Soil and waste product guide - CMS

Soil & Waste Systems Product Guide 

CI/SfB 

(52.6) In6 

August 2005 SW206 

FOR RESIDENTIAL, 

COMMERCIAL AND 

INDUSTRIAL APPLICATIONS 

Uniclass EPIC 

JR11 L7313 B52 X71 

Intelligent Solutions for Above Ground Projects

2 

OSMA 

OSMA, from Wavin Plastics Limited, is 

the leading name in plastic systems for 

building, construction and utilities. The 

OSMA product range is unrivalled in 

scope and quality, covering: 

Above Ground systems 

Plumbing and Heating systems 

Below Ground Drainage systems 

Water Management systems 

Ducting systems 

Water and Gas Distribution systems 

Quality assured products 

OSMA systems are the benchmark for 

excellence and product innovation: 

precision-manufactured in the UK using 

the most advanced injection moulding 

and extrusion machines. All products 

comply with or exceed relevant British 

and European standards to ensure 

reliability and long-lasting service. 

Intelligent connections 

OSMA systems offer integrated solutions. 

This enables specifiers and installers to 

assemble complete drainage, plumbing 

and heating, and pressure pipe systems 

from a single source, with complete 

confidence in compatibility and 

performance. 

All systems are backed by comprehensive 

technical support and a nationwide 

distribution network to ensure availability 

when and where required. 

CUSTOMER SERVICES 

01249 766611 

From Wavin 

Wavin is a leading European 

manufacturer of industrial plastic 

products, and one of the largest 

producers of plastic pipe and fittings 

in the world. 

Wavin is credited with inventing and 

pioneering the use of plastic pipe 

for water distribution in the mid 1950s. 

Constant research and development 

has enabled Wavin to maintain it's 

position at the forefront of plastics 

technology. 

Environmental 

responsibility 

Wavin Plastics Limited has BS EN ISO 

9001:2000 Registered Firm status and 

was the first plastic pipe manufacturer 

to be accredited to BS EN ISO 14001 

Environmental Management Systems. 

Wavin Plastics Limited is committed to 

environmental responsibility, and is a 

leading pioneer of systems to conserve 

and control water. In production, 

the Company recycles the majority 

of waste materials, and sets annual 

targets for energy efficiency audited by 

the certifying body. 

Passion and 

resourcefulness 

All Wavin personnel are committed to 

providing a comprehensive, responsive 

service – and are passionate about 

delivering total Customer satisfaction. 

Wavin Plastics Limited maintains an 

industry-wide dialogue and rigorous 

assessment of all procedures to ensure 

that Wavin product development and 

product support accurately addresses 

the needs of all Customers – today and 

into the future. 

TECHNICAL ENQUIRIES 

01249 766655 

SOIL & WASTE SYSTEMS 

TECHNICAL FAX 

01249 766653 

Introduction to OSMA – from Wavin 

EMAIL 

info@wavin.co.uk


Product Guide: Contents 

Contents 

Range Introduction 

OSMA Soil systems 4–5 

OSMA Waste systems 6-9 

OSMA Traps 10 

OSMA Overflow systems 10 

Estimating data 

Product Selector 

Easy-to-view guide to system 

11 

components and compatibility 12-13 

OSMA SOIL SYSTEMS 

PVC-U Ring-Seal Soil system: 

OsmaSoil 14-29 

PVC-U Solvent Weld Soil system: 

OsmaSoil 30-40 

PVC-U Soil system: 

WC Connectors 41-46 

PVC-U Soil system: Vents 47-48 

OSMA WASTE SYSTEMS 

ABS Solvent Weld Waste system: 

OsmaWeld 49-54 

MUPVC Solvent Weld 

Waste system 55-59 

OSMA SOIL & WASTE SYSTEMS Product Guide 2005 

www.wavin.co.uk 

PP Push-Fit system 

(BS EN 1451-1) 

PP Push-Fit system: 

60-62 

ClearBore (BS 5255) 63-66 

Waste system: Vents 67 

Waste system: V-Joint Traps 68-75 

OSMA OVERFLOW 

SYSTEMS 

PVC-U Solvent Weld Overflow system: 

OsmaWeld 76-78 

PP Push-Fit Overflow system: 

ClearBore 79-80 

ANCILLARIES 

Cleaner 81 

Cement 81 

Lubricant 81 

SPARES 

For Ring-Seal Soil 82 

For ClearBore Waste (BS 5255) 83 

General information 84-85 

REFERENCE 

General index 86-87 

Part No. index 89-91 

Rainwater Product data 92-93 

Further information data card 94 

Technical advice & assistance 95 

Further Information 

The following related publications are 

available for OSMA Soil & Waste systems: 

Design and Installation Guide 

Above Ground systems 

Trade Price List 

To obtain copies, please contact: 

Literature Requests 

Tel: 01249 766333 

Fax: 01249 766332 

Email: literature@wavin.co.uk 


Introduction to OSMA from Wavin . Contents 

3

4 

Introduction to 

the range 

SOIL SYSTEMS 

The OSMA range offers a choice of 

two soil systems to meet performance 

and installation requirements for all 

types of building, from single dwellings 

to large residential, commercial or 

industrial premises. 

In addition, OSMA WC Connectors 

provide efficient and reliable 

connection for all WC layouts. 


01249 766611 

Soil Systems 

PVC-U Ring-Seal 

Soil System: OsmaSoil 

Simple-to-use system: saves time 

and site costs 

Quick, efficient assembly by means of 

push-fit jointing and some solvent joints 

Available in 82, 110 and 160mm 

diameters 

Colour choice: Black, Grey, White and 

Brown (dependent on size/component) 

Manufactured in PVC-U to 

BS EN 1329-1:2000 


01249 766655 


TECHNICAL FAX 

01249 766653 

Range Introduction: Soil Systems 

Table 1: PVC-U Ring-Seal Soil system: Pipe Dimensions (mm) and Weights (kg/m) 

Nominal Size 

82 

110 

160 

Outside Diameter 

Min Max 

Wall Thickness 

Min Max 

Average 

Weight (kg/m) 

82.4 82.8 3.2 3.5 1.22 

110.0 110.4 3.2 3.5 1.64 

160.0 160.6 3.2 3.5 2.44 

Table 2: PVC-U Ring-Seal Soil system: Socket Dimensions (mm) 

Nominal Size 

82 

110 

160 

Internal Depth 

Ring-seal Solvent-weld 

Maximum Outside Diameter 

Ring-seal Solvent-weld 

51 43 104 89 

65 48 132 118 

88 58 192 168 

EMAIL 

info@wavin.co.uk




PVC-U Solvent Weld 

Soil System: OsmaSoil 

A secure method of jointing 

110 and 160mm pipes and fittings 

Colour choice: Black, Grey, Olive, 

White and Brown (dependent on 

size/component) 

Manufactured in PVC-U to 

BS EN 1329-1:2000 

Table 3: PVC-U Solvent Weld Soil system: Pipe Dimensions (mm) and Weights (kg/m) 

Nominal Size 

110 

160 

Nominal Size 

110 

160 




Min Max 


Min Max 

Average 

Weight (kg/m) 

110.0 110.4 3.2 3.5 1.64 

160.0 160.6 3.2 3.5 2.44 

Table 4: PVC-U Solvent Weld Soil system: Socket Dimensions (mm) 

WC Connectors 


Without Expansion Cap With Expansion Cap 

PVC-U WC Connectors 

Connectors for all WC configurations, 

including OSMA WC Manifold Branches, 

designed to connect up to 8 WCs 

onto 1 float. 


Without Expansion Cap With Expansion Cap 

48 65 121 126 

58 86 172 177 



5

6 


the range 

WASTE SYSTEMS 

Two push-fit joint systems and two 

solvent weld systems are available 

to meet all waste requirements. 

The systems fully co-ordinate with 

OSMA Soil systems and V-Joint Traps. 


01249 766611 

Waste Systems 

ABS Solvent Weld Waste 

System: OsmaWeld 

32, 40 and 50mm pipes and fittings 

Colour choice: Grey and White 

Manufactured in ABS (Acrilonytrile 

Butadiene Styrene) to BS 5255:1989 


01249 766655 


TECHNICAL FAX 

01249 766653 

Range Introduction: Waste Systems 

Table 5: ABS Solvent Weld Waste system: Pipe Dimensions (mm) and Weights (kg/m) 

Nominal Size 

32 

40 

50 


Min Max 


Min Max 

Average 

Weight (kg/m) 

36.15 36.45 1.8 2.2 0.23 

42.75 43.05 1.9 2.3 0.28 

55.75 56.05 2.0 2.4 0.40 

Table 6: ABS Solvent Weld Waste system: Socket Dimensions (mm) 

Nominal Size Internal Depth 


32 

40 

50 

18.16 41 

21.46 48 

27.24 61 

EMAIL 

info@wavin.co.uk



Waste Systems 


Waste System 


Colour choice: Black, Olive, 

White and Brown 

Fire retardant properties 

Manufactured in MUPVC (Modified 

Unplasticized Polyvinyl Chloride) 

to BS 5255:1989 

Table 7: MUPVC Solvent Weld Waste system: Pipe Dimensions (mm) and Weights (kg/m) 

Nominal Size 

32 

40 

50 




Min Max 


Min Max 

36.15 36.45 1.8 2.2 0.29 

42.75 43.05 1.9 2.3 0.36 

55.75 56.05 2.0 2.4 0.50 

Table 8: MUPVC Solvent Weld Waste system: Socket Dimensions (mm) 

Average 

Weight (kg/m) 



32 

40 

50 

18.16 41 

21.46 48 

27.24 62 

Introduction to Waste Systems continued overleaf 


Introduction: Waste Systems 

7

8 


the range 

WASTE SYSTEMS 

Two push-fit joint systems and two 

solvent weld systems are available 

to meet all waste requirements. 

The systems fully co-ordinate with 

OSMA Soil systems and V-Joint Traps. 


