AUTOMATIC TRANSAXLE UNIT

http://www.ondemand5.com/mric/common/asp/printart.aspx
Fig. 423: Measuring Dimension C
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Using vernier calipers and a straightedge, measure the dimension shown in Fig. 423.
f. Calculate the end play value using the following formula. Select a thrust bearing which satisfies the end play value
and install the selected bearing.
End play:
0.244 to 0.901 mm (0.0096 to 0.0355 in.)
NOTE: Make sure that the no-colored race side is facing the direct clutch assembly.
HINT:
End play = Dimension D - Dimension C
AUTOMATIC TRANSMISSION - U151E -2006 Toyota Avalon Limited
7/27/2012
Page 134 of 203