION Chapter 4 Installation
Page 15 and 16: OPERATION Chapter 5 Operation 5.1 F
Page 17 and 18: 16 OPERATION REC/PLAY CHECK…..…
Page 19 and 20: OPERATION Use the +10 Button when y
Page 39: - MENU SETUP 6.1. 1 QUICK SETUP Sel
Page 75 and 76:
Ch EXTERNAL TERMINAL INFORMATION ap
Page 77 and 78:
EXTERNAL TERMINAL INFORMATION 7.5 V
Page 79:
SPECIFICATIONS Chapter 8 Specificat
Page 82:
HDD DD INSTALLATION PROCESS 8 .1 IN
show all

16/ 8/ 4 CH MPEG4 Multiplex DVR USER MANUAL - Surveillance ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?