01249 766611 

Waste Systems 

PP Push-Fit Waste System 

(BS EN 1451-1) 



Quick, efficient assembly by means 

of push-fit jointing 


Colour choice: Black, Grey, Brown 

and White (32 and 40mm versions) 

50mm: Grey and White 

Manufactured in Polypropylene 

to BS EN 1451-1:2000 

NOTE: This range was formerly known 

as BS 5254 Waste 

Nominal Size 

32 

40 

50 


01249 766655 


DN/OD* Min Max 


TECHNICAL FAX 

01249 766653 


Table 9: PP Push-Fit Waste system: Pipe Dimensions (mm) and Weights (kg/m) 

32 

40 

50 


Min Max 

Average 

Weight (kg/m) 

34 34.4 34.8 1.8 2.2 0.187 

41 40.8 41.2 1.9 2.3 0.225 

54 53.9 54.3 2.0 2.4 0.335 

Table 10: PP Push-Fit Waste system: Socket Dimensions (mm) 

Nominal Size DN/OD* 

Internal Depth Maximum Outside Diameter 

*DN/OD as stated in BS EN 1451-1 Standard 

34 33 49 

41 34 55 

54 36 70 

EMAIL 

info@wavin.co.uk



Waste Systems 

PP Push-Fit Waste System: 

ClearBore (BS 5255) 



Quick, efficient assembly by means 

of push-fit jointing 


Colour: White only 

Manufactured in Polypropylene 

to BS 5255:1989 

Table 11: PP Push-Fit Waste system BS 5255: Pipe Dimensions (mm) and Weights (kg/m) 

Nominal Size 

32 

40 

50 




Min Max 


Min Max 

36.15 36.45 1.8 2.2 0.19 

42.75 43.05 1.9 2.3 0.24 

55.75 56.05 2.0 2.4 0.34 

Table 12: PP Push-Fit Waste system BS 5255: Socket Dimensions (mm) 

Average 

Weight (kg/m) 



32 

40 

50 

36 49 

36 56 

53 72 


Introduction: Waste Systems 

9

10 

Overflow Systems 


Overflow System: OsmaWeld 

19mm solvent weld system 

Colour choice: Grey and White 

Manufactured in PVC-U 

PP Push-fit Overflow 

System: ClearBore 

19mm push-fit system 



01249 766611 

Traps 

V-Joint Traps 

32, 40 and 50mm diameter domestic 

traps and accessories 

For use with all OSMA waste systems 

and with copper pipe 

Comprehensive range including tubular, 

bottle, bath and washing machine 

traps, and shower gullies 


Manufactured in Polyethylene 

to BS 3943:1983 

BS EN 1451-1:2000 plastic pipe should 

be first warmed in hot water before 

connection is made to the trap 

Table 13: V-Joint Traps: Socket Dimensions (mm) 

Nominal Size 

Nominal Size 


01249 766655 


Range Introduction: Traps ■ Overflow Systems 

Nominal Size Maximum Outside Diameter 


32 

40 

50 

Table 14: PVC-U Solvent Weld Overflow system: Pipe Dimensions (mm) and Weights (kg/m) 


Min Max 

19 22.9 23.2 1.3 1.6 0.145 

Table 16: PP Push-Fit Overflow system: Pipe Dimensions (mm) and Weights (kg/m) 


Min Max 

39 60 

40 66 

49 78 

19 21.64 21.89 1.2 1.4 0.075 

Table 17: PP Push-Fit Overflow system: Pipe Dimensions (mm) 

TECHNICAL FAX 

01249 766653 


Min Max 

Table 15: PVC-U Solvent Weld Overflow system: Socket Dimensions (mm) 

19 18 27 


Min Max 

19 27 26 

Average 

Weight (kg/m) 



Average 

Weight (kg/m) 



EMAIL 

info@wavin.co.uk


Range Introduction: Estimating Data ■ Jointing Material Allowances 

Estimating Data 

The following data is provided to help 

estimation of quantities required for pipe 

support and jointing. 

Pipe Support 

Pipes should be supported at the 

following maximum centres. 

Offset Bends 

Pipe Brackets should also be fitted 

around the Offset Bend or directly below. 

Jointing Material Allowances 

Lubricant Allowance 

For push-fit ring-seal joints (approximate figures) 

Table 19: Lubricant Usage Guide 

Description Part No. 

Silicone Lubricant 

50g tube 

Degreasing Cleaner/ 

Solvent Cement Allowances 

For solvent weld joints (approximate figures) 

Table 20: Cleaner/Solvent Cement Usage Guide 

Description Part No. 

Degreasing Cleaner 

No.1 125ml can 

Degreasing Cleaner 


Solvent Cement 





No.2 500ml tin 



Table 18: Maximum Pipe Support Centres 

Pipe Size (mm) Centres (m) 

Vertical Horizontal 

19 

0.5 0.5 

32 

40 

50 

82 

110 

160 

Nominal Pipe Sizes (mm) No. of Joints 

32 40 50 82 110 160 

4S391 44 37 20 16 9 4 

Nominal Pipe Sizes (mm) No. of Joints 

19 32 40 50 82 110 160 

4S379 120 70 45 33 25 16 10 

4S380 240 140 90 66 50 32 20 

4S383 90 45 30 20 8 5 3 

4S384 180 90 60 40 16 11 6 

4S385 360 180 120 80 32 22 12 

1.2 

1.2 

1.2 

2 

2 

2 

0.5 

0.5 

0.6 

1 

1 

1.2 


Introduction: Traps . Overflow . Estimating . Jointing 

11

12 

Soil & Waste Profiles 

OSMA Soil systems 

PVC-U Ring-Seal Soil 

PVC-U Solvent Weld Soil 

OSMA Waste systems 

ABS Solvent Weld Waste 

MUPVC Solvent Weld Waste 

PP Push-Fit Waste (BS EN 1451-1) 

PP ClearBore Waste (BS 5255) 

OSMA Overflow systems 


PP Push-Fit 

Other Fittings 

OsmaLink Soil Manifold 

For use with waste pipes 

Manifold Branches 

(for connection of up to 8 WCs) 

– Straight – 8º 

– 151 /2º – 23º 

– 301 /2º – 38º 


01249 766611 

BGE 

WN 

BGE 

WN 

B G E 

W N 

B G E 

WN 

BGE 

WN 

BGE 

W N 

B G E 

W N 

BGE 

W N 

Colour 


01249 766655 

SOIL & WASTE SYSTEM SELECTOR 

Pipe 

19mm 

32mm 

Key Fittings 

40mm 

50mm 

82mm 

110mm 

160mm 

TECHNICAL FAX 

01249 766653 

Pipe 

Clip 

Brackets 

Socket 

Pipe or Socket 

Suspended 

Push-Fit 

Solvent Weld 

Push-Fit/SW 

Sockets 

- - - - ■ ■ ■ ■ - ■ ■ ■ ■ ■ ■ 

- - - - - ■ ■ ■ - ■ ■ ■ - ■ ■ 

- ■ ■ ■ - - - ■ ■ - - - - ■ ■ 

- ■ ■ ■ - - - ■ - - - - - ■ ■ 

- ■ ■ ■ - - - ■ - - - - ■ - - 

- ■ ■ ■ - - - ■ ■ - - - ■ - - 

■ - - - - - - - ■ - - - - ■ - 

■ - - - - - - - ■ - - - ■ - - 

WC Connectors 

For use with Push-Fit and Solvent Weld 

Soil systems: 

Connectors (for BS 5503 WCs) 

– 21 /2º – 14º 

– 90º – 90º (Access) 

Connectors (for BS 1213 WCs) 

– Straight – 871 /2º 

Easy-Fit Pan Connectors 

(for BS 1213 WCs) 

– Straight – Offset 

– 14º – 90º 

Vents 

– Air Admittance Valves (110mm and 40mm) 

– Terminal Fittings 

– Pipe Flashings (pitched and flat roof) 

– Roof Outlets 

Traps 

For use with all OSMA Waste systems. 

Trap types: 

– Bottle – Tubular 

– Bath – Shower 

– Washing Machine 

Fire Stop Seals 

For 50, 82, 110 and 160mm pipework 

EMAIL 

sales@wavin.co.uk

SOIL & WASTE SYSTEM SELECTOR 

Key Downpipes 

Fittings 

Key* 

Connectors 

a b c 

a b 

d e f 

g h j 

d e f 

g h j 

e 

d e f 

g h j 

d x 

x 

(See KEY)* 

Connectors 

Reducers 

t u v w 

u v w 

m n p 

q r s 

m n p 

q r s 

m n p 

m n p 

q r 



- 

- 

(See KEY)* 

90° 

871/2° 76° 

Bends 

a Connector to Cast-Iron Socket 

b Connector to Cast-Iron Spigot 

c Connector to Cast-Iron or Clay 

Drain Socket 

d Straight Tank Connector 

e Universal Connector 

f Male Iron Connector 

g Female Iron Connector 

h Connector to BS 659 Copper 

Spigot – Compression Joint 

j Connector to BS 659 Copper 

Compression Fitting 

k Universal Compression Connector 

671/2° 45° 

30° 

15° 

111/4° Offset 

90° 

30° 

Adjust. 

Equal/Tee 

Unequal 

Branches 

Single 

Equal/Cross 

45° 

Unequal 

Double 

Corner 


System Selector 

Pipe 

Bend 

- ■ ■ ■ ■ ■ ■ - ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 

- ■ - ■ ■ - ■ ■ ■ - - ■ ■ ■ - - ■ ■ ■ ■ ■ 

■ ■ - - ■ - - - - - - ■ - ■ - - - - - - - 

■ ■ - - ■ - - - - - - ■ - - - - - - - - - 

■ ■ - - ■ - - - - - - ■ - - - - - - - - - 

■ ■ - - ■ - - - - - - 

■ - - - ■ - - - - - - 

Access 

■ - - - - - - - - - 

- - - - - - - - - - 

■ - - - ■ - - - - - - - - - - - - - - - - 

Reducers 

m Reducer 40 to 32mm 

n Reducer 50 to 32mm 

p Reducer 50 to 40mm 

q Reducer to 19mm Overflow 

r Reducer to 35mm copper pipe 

s Reducer to 42mm copper pipe 

t Reducer 82 to 50mm 

u Reducer 110 to 50mm 

v Reducer 110 to 82mm 

w Reducer 160 to 110mm 

x Bent Tank Connector 

Colour Key 

*NOTE: Guide only. Some connectors not 

available in more than one size. Some waste 

connectors and reducers listed are available 

in two versions. Check listings to ensure 

availability of suitable fitting 

Branch 

Bossed Pipe 

Colour Ref. Code 

Black B 

Grey G 

Olive E 

White W 

Brown N 

13

14 

Pipe 


01249 766611 

B 

PVC-U RING-SEAL SOIL SYSTEM: OsmaSoil 

A 


01249 766655 

Socketed Pipe 

Colour References: B - Black, G - Grey, E - Olive, W - White, N - Brown 

TECHNICAL FAX 

01249 766653 

Pipe 

z One plain end, one ring-seal socket 

MATERIAL: PVC-U, with EPDM seals 

NOM. PART DIMENSIONS: (OD) 

SIZE NO. COLOURS LENGTH [m] A [mm] B [mm] 

82 3S042 BGOWN 2 51 104 

82 3S043 BGOWN 3 51 104 

82 3S044 BGOWN 4 51 104 

110 4S042 BGOWN 2 65 132 

110 4S050 BGOWN 2.5 65 132 

110 4S043 BGOWN 3 65 132 

110 4S044 BGOWN 4 65 132 

160 6S043 BGOWN 3 88 191 

160 6S044 BGOWN 4 88 191 

Plain-Ended Pipe 

MATERIAL: PVC-U 

NOM. PART DIMENSIONS: 

SIZE NO. COLOURS LENGTH [m] 

82 3S074 BGEWN 4 

110 4S073 BGEWN 3 

110 4S074 BGEWN 4 

160 6S074 BGEWN 4 

EMAIL 

info@wavin.co.uk


Brackets 

Brackets 



Pipe Bracket 

z For support centres, see page 11 


NOM. PART DIMENSIONS [mm] FIXING 

SIZE NO. COLOURS A B C D HOLE 

82 3S082 BG 76 92 112 16 6.5 DIA. 

110 4S082 BGEWN 94 120 140 25 6.5 DIA. 

160 6S082 BGE 123 175 200 32 8.0 DIA. 

Socket Bracket 

z Position in the recessed area adjacent to the sealing-ring 

housing 





82 3S083 BG 78 120 140 28.5 6.5 DIA. 


z Position in the recessed area adjacent to the sealing-ring 

housing 





110 4S083 BGEWN 94 120 140 25 6.5 DIA. 

Pipe or Socket Bracket 

z Multi-functional support component that can be used for pipes 

or sockets 

z When using as a socket bracket, always position unit in the 

recessed area adjacent to the sealing-ring housing 


MATERIAL: BZP-coated steel 


SIZE NO. A B C D HOLE 

82 3S084 B 78 120 140 16 7 DIA. 

110 4S084 94 160 180 20 7 DIA. 

160 6S084 124 220 240 25 7 DIA. 


Pipe ■ Brackets 

15

16 

Suspended Brackets 


01249 766611 

Threaded Rod 

Threaded Bracket 

Bracket Plate 

Adjustable Brace 

Pipe/Socket Bracket 



01249 766655 

TECHNICAL FAX 

01249 766653 


Adjustable Pipe Bracket Assembly 

z Pack contains Threaded Rod, Threaded Bracket, Bracket Plate, 

and Pipe/socket Bracket 


MATERIAL: BZP-coated mild steel 

NOM. PART 

SIZE NO. 

110 4S086 

160 6S086 

Adjustable Socket Bracket and 

Brace Assembly 


two Adjustable Braces, and Pipe/Socket Bracket 



NOM. PART 

SIZE NO. 

110 4S085 

160 6S085 

COMPONENTS: 

M8 Threaded Rod 


NOM. PART DIMENSIONS [mm] 

SIZE NO. A DIAMETER 

- - 500 8 




SIZE NO. A B C 

- - 120 40 30 

Bracket Plate 



SIZE NO. A B C D 

- - 240 110 20 80 


z Used for creating anchor points 



SIZE NO. A (min) A (max) B 

- - 264 493 260 





110 - 94 160 180 20 7 DIA. 

160 - 124 220 240 25 7 DIA. 


EMAIL 

info@wavin.co.uk


Sockets ■ Connectors 

Sockets 

Connectors 



S/SW Single Socket 

z One solvent weld socket and one push-fit ring-seal socket 

z Used for creating a fixed ring-seal joint on a plain-ended pipe or 

fitting, or where an expansion joint is required to accommodate 

thermal movement 



SIZE NO. COLOURS A B 

82 3S124 BG 97 2 

110 4S124 BGEWN 115 2 

160 6S124 BG 135 2 

D/S Double Socket 

z Push-fit ring-seal socket at each end 

z Used as a slip coupler for making repairs 



SIZE NO. COLOURS A 

82 3S105 BG 102 

110 4S105 BGEWN 119 

160 6S105 BGEWN 145 

D/SW Double Socket 

z Solvent weld socket at each end 




110 4S104 BGEWN 98 2 

160 6S104 BGEWN 119 3 

S/S Connector to Cast-Iron Socket 

z Connector to BS 416 cast-iron soil socket 



SIZE NO. COLOUR A B 

10 4S106 BGEWN 162 123 

S/S Connector to Cast-Iron or 

Clay Drain Socket 

z Connector to BS 1211 or BS 437 cast-iron socket or BS 65 

clay drain socket 



SIZE NO. COLOUR A B C 

110 4S107 BGEWN 121 51 134 

Connectors continued overleaf 


Suspended Brackets ■ Sockets ■ Connectors 

17

18 

Connectors continued 

Reducers 

Bends 


01249 766611 



01249 766655 

TECHNICAL FAX 

01249 766653 

Connectors ■ Reducers ■ Bends 

P/E Connector to Cast-Iron Spigot 

z Heat-shrink connector to BS 416 cast-iron spigot 

z Use 2 x 3S130 Seals with 82mm connector 

z Use 1 x 4S119 with 110mm connector 

z Use 2 x 6S130 Seals with 160mm connector 


NOM. PART DIMENSIONS [mm] Cast-Iron Spigot OD 

SIZE NO. COLOURS A B (min) B (max) 

82 3S134 BGEWN 325 80 105 

110 4S134 BGEW 300 108 125 

160 6S134 BGEWN 330 158 185 

Gasket 

z For use with Connector 4S134 (above) 

MATERIAL: Neoprene synthetic rubber 

NOM. PART 

SIZE NO. COLOUR 

110 4S119 BGE 

Connector to Cast-Iron Socket 



NOM. PART DIMENSION [mm] 

SIZE NO. COLOUR A 

110 4S206 BGEWN 66 

S/S Reducer 




82x50 3S094 BGEWN 119 68 

S/S Reducer 




110x50 4S096 BGEWN 103 53 

110x82 4S095 BGEWN 103 53 

160x110 6S099 BGEWN 127 70 

S/S Bend – 87 1 /2° 

z One plain end and one push-fit ring-seal socket 




82 3S161 BGEWN 128 125 

110 4S161 BGEWN 162 160 

160 6S161 BGEWN 240 247 


EMAIL 

info@wavin.co.uk


Bends 

Bends continued 



S/SW Bend – 87 1 /2° 



NOM. PART DIMENSION [mm] 


110 4S361 BGEWN 160 160 

S/S Bend – 76° 





110 4S164 BGEWN 146 148 180 

S/S Bend – 671 /2 ° 




SSIZE NO. COLOUR A B C 

82 3S162 BGEWN 132 121 180 

110 4S162 BGEWN 155 154 212 

160 6S162 BGEWN 177 168 240 





SIZE NO. COLOURS A B C 

82 3S163 BGEWN 97 87 156 

110 4S163 BGEWN 98 105 174 

160 6S163 BGEWN 140 118 215 

S/SW Bend – 45° 





110 4S363 BGEWN 98 86 155 






110 4S166 BGEWN 92 95 162 


Connectors ■ Reducers ■ Bends 

Bends continued overleaf 

19

20 


Adjustable Bends 

Offset Bends 


01249 766611 



01249 766655 

Bends ■ Adjustable Bends ■ Offset Bends 






110 4S167 BGEWN 92 93 180 

Adjustable Bend – 90° 


z Variable angle up to 90° 

z Can accommodate up to 60mm centre-line to centre-line 

misalignment of pipework 

z Rotate segments to achieve required change of direction 

(flow arrow on socket indicates orientation of fitting) 

z BBA certificated (Certificate No. 89/2174) 

MATERIAL: Polypropylene, with EPDM seals 



110 4S179 BGEWN 167 165 

Adjustable Bend – 30° 


z Variable angle up to 30° 

z Rotate segments to achieve required change of direction 

(flow arrow on socket indicates orientation of fitting) 


MATERIAL: Polypropylene, with EPDM seals 



110 4S173 BGEWN 97 90 180 

SW/S Offset Bend – 67 1 /2° 


z Minimum achievable offsets: 

82 115mm 110 137mm 160 233mm 




82 3S435 BGEWN 92 87 123 

110 4S435 BGEWN 99 105 143 

160 6S435 BGEWN 170 169 230 

S/SW Offset Bend – 67 1 /2° 



82 115mm 110 137mm 160 233mm 




82 3S440 BGEWN 95 87 123 

110 4S440 BGEWN 110 99 140 

160 6S440 BGEWN 177 160 225 


TECHNICAL FAX 

01249 766653 

EMAIL 

info@wavin.co.uk


Offset Bends ■ Soil Manifold System 

Offset Bends continued 

Soil Manifold System 



S/S Offset Bend – 67 1 /2° 



82 115mm 110 137mm 




82 3S444 BGEWN 95 87 123 

110 4S444 BGEWN 110 105 147 

D/S Offset Bend – 67 1 /2° 

z Fitted with two push-fit ring-seal sockets 

z Minimum achievable offset: 137mm 




110 4S445 BGEWN 110 110 155 

OsmaLink Soil Manifold 


z Permits up to three 50mm connections to be made at floor level 

z Complies with BS EN 12056-2:2000 clause ND. 3.3.2 

z Make connections using 2S354 (below), 2S355 

or 2S356 (page 22) 

z Minimum installation aperture: 240mm square 



SIZE NO. COLOUR A B C D 

110 4S595 BGEWN 138 55 160 275 

All-Fit Reducer – 40:32mm 

z Connects to 32mm [1 1 /2"] plastic pipe to 

BS EN 1451-1/BS 5254 or BS 5255, 

or to copper pipe manufactured to BS 659 or BS 2871 

z Use with 2S355 (below) when a bend is required 

MATERIAL: Polypropylene 



40 2S354 BGEWN 54 

All-Fit Reduction Bend – 50:40mm 

z Connects to 40mm [1 1 /2"] plastic pipe to 

BS EN 1451-1/BS 5254 or BS 5255, or to copper pipe 

manufactured to BS 659 or BS 2871 




50 2S355 BGEWN 70 65 

Soil Manifold System continued overleaf 


Bends ■ Adjustable Bends ■ Offset Bends ■ Soil Manifold System 

21

22 

Soil Manifold System continued 

Single Branches 

See Design and Installation Guide and BS EN 12056:2000 on the prevention of crossflow 


01249 766611 



01249 766655 

Soil Manifold System ■ Single Branches 

All-Fit 90° Spigot Bend – 50:40mm 

z Connects to 50mm [2"] plastic pipe to 

BS EN 1451-1/BS 5254 or BS 5255, or to copper pipe 


MATERIAL: ABS 



50 2S356 BGEWN 79 64 

S/S Single Branch – 87 1 /2º 

z One plain end and two push-fit ring-seal sockets 

z With closed boss socket positions: two on 82mm and 160mm 

fittings, three on 110mm fitting 




82 3S190 BGEWN 155 118 146 

110 4S190 BGEWN 150 120 142 

160 6S190 BGEWN 230 170 230 

S/S Single 5-Boss Branch – 87 1 /2º 


z Five closed boss sockets, of which two are positioned 

84mm below the centre-line of the branch entry. These can 

be used for low-level waste connections (as alternative to 

Soil Manifold 4S595) 



SIZE NO. COLOURS A B C D 

110 4S195 BGEWN 150 118 84 114 

S/SW Single 5-Boss Branch – 87 1 /2º 

z One solvent weld socket and two push-fit ring-seal sockets 

z Five closed boss sockets, of which two are positioned 84mm 

below the centre-line of the branch entry. These can be used for 

low-level waste connections (as alternative to Soil Manifold 4S595) 




110 4S395 BGEWN 150 118 84 98 


TECHNICAL FAX 

01249 766653 

EMAIL 

info@wavin.co.uk



Single Branches continued 




S/S Unequal Single Branch – 87 1 /2º 

z One 160mm plain end/push-fit ring-seal socket, and one 

110mm push-fit ring-seal socket on the branch 

z Two closed boss socket positions 




160 6S198 BGEWN 176 148 156 

S/S Single Branch – 76º 


z Three closed boss socket positions 




110 4S220 BGEWN 161 159 155 

S/S Single Branch – 67 1 /2 º 


z 110mm fitting has two closed boss socket positions. 82mm 

fitting has none 




82 3S200 BGEWN 132 121 121 

110 4S200 BGEWN 160 159 155 

S/S Single Branch – 45º 





110 4S210 BGEWN 142 220 68 


Soil Manifold System ■ Single Branches 

23

24 

Double Branches 

Corner Branch 



01249 766611 



01249 766655 

TECHNICAL FAX 

01249 766653 

Double Branches ■ Corner Branch 

S/S Double Branch – 87 1 /2 º 

z One plain end and three push-fit ring-seal sockets 


z Do NOT use for connecting back-to-back WCs in horizontal 

float installations: see relevant parts of BS EN 12056:2000 




110 4S230 BGEWN 146 120 142 

S/S Unequal Double Branch – 87 1 /2 º 

z One 160mm plain end/push-fit ring-seal socket, and two 

110mm push-fit ring-seal sockets on the branch 





160 6S238 BGEWN 176 147 156 

S/S Double Branch – 45º 





110 4S250 BGEWN 147 178 99 

S/S Corner Branch – 87 1 /2º 


z One closed boss socket position 




110 4S291 BGEWN 190 120 144 


EMAIL 

info@wavin.co.uk


Bossed Pipes 

Bossed Pipes 




S/S Bossed Pipe 


z One open boss socket position 




82 3S649 BGEWN 67 90 86 



z Three closed boss socket positions and one open to receive 

appropriate Boss Socket Adaptor (page 27) 




110 4S589 BGEWN 74 126 126 

160 6S589 BGEWN 100 147 142 


z Connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] plastic pipe 

to BS 1451-1/BS 5254 or BS 5255, or to copper pipe 



z Three closed boss socket positions and one open, fitted with 

Adaptor 2S398 or 2S399 (page 27) 




110x32 4S581 BGEWN 106 119 128 

110x40 4S582 BGEWN 106 119 128 

D/SW Ring-Seal Bossed Pipe 

z Connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] plastic pipe 

to BS 1451-1/BS 5254 or BS 5255, or to copper pipe 


z Two solvent weld sockets 

z One push-fit socket position 




110x32 4S583 BGEWN 96 150 

110x40 4S584 BGEWN 96 150 

Bossed Pipes continued overleaf 


Double Branches ■ Corner Branch ■ Bossed Pipes 

25

26 

Bossed Pipes continued 

Strap Bosses 


01249 766611 


C B 

A 



01249 766655 

S/SW Bossed Pipe 

TECHNICAL FAX 

01249 766653 

Bossed Pipes ■ Strap Bosses 



appropriate Boss Socket Adaptor (page 27) 




110 4S590 BGEWN 81 121 108 

D/SW Short Bossed Pipe 

z Three closed boss socket positions for use with the appropriate 

Boss Socket Adaptor (page 27) 

z Three closed 40mm [1 1 /2"] spigot tail positions also allow for 

direct connection of 40mm [1 1 /2"] solvent weld sockets 




110 4S588 BGEWN 56 43 124 

Strap Boss 

z For making side connections on BS EN 1329 plastic pipe 

after construction 




82 3S319 BGEWN 63 

110 4S319 BGEWN 77 

Back-to-Back Strap Boss 






110 4S318 BGEWN 80 


EMAIL 

info@wavin.co.uk


Boss Socket Adaptors ■ Access Fittings 

Boss Socket Adaptors 

Access Fittings 



S/S Ring-Seal Boss Adaptor 

z Suitable for all OsmaSoil fittings with boss socket positions 

z Connects to 32mm [11 /4"], 40mm [11 /2"] or 50mm [2"] plastic pipe 

to BS EN 1451-1/BS 5254 or BS 5255, or to copper pipe 


z Horizontal adaptors have an inbuilt 21 /2° fall 




32 2S398 BGEWN 50 27 

40 2S399 BGEWN 53 30 

S/S Ring-Seal Boss Adaptor 

z Suitable for all OsmaSoil fittings with boss socket positions 

z Connects to 32mm [11 /4"], 40mm [11 /2"] or 50mm [2"] plastic pipe 

to BS EN 1451-1/BS 5254 or BS 5255, or to copper pipe 






50 2S402 BGEWN 70 52 

S/S Ring-Seal Boss Adaptor - 90° 

z Suitable for all OsmaSoil fittings incorporating boss 

socket positions 

z Connects to 50mm [2"] plastic pipe to BS 5255 or use 

with Long Tail Bend 2Z359 

MATERIAL: ABS 



50 2S360 BGEWN 50 31 

S/S Access Pipe 


z Fitted with bolted, oval access door 




82 3S274 BGEWN 202 

See Design and Installation Guide and BS EN 12056:2000 on the prevention of crossflow and the provision of access 

Access Fittings continued overleaf 


Bossed Pipes ■ Strap Bosses ■ Adaptors ■ Access Fittings 

27

28 

Access Fittings continued 


01249 766611 



01249 766655 

S/S Bossed Access Pipe 


z Three closed socket boss positions 

z Fitted with screwed access cover 

S/SW Bossed Access Pipe 

TECHNICAL FAX 

01249 766653 


z Spares available as follows: Access Liner 4S902, 

Access Cap 4S904, Access Cap Gasket 4S992 (page 82) 




110 4S274 BGEWN 95 118 114 

160 6S274 BGEWN 124 155 150 


z Three closed socket boss positions 


z Spares available as follows: Access Liner 4S902, Access Cap 

4S904, Access Cap Gasket 4S992 (page 82) 




110 4S374 BGEWN 95 118 114 

S/S Access Bend – 871 /2° 








110 4S169 BGEWN 163 80 162 

S/SW Access Bend – 87 1 /2° 








110 4S369 BGEWN 163 80 160 



EMAIL 

info@wavin.co.uk


Access Fittings ■ Plugs 


Plugs 



S/S Access Branch – 87 1 /2° 


z Two closed socket boss positions 







110 4S502 BGEWN 170 110 172 

Access Saddle 

z For providing access to BS EN 1329 plastic pipe after 

construction, or where an access pipe or branch is not suitable 







110 4S275 BGEWN 103 35 35 

P/E Access Plug 

z Fits into a ring-seal socket to provide an access point 




82 3S292 BGEWN 56 100 

110 4S292 BGEWN 50 132 

160 6S292 BGEWN 58 188 

P/E Socket Plug 

z With one closed boss socket position 

z Fits into a ring-seal socket to provide a connection point for a 

32mm [11 /4"], 40mm [11 /2"] or 50mm [2"] waste pipe connection 

when fitted with the appropriate Boss Socket Adaptor (page 27) 




110 4S296 BGEWN 54 132 



Access Fittings ■ Plugs 

29

30 

Pipe 

Brackets 


01249 766611 


01249 766655 

PVC-U SOIL SYSTEM: Solvent Weld 



NOM. PART DIMENSIONS [m] 

SIZE NO. COLOURS LENGTH 

110 4S073 BGEWN 3 

110 4S074 BGEWN 4 

160 6S074 BGEWN 4 

Pipe Bracket 



TECHNICAL FAX 

01249 766653 

Pipe ■ Brackets 





110 4S082 BGEWN 94 120 140 25 6.5 DIA. 

160 6S082 BGEWN 123 175 200 32 8.0 DIA. 

z Position in the recessed area adjacent to the 

sealing-ring housing 





110 4S083 BGEWN 94 120 140 25 6.5 DIA. 

z Multi-functional support component that can be used for pipes 

or sockets 

z When using as a socket bracket, always position unit in the 

recessed area adjacent to the sealing-ring housing 


MATERIAL: BZP-coated steel 



110 4S084 BGEWN 94 160 180 20 7 DIA. 

160 6S084 BGEWN 124 220 240 25 7 DIA. 


EMAIL 

info@wavin.co.uk






Threaded Rod 


Bracket Plate 


Pipe/Socket Bracket 

Adjustable Pipe Bracket Assembly 


and Pipe/socket Bracket 



NOM. PART 

SIZE NO. 

110 4S086 

160 6S086 

Adjustable Socket Bracket and 

Brace Assembly 


two Adjustable Braces, and Pipe/Socket Bracket 



NOM. PART 

SIZE NO. 

110 4S085 

160 6S085 

COMPONENTS: 

M8 Threaded Rod 



SIZE NO. A DIAMETER 

- - 500 8 




SIZE NO. A B C 

- - 120 40 30 

Bracket Plate 



SIZE NO. A B C D 

- - 240 110 20 80 


z Used for creating anchor points 



SIZE NO. A (min) A (max) B 

- - 264 493 260 





110 - 94 160 180 20 7 DIA. 

160 - 124 220 240 25 7 DIA. 


Pipe ■ Brackets ■ Suspended Brackets 

31

32 

Sockets 

Connectors 


01249 766611 


01249 766655 


S/SW Single Socket 

D/S Double Socket 

z Push-fit ring-seal socket at each end 

TECHNICAL FAX 

01249 766653 

Sockets ■ Connectors 


z Used for creating a fixed ring-seal joint on a plain-ended pipe or 

fitting, or where an expansion joint is required to accommodate 





110 4S124 BGEWN 115 2 

160 6S124 BGEWN 135 2 

z Used as a slip coupler for making repairs 




110 4S105 BGEWN 119 

160 6S105 BGEWN 145 

D/SW Double Socket 

z Solvent weld socket at each end 




110 4S104 BGEWN 98 2 

160 6S104 BGEWN 119 3 

P/E Connector to Cast-Iron Spigot 

z Heat-shrink connector to BS 416 cast-iron spigot 

z Use 1 x 4S119 with 110mm connector 

z Use with 2 x 6S130 Seals with 160mm connector 


NOM. PART DIMENSIONS [mm] Cast-Iron Spigot OD 

SIZE NO. COLOURS A B (min) B (max) 

110 4S134 BGEW 300 108 125 

160 6S134 BGEWN 330 158 185 

Gasket 

z For use with Connector 4S134 

MATERIAL: Neoprene Synthetic Rubber 

NOM. PART 

SIZE NO. 

110 4S119 


EMAIL 

info@wavin.co.uk


Connectors ■ Reducers ■ Adaptor 


Reducers 

Adaptor 



Connector to Cast-Iron Socket 




SIZE NO. A 

110 4S206 66 

SW/S Reducer 

z Spigot connects to 110mm PVC-U solvent weld socket 

to BS EN 1329 

z Socket connects to 50mm ABS or MUPVC solvent weld 

pipe to BS 5255 




110x50 4S496 BGEWN 89 50 

S/S Reducer 


to BS EN 1329 

z Ring-seal socket connects to 82mm PVC-U pipe to 

BS EN 1329 




110x82 4S095 BGEWN 103 53 

SW/S Reducer 


to BS EN 1329 

z Solvent weld socket connects to 110mm PVC-U pipe 

to BS EN 1329 




160x110 6S499 BGEWN 117 65 

Expansion Cap 

z With integral ring-seal 

z Converts OSMA Solvent Weld Soil sockets to push-fit 

expansion sockets 

z See Design and Installation Guide for advice on 

accommodating thermal movement 




110 4S416 BGEWN 22 

160 6S416 BGEWN 27 


Sockets ■ Connectors ■ Reducers ■ Adaptor 

33

34 

Bends 


01249 766611 

TECHNICAL ENQUIRI-ES 

01249 766655 


D/SW Bend – 871 /2 ° 





110 4S461 BGEWN 152 166 

160 6S461 BGEWN 231 232 

D/SW Bend – 67 1 /2° 





110 4S462 BGEWN 141 138 192 

D/SW Bend – 45° 





110 4S463 BGEWN 87 87 148 

160 6S463 BGEWN 128 111 204 

SW/S Long-Tail Bend – 87 1 /2° 

z One plain end and one solvent weld socket 




110 4S260 BGEWN 115 195 

S/SW Bend – 45° 





110 4S263 BGEWN 87 105 167 

S/SW Bend – 11 1 /4 ° 





110 4S268 BGEWN 75 88 162 

TECHNICAL FAX 

01249 766653 

Bends 


EMAIL 

info@wavin.co.uk


Offset Bends ■ Single Branches 

Offset Bends 





SW/S Offset Bend 


z Minimum achievable offset: 137mm 




110 4S435 BGEWN 99 105 143 

D/SW Offset Bend 


z Minimum achievable offsets: 196mm 




110 4S450 BGEWN 108 102 123 

D/SW Single Branch – 87 1 /2 º 

z Three solvent weld sockets 

z Three closed boss socket positions on 110mm fitting. 

160mm fitting has none 




110 4S490 BGEWN 159 112 152 

160 6S490 BGEWN 222 161 240 

SW/S Single Branch – 87 1 /2 º 

z One plain end and two solvent weld sockets 





110 4S290 BGEWN 159 112 167 

D/SW Single 5-Boss Branch – 87 1 /2 º 


z Five closed boss socket positions, of which two are positioned 

84mm below the centre-line of the branch entry. These can be 

used for low-level waste connections 




110 4S495 BGEWN 139 108 84 99 


Bends ■ Offset Bends ■ Single Branches 

Single Branches continued overleaf 

35

36 

Single Branches continued 

Double Branch 

Corner Branch 



01249 766611 


01249 766655 


Single Branches ■ Double Branch ■ Corner Branch 

D/SW Single Branch – 45º 





110 4S410 BGEW 136 192 85 

D/SW Unequal Single Branch – 87 1 /2 º 

z Two 160mm solvent weld sockets 

z One 110mm solvent weld socket on the branch 





160 6S498 BGEWN 167 130 155 

D/SW Double Branch – 87 1 /2 º 

z Four solvent weld sockets 


z Do NOT use for connecting back-to-back WCs in horizontal 

float installations: see relevant parts of BS EN 12056:2000 




110 4S430 BGEWN 141 110 144 

SW/S Corner Branch – 87 1 /2 º 

z One plain end and three solvent weld sockets 





110 4S491 BGEWN 179 113 144 


TECHNICAL FAX 

01249 766653 

EMAIL 

info@wavin.co.uk


Bossed Pipes 

Bossed Pipes 



C B A 


D/SW Bossed Pipe 


z One solvent weld socket for 32mm [1 1 /4"] or 40mm [1 1 /2"] solvent 

weld plastic pipe to BS 5255 




110x32 4S483 BGEWN 74 150 

110x40 4S484 BGEWN 77 150 

D/SW Bossed Pipe 



appropriate Boss Socket Adaptor 




110 4S586 BGEWN 75 106 109 

D/SW Short Bossed Pipe 

z Three closed boss socket positions for use with the appropriate 

Boss Socket Adaptor 

z Three closed 40mm spigot tail positions also allow for direct 

connection of 40mm solvent weld sockets 




110 4S588 BGEWN 56 43 124 

S/SW Bossed Pipe 







110 4S590 BGEWN 75 121 108 

SW/S Bossed Pipe 







110 4S585 BGEW 75 106 126 


Branches ■ Bossed Pipes 

37

38 

Strap Boss 

Boss Socket Adaptor 



01249 766611 


01249 766655 


Strap Boss ■ Boss Socket Adaptor ■ Access Fittings 

Strap Boss 






110 4S319 BGEWN 77 

SW/S Solvent Weld Boss Adaptor 

z Suitable for all OsmaSoil fittings incorporating boss 

socket positions 

z Connects to 32mm [11 /4"], 40mm [11 /2"] or 50mm [2"] solvent 

weld plastic pipe to BS 5255. 





32 2S298 BGEWN 41 20 

40 2S299 BGEWN 45 24 

50 2S403 BGEWN 53 30 

SW/S Bossed Access Pipe 









110 4S574 BGEWN 75 107 118 

160 6S474 BGEWN 124 132 150 

D/SW Bossed Access Pipe 









110 4S474 BGEWN 85 107 114 



TECHNICAL FAX 

01249 766653 

EMAIL 

info@wavin.co.uk






D/SW Access Bend – 87 1 /2 ° 








110 4S469 BGEWN 152 80 166 

D/SW Access Branch – 871 /2 ° 









110 4S493 BGEW 159 112 152 

Access Saddle 

z For providing access to BS EN 1329 plastic pipe after 

construction, or where an access pipe or branch is not suitable 







110 4S275 BGEWN 103 35 35 



Strap Boss ■ Boss Socket Adaptor ■ Access Fittings 39

40 

Plugs 

See Design and Installation Guide and BS EN 12056:2000 on the provision of access 


01249 766611 


01249 766655 



z Fits into a solvent weld socket to provide an access point 





110 4S292 BGEWN 50 137 

160 6S292 BGEWN 58 195 

SW/S Access Plug 

z Glues over a pipe spigot to provide an access point 





110 4S492 BGEWN 50 137 

P/E Socket Plug 


TECHNICAL FAX 

01249 766653 

Plugs 

z Fits into a solvent weld socket to provide a connection point for 

a 32mm [1 1 /4"], 40mm [1 1 /2"] or 50mm [2"] waste-pipe 

connection when fitted with the appropriate boss socket 

adaptor 




110 4S296 BGEWN 54 132 


EMAIL 

info@wavin.co.uk

PVC-U SOIL SYSTEMS: WC Connectors 

WC Manifold Branches 

WC Manifold Branches (incorporating gasket) 



S/SW Manifold Branch – Straight 

z One solvent weld and one push-fit socket 


NOM. PART DIMENSIONS [mm] EFFECTIVE 

SIZE NO. COLOUR A LENGTH 

110 4S601 BGEWN 180 132 

S/SW Manifold Branch – 8° 

z One solvent weld and one push-fit socket (right hand illustrated) 



SIZE NO. COLOUR A B LENGTH 

110 LH 4S602 BGEWN 180 16 132 

110 RH 4S612 BGEWN 180 16 132 

S/SW Manifold Branch – 15 1 /2° 





110 LH 4S603 BGEWN 180 32 132 

110 RH 4S613 BGEWN 180 32 132 






110 LH 4S604 BGEWN 180 48 132 

110 RH 4S614 BGEWN 180 48 132 

S/SW Manifold Branch – 30 1 /2° 





110 LH 4S605 BGEWN 180 64 132 

110 RH 4S615 BGEWN 180 64 132 

NOTE: All Manifold Branches are fitted with a gasket for direct connection to the outlets of WC’s manufactured to BS 5503 


WC Manifold Branches continued overleaf 


WC Manifold Branches (Also Solvent Weld Soil: Plugs) 41

42 

WC Manifold Branches continued 

WC Connectors (incorporating gasket) 


01249 766611 


01249 766655 


WC Manifold Branches ■ WC Connectors (for BS 5503) 






110 LH 4S606 BGEWN 180 80 132 

110 RH 4S616 BGEWN 180 80 132 

P/E Connector – 2 1 /2 ° 

z One plain end 




110 4S791 BGEWN 55 63 

SW/S Connector – 2 1 /2 ° 

z One solvent weld socket 




110 4S792 BGEWN 55 63 

P/E Connector – 14° 





110 4S711 BGEWN 55 63 

SW/S Connector – 14° 





110 4S712 BGEWN 55 63 

NOTE: Manifold Branches and WC Connectors are fitted with a gasket for direct connection to the outlets of WC’s manufactured to BS 5503 


TECHNICAL FAX 

01249 766653 

EMAIL 

info@wavin.co.uk


WC Connectors (for BS 5503) 

WC Connectors continued 



P/E Connector – 90° 





110 4S771 BGEWN 109 173 

SW/S Connector – 90° 





110 4S772 BGEWN 109 134 

P/E Access Connector – 90° 


z Screwed access cover 






110 4S761 BGEWN 109 80 173 

SW/S Access Connector – 90° 


z Screwed access cover 

z Spares available as follows: Access Cap 4S904, Access Cap 

Gasket 4S992 (page 82) 




110 4S762 BGEWN 109 80 134 

NOTE: Manifold Branches and WC Connectors are fitted with a gasket for direct connection to the outlets of WC’s manufactured to BS 5503 



WC Manifold Branches ■ WC Connectors (for BS 5503) 

43

44 

WC Connectors (gasket to be fitted) 

WC Gasket 


01249 766611 


01249 766655 


WC Connectors (for BS 1213) ■ WC Gasket 

P/E Connector – Straight 


z For direct connection to WC’s to BS 1213 when fitted with the 

appropriate Gasket 4S120 or 4S121 (see below) 




110 4S731 BGEWN 104 

SW/S Connector – Straight 







110 4S730 BGEWN 75 

P/E Connector – 87 1 /2 ° 







110 4S746 BGEWN 106 191 

SW/S Connector – 87 1 /2 ° 







110 4S745 BGEWN 106 77 

WC Gasket 

z For use with Connectors 4S730, 4S731, 4S745 and 4S746 

(see above) 

z Connects to WC spigots as follows: 

4S121 suits 4” to 4 1 /4” spigots 

4S120 suits 4 1 /4” to 4 1 /2” spigots 

MATERIAL: Synthetic Rubber 

NOM. PART 

SIZE NO. COLOUR WC SPIGOT 

110 4S120 BGEWN 4" to 41 /4" 

110 4S121 BGEWN 41 /4" to 41 /2" 


TECHNICAL FAX 

01249 766653 

EMAIL 

info@wavin.co.uk


WC Connectors (Ancillaries) ■ Easy-Fit Pan Connectors 

WC Connectors (ancillaries) 





z For use with WC Connectors (page 42-44) where connection 

to SVP is visible 



SIZE NO. COLOUR LENGTH 

110 4S600 BGEWN 600 

S/S Long-Tail Bend – 87 1 /2 ° 

z For use with WC Connectors (page 42-44) 

z Do NOT use as a WC connector 




110 4S790 BGEWN 195 134 

Easy-Fit Connector – Straight 

z For use where the WC outlet is horizontal to the 

branch connection 

z Fitted with a gasket for direct connection to the outlets 

of WC’s manufactured to BS 5503 

z Spigot end of 3 1 /2" Connector WC003 incorporates gasket for 

direct insertion into plain end of 3 1 /2" cast-iron pipe to BS 416 

z Spigot end of 4" Connector WC004 incorporates gasket 

for direct insertion into plain end of 4" pipe e.g. cast-iron, 

plastic or clay 




31 /2" WC003 BGEWN 116 52 

4" WC004 BGEWN 116 52 

Easy-Fit Offset Connector 

z For use where the WC outlet is not directly in line with the 

branch connection. Correct alignment obtained by turning the 

connector 

z Fitted with a gasket for direct connection to the outlets 

of WC’s manufactured to BS 5503 



z Spigot end of 4" Connector WC204 incorporates gasket 

for direct insertion into plain end of 4" pipe e.g. cast-iron, 





31 /2" WC203 BGEWN 116 52 22 

4" WC204 BGEWN 116 52 16 

Easy-Fit Pan Connectors continued overleaf 


WC Connectors (for BS 1213) ■ Easy-Fit Pan Connectors 

45

46 

Easy-Fit Pan Connectors continued 


01249 766611 


01249 766655 


Easy-Fit Connector – 14° 

TECHNICAL FAX 

01249 766653 


z Converts a horizontal WC outlet to an angle of 14° (76°) 



z Spigot end of 4" Connector WC144 incorporates gasket for 

direct insertion into plain end of 4" pipe e.g. cast-iron, 





31 /2" WC143 BGEWN 73 52 67 

4" WC144 BGEWN 73 52 67 

Easy-Fit Connector – 90° 

z Converts a horizontal WC outlet to a left or right-hand 

‘S’ or ‘P’ trap 

z Can be cut to required length 

z Spigot end incorporates gasket for direct insertion into plain 

end of 4" pipe e.g. cast-iron, plastic or clay 




4" WC904 BGEWN 107 52 236 

Straight Extension Piece 


z Makes up the distance between any Easy-Fit Connector and soil 

or drain pipe connection 

z Spigot end incorporates gasket for direct insertion into plain 

end of 4" pipe e.g. cast-iron, plastic or clay 




4" WC404 BGEWN 255 52 

NOTE: Easy-Fit Pan Connectors are fitted with a gasket for direct connection to the outlets of WC’s manufactured to BS 5503 


EMAIL 

info@wavin.co.uk

PVC-U SOIL SYSTEMS: Vents 

Terminal Fittings 

Terminal Fittings 



Balloon Grating 




82 3S302 BGEWN 94 

110 4S302 BGEWN 90 

160 6S302 BGEWN 160 

Weathering Collar 

z Used to maintain a watertight seal between pipe and traditional 

lead or aluminium flashing 

z To be solvent welded to pipe using Solvent Cement Filler 

4S394 (page 81) 




82 3S300 BGEWN 62 

110 4S300 BGEWN 86 

160 6S300 BGEW 58 

Breather Vent 

z Used on mastic-asphalt or built-up roof finishes to allow 

moisture-laden vapour to escape from the screed or roof deck 

z Prevents distortion, blistering and deterioration of the finish 

z Do NOT use for roof-void ventilation 

MATERIAL: Propylene co-polymer 



110 4S700 BGEWN 127 102 150 204 

SW/S Vent Cowl 

z Provides an alternative weather-proof termination for soil and 

vent pipe, or outlet for a mechanical-ventilation system 

z Can be used in a vertical or horizontal position 




110 4S310 BGEWN 172 40 100 

SW/S Extract Valve 

z Fitted with solvent weld socket 

z Adjustable valve for use with a mechanical extract or ventilation 

system to control the air flow rate 

MATERIAL: PVC-U and Polypropylene 



110 4S709 BGEWN 178 25-42, closed to fully open 


(Also WC Connectors: Easy-Fit Pan Connectors) 47

48 

Air Admittance Valves 

Pipe Flashings 

Fire Stop Seal 


01249 766611 


01249 766655 


Air Admittance Valves ■ Pipe Flashings 

OsmaVent 40 Air Admittance Valve 

z For direct connection to a 32mm [1 1 /4"] or 40mm [1 1 /2"] 

waste spigot 

z Allows air into discharge pipe systems without allowing 

foul air to escape 

z See Design and Installation Guide, BBA and 

BS EN 12056:2000 for ventilation requirements 


MATERIAL: ABS 



40 4S303 BGEWN 66 40 71 


z For direct connection to a 110mm spigot on BS EN 1329 soil pipe 

z For 82mm pipe, the rubber seal is removed, a short length of 

pipe welded to the socket, and the pipe fitted into a Socket 

3S124 (page 17) 



z See Design and Installation Guide, BBA and 



MATERIAL: ABS 



110 4S304 BGEWN 130 85 135 

Varipitch Pipe Flashing for Flat Roofs 

z For use with 82mm and 110mm soil pipe to BS EN 1329 which 

penetrates a flat roof 

MATERIAL: Aluminium base, EPDM Rubber cone 



– 4S281 BGEWN 400x400 85 

Varipitch Pipe Flashing for Pitched Roofs 

z For use with 82mm and 110mm soil pipe to BS 1329 which 

penetrates a pitched roof 

MATERIAL: Aluminium base, EPDM Rubber cone 


SIZE NO. A B 

– 4S283 BGEWN 450x450 85 

– 4S285 BGEWN 600x600 85 


z For use with 50mm, 82mm, 110mm and 160mm pipes which 

penetrate a compartment wall or floor 

z See Design and Installation Guide and Building Regulations 

1992, Approved Document B for fire stopping requirements 

MATERIAL: Metal, containing an intumescent compound 



50 2S001 BGEWN 60 

82 3S001 BGEWN 60 

110 4S001 BGEWN 60 

160 6S001 BGEWN 100 


TECHNICAL FAX 

01249 766653 

EMAIL 

info@wavin.co.uk

ABS SOLVENT WELD WASTE SYSTEM: OsmaWeld 

Pipe ■ Bracket ■ Pipe Clip ■ Sockets 

Pipe 

Bracket 

Pipe Clip 

Sockets 




MATERIAL: ABS 



32 4Z073 BGEWN 3 

32 4Z074 BGEWN 4 

40 5Z073 BGEWN 3 

40 5Z074 BGEWN 4 

50 2Z073 BGEWN 3 

50 2Z074 BGEWN 4 

Pipe Bracket 


MATERIAL: ABS 



32 4Z081 BGEWN 31 67 85 

40 5Z081 BGEWN 34 73 92 

50 2Z081 BGEWN 58 82 102 

Pipe Clip 


MATERIAL: ABS 



32 4Z082 BGEWN 17 31 

40 5Z082 BGEWN 19 34 

Double Socket 

z For connecting lengths of ABS pipe 

z Use Universal Connectors 4C102 and 5C102 (page 57) 

for connecting to other materials 

MATERIAL: ABS 



32 4Z104 BGEWN 44 3 

40 5Z104 BGEWN 51 3 

50 2Z104 BGEWN 66 3 

Expansion Socket 

z For creating an expansion joint where provision for thermal 

movement is required. See Design and Installation Guide 

for details 

z Solvent weld socket and push-fit ring-seal socket 

z Push-fit socket connects to 32mm [1 1 /4"], 40mm [1 1 /2"] 

or 50mm [2"] pipe to BS EN 1451-1/BS 5254 and BS 5255 

z Also connects to copper pipe to BS 659 and BS 2871 

MATERIAL: ABS 



32 4Z124 BGEWN 67 3 

40 5Z124 BGEWN 72 3 

50 2Z124 BGEWN 85 3 

ABS SOLVENT WELD WASTE SYSTEM 

(Also Vents: AAV’s ■ Flashings ■ Fire Stop Seal) 49

50 

Bends 


01249 766611 



01249 766655 

Knuckle Bend – 90° 

MATERIAL: ABS 



32 4Z160 BGEWN 43 

40 5Z160 BGEWN 50 

Bend – 87 1 /2° 

MATERIAL: ABS 



32 4Z161 BGEWN 55 55 

40 5Z161 BGEWN 65 65 

50 2Z161 BGEWN 98 91 

Bend – 45° 

MATERIAL: ABS 



32 4Z163 BGEWN 34 

40 5Z163 BGEWN 38 

50 2Z163 BGEWN 47 

Long-Tail Bend – 90° 

MATERIAL: ABS 



32 4Z260 BGEWN 42 86 

40 5Z260 BGEWN 49 92 

Long-Tail Bend – 87 1 /2° 


z Push-fit socket connects to 50mm [2"] pipe to 

BS EN 1451-1/BS 5254 and BS 5255 


z See Design and Installation Guide regarding 


MATERIAL: ABS 



50 2Z359 BGEWN 72 152 


TECHNICAL FAX 

01249 766653 

Bends 

EMAIL 

info@wavin.co.uk


Tees ■ Cross ■ Plug 

Tees 

Cross 

Plug 



Tee – 87 1 /2° 

MATERIAL: ABS 



32 4Z190 BGEWN 49 40 47 

40 5Z190 BGEWN 59 46 55 

50 2Z190 BGEWN 98 54 91 

Tee – 45° 

MATERIAL: ABS 



32 4Z210 BGEWN 58 99 

40 5Z210 BGEWN 64 113 

50 2Z210 BGEWN 75 144 

Cross – 87 1 /2 ° 

MATERIAL: ABS 



40 5Z230 BGEWN 65 46 62 

50 2Z230 BGEWN 97 54 91 

NOTE: Should not be used in a horizontal position 




z See Design and Installation Guide and BS EN 12056:2000 

regarding provision of access 

MATERIAL: ABS 



32 4Z292 BGEWN 41 25 

40 5Z292 BGEWN 48 28 

50 2Z292 BGEWN 60 32 


Bends ■ Tees ■ Cross ■ Plug 51

52 

Connectors and Adaptors 


01249 766611 



01249 766655 

Straight Tank Connector 

Universal Connector 

z Two push-fit ring-seal sockets 

Cap and Liner 

Male Iron Connector 


TECHNICAL FAX 

01249 766653 

Connectors ■ Adaptors 

z Flanged, threaded connector, and push-fit ring-seal socket 

z Push-fit socket connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] pipe 

to BS EN 1451-1/BS 5254 and BS 5255 


z Includes fibre washers 




32 4Z185 BGEWN 53 

40 5Z185 BGEWN 56 

z Connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] pipe to 






32 4C102 BGEWN 89 3 

40 5C102 BGEWN 95 3 

z Threaded nut connector, and solvent weld socket 

z Nut connects to 1 1 /4" or 1 1 /2" BSPT threaded waste outlets 

z Solvent weld socket connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] 

ABS or MUPVC solvent weld waste pipe to BS 5255 




32 4Z364 BGEWN 63 

40 5Z364 BGEWN 63 

z Threaded spigot connector, and push-fit ring-seal socket 

z Spigot connects to 1 1 /4", 1 1 /2" or 2" BSPT iron sockets 

z Push-fit socket connects to 32mm [1 1 /4"], 40mm [1 1 /2"], or 

50mm [2"] plastic waste pipe to BS EN 1451-1/BS 5254 

or BS 5255 





32 4Z126 BGEWN 53 

40 5Z126 BGEWN 56 

50 2Z126 BGEWN 45 

EMAIL 

info@wavin.co.uk



Connectors and Adaptors continued 



Female Iron Connector 

z Threaded socket connector, and solvent weld socket 

z Threaded socket connects to 11 /4", 11 /2" or 2" BSPT male 

iron spigot 

z Solvent weld socket connects to 32mm [11 /4"], 40mm [11 /2"], 

or 50mm [2"] plastic waste pipe to BS 5255 

MATERIAL: ABS 



32 4Z127 BGEWN 50 

40 5Z127 BGEWN 53 

50 2Z127 BGEWN 60 


z Threaded spigot connector, and solvent weld socket 

z Threaded spigot connects to 11 /4", 11 /2" or 2" BSPT female 

iron sockets 

z Solvent weld socket connects to 32mm [11 /4"], 40mm [11 /2"], 

or 50mm [2"] plastic waste pipe to BS 5255 

MATERIAL: ABS 



32 4Z128 BGEWN 44 

40 5Z128 BGEWN 47 

50 2Z128 BGEWN 53 

Connector to BS 659 Copper Spigot 

z Compression joint, and push-fit ring-seal socket 

z Compression joint connects to 11 /4" or 11 /2" copper spigots 

to BS 659 

z Push-fit socket connects to 32mm [11 /4"] or 40mm [11 /2"] plastic 

waste pipe to BS EN 1451-1/BS 5254 or BS 5255 

z Also connects to copper pipe to BS 659 or BS 2871 




32 4Z184 BGEWN 53 

40 5Z184 BGEWN 56 

Connector to BS 659 Copper 


z Captive nut and ring-seal, and push-fit ring-seal socket 

z Nut connects to 11 /4 or 11 /2" copper compression fittings 

to BS 659 







32 4Z365 BGEWN 65 

40 5Z365 BGEWN 68 


Connectors ■ Adaptors 53

54 

Reducers 


01249 766611 



01249 766655 

Level Invert Reducer 

z One P/E and one solvent weld socket 


TECHNICAL FAX 

01249 766653 

Reducers 

z Allows connection of a 32mm [11 /4"] waste pipe to either 40mm 

[11 /2"] or 50mm [2"] S/W sockets 

z Also allows a 40mm [11 /2"] pipe to be connected to a 50mm 

[2"] S/W socket 

MATERIAL: ABS 



40x32 5Z085 BGEWN 46 2 

50x32 2Z088 BGEWN 59 4 

50x40 2Z086 BGEWN 62 4 

Concentric Reducer 

z Fits inside a 40mm [1 1 /2"] solvent weld socket to BS 5255 

z Allows connection of a 32mm [1 1 /4"] waste pipe to BS 5255 

MATERIAL: ABS 



40X32 5Z455 BGEWN 26 

EMAIL 

info@wavin.co.uk

MUPVC SOLVENT WELD WASTE SYSTEM 

Pipe ■ Bracket ■ Socket 

Pipe 

Bracket 

Sockets 




MATERIAL: MUPVC 



32 4M073 BGEWN 3 

40 5M073 BGEWN 3 

50 2M073 BGEWN 3 

Pipe Bracket 





32 4M081 BGEWN 28 58 74 

40 5M081 BGEWN 31 63 79 

50 2M081 BGEWN 38 75 91 

Double Socket 

z For connecting lengths of MUPVC pipe 

z Use Universal Connectors 4C102 and 5C102 (page 57) 





32 4M104 BGEWN 52 2 

40 5M104 BGEWN 58 2 

50 2M104 BGEWN 68 2 

Expansion Socket 

z For creating an expansion joint where provision for thermal 

movement is required. See Design and Installation Guide 

for details 

z Solvent weld socket and push-fit ring-seal socket 

z Push-fit socket connects to 32mm [1 1 /4"], 40mm [1 1 /2"] or 

50mm [2"] pipe to BS EN 1451-1/BS 5254 and BS 5255 





32 4M124 BGEWN 64 3 

40 5M124 BGEWN 65 3 

50 2M124 BGEWN 72 3 


Pipe ■ Components (Also OsmaWeld Waste) 55

56 

Bends 


01249 766611 


01249 766655 






32 4M160 BGEWN 49 

40 5M160 BGEWN 56 

50 2M160 BGEWN 67 

Bend – 87 1 /2° 




32 4M161 BGEWN 65 

40 5M161 BGEWN 68 

50 2M161 BGEWN 95 

Bend – 45° 




32 4M163 BGEWN 41 

40 5M163 BGEWN 47 

50 2M163 BGEWN 59 

Spigot Bend – 90° 




32 4M260 BGEWN 49 53 

40 5M260 BGEWN 56 64 

50 2M260 BGEWN 68 82 


TECHNICAL FAX 

01249 766653 

Bends 

EMAIL 

info@wavin.co.uk


Tees ■ Plug ■ Connectors ■ Adaptors 

Tees 

Plug 




Tee – 87 1 /2° 




32 4M190 BGEWN 61 39 64 

40 5M190 BGEWN 71 43 71 

50 2M190 BGEWN 80 56 80 

Tee – 45° 




32 4M210 BGEWN 52 108 

40 5M210 BGEWN 60 123 

50 2M210 BGEWN 76 154 









32 4M292 BGEWN 48 25 

40 5M292 BGEWN 54 28 

50 2M292 BGEWN 63 33 










32 4Z185 BGEWN 53 

40 5Z185 BGEWN 56 



z Connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] pipe 






32 4C102 BGEWN 89 3 

40 5C102 BGEWN 95 3 

Connectors and Adaptors continued overleaf 


Bends ■ Tees ■ Plug ■ Connectors ■ Adaptors 57

58 



01249 766611 


01249 766655 




TECHNICAL FAX 

01249 766653 


z Threaded nut connector, and solvent weld socket 

z Nut connects to 1 1 /4" or 1 1 /2" BSPT threaded waste outlets 

z Solvent weld socket connects to 32mm [1 1 /2"] or 40mm [1 1 /2"] 

ABS or MUPVC Solvent Weld Waste pipe to BS 5255 




32 4Z364 BGEWN 63 

40 5Z364 BGEWN 63 



z Spigot connects to 1 1 /4", 1 1 /2" or 2" BSPT iron sockets 

z Push-fit socket connects to 32mm [1 1 /4"], 40mm [1 1 /2"], or 

50mm [2"] plastic waste pipe to BS EN 1451-1/BS 5254 

or BS 5255 





32 4Z126 BGEWN 53 

40 5Z126 BGEWN 56 

50 2Z126 BGEWN 45 

Female Iron Connector 

z Threaded socket connector, and solvent weld socket 

z Threaded socket connects to 11 /4", 11 /2" or 2" BSPT 

male iron spigot 

z Solvent weld socket connects to 32mm [11 /4"], 40mm [11 /2"], or 

50mm [2"] plastic waste pipe to BS 5255 

MATERIAL: ABS 



32 4Z127 BGEWN 50 

40 5Z127 BGEWN 53 

50 2Z127 BGEWN 60 


z Threaded spigot connector, and solvent weld socket 

z Threaded spigot connects to 11 /4", 11 /2" or 2" BSPT female 

iron sockets 

z Solvent weld socket connects to 32mm [11 /4"], 40mm [11 /2"], or 

50mm [2"] plastic waste pipe to BS 5255 

MATERIAL: ABS 



32 4Z128 BGEWN 44 

40 5Z128 BGEWN 47 

50 2Z128 BGEWN 53 

EMAIL 

info@wavin.co.uk


Connectors ■ Adaptors ■ Reducers 

Connectors and Adaptors continued 

Reducers 





z Compression joint connects to 11 /4" or 11 /2" copper spigots 

to BS 659 







32 4Z184 BGEWN 53 

40 5Z184 BGEWN 56 




z Nut connects to 11 /4" or 11 /2" copper compression fittings 

to BS 659 

z Push-fit socket connects to 32mm [11 /4"] or 40mm [11 /2"] 

plastic waste pipe to BS EN 1451-1/BS 5254 or BS 5255 





32 4Z365 BGEWN 65 

40 5Z365 BGEWN 68 


z Fits inside a 40mm [1 1 /2"] solvent weld socket to BS 5255 

z Allows connection of a 32mm [11 /4"] waste pipe to either 

40mm [11 /2"] or 50mm [2"] pipe 

z Also allows a 40mm [11 /2"] pipe to be connected to a 

50mm [2"] pipe 




40x32 5M455 BGEWN 33 

50x32 2M458 BGEWN 33 

50x40 2M456 BGEWN 33 


Connectors ■ Adaptors ■ Reducers 59

60 

Pipe 

Bracket 

Socket 


01249 766611 

PP PUSH-FIT WASTE SYSTEM (BS EN 1451-1) 


01249 766655 





32 4W073 BGEWN 3 

40 5W073 BGEWN 3 

50 2W073 BGEWN 3 

Pipe Bracket 





32 4W081 BGEWN 33 53 69 

40 5W081 BGEWN 36 64 80 

50 2W081 BGEWN 43 81 97 

Double Socket 

z For connecting lengths of polypropylene pipe 

z Universal Connectors 4W102 and 5W102 should be used 





32 4W105 BGEWN 68 2 

40 5W105 BGEWN 68 2 

50 2W105 BGEWN 71 2 

NOTE: This system was formerly known as BS 5245. Dimensionally the system has not changed and is now approved 

to the latest European standard BS EN 1451-1:2000 


TECHNICAL FAX 

01249 766653 

Pipe ■ Bracket ■ Sockets 

EMAIL 

info@wavin.co.uk


Bends ■ Tee 

Bends 

Tee 







32 4W160 BGEWN 32 

40 5W160 BGEWN 56 

50 2W160 BGEWN 63 

Bend – 87 1 /2 ° 




32 4W161 BGEWN 71 

40 5W161 BGEWN 75 

50 2W161 BGEWN 95 

Bend – 45° 




32 4W163 BGEWN 50 

40 5W163 BGEWN 53 

50 2W163 BGEWN 58 





32 4W260 BGEWN 61 60 

40 5W260 BGEWN 60 58 

50 2W260 BGEWN 68 74 

Tee – 87 1 /2° 




32 4W190 BGEWN 72 43 74 

40 5W190 BGEWN 78 48 78 

50 2W190 BGEWN 90 57 90 


Pipe ■ Bracket ■ Socket ■ Bends ■ Tee 61

62 

Plug 

Connector 

Reducers 


01249 766611 



01249 766655 

Access Plug 

Reducer 


TECHNICAL FAX 

01249 766653 

Plug ■ Connector ■ Reducers 

z Fits into a push-fit ring-seal socket to provide an access point 






32 4W292 BGEWN 49 27 

40 5W292 BGEWN 56 27 

50 2W292 BGEWN 69 35 



z Connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] pipe to 






32 4W102 BGEWN 89 3 

40 5W102 BGEWN 95 3 

z Spigot connects to 40mm [11 /2"] push-fit ring-seal socket 

to BS EN 1451-1 

z Socket connects to 32mm [11 /4"] waste pipe 

to BS EN 1451-1 




40x32 5W084 BGEWN 44 

Level Invert Reducer 

z Spigot connects to 50mm [2"] push-fit ring-seal socket 

to BS EN 1451-1 

z Socket connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] waste pipe 

to BS EN 1451-1 




50x32 2W088 BGEWN 71 

50x40 2W086 BGEWN 71 

EMAIL 

info@wavin.co.uk

PP PUSH-FIT WASTE SYSTEM: ClearBore (BS 5255) 

Pipe ■ Bracket ■ Pipe Clip ■ Socket ■ Bends 

Pipe 

Bracket 

Pipe Clip 

Socket 

Bends 







32 4C072 BGEWN 2 

32 4C074 BGEWN 4 

40 5C072 BGEWN 2 

40 5C074 BGEWN 4 

50 2C074 BGEWN 4 

Pipe Bracket 


MATERIAL: ABS 



32 4C081 BGEWN 31 67 85 

40 5C081 BGEWN 34 73 92 

50 2C081 BGEWN 58 82 102 

Pipe Clip 





32 4C082 BGEWN 17 31 

40 5C082 BGEWN 19 34 

Double Socket 

z Two push-fit sockets 

z Universal Connectors 4C102 and 5C102 (page 65) should be 

used for connecting to other materials 




32 4C105 BGEWN 73 2 

40 5C105 BGEWN 73 2 

50 2C105 BGEWN 105 3 





32 4C160 BGEWN 58 

40 5C160 BGEWN 62 

Bend – 87 1 /2° 




32 4C161 BGEWN 79 

40 5C161 BGEWN 85 

50 2C161 BGEWN 117 

Bends continued overleaf 

PP PUSH-FIT WASTE SYSTEM: ClearBore 

(Also PP Push-Fit Waste system: Components) 63

64 


Tee 

Plug 

Connectors 


01249 766611 



01249 766655 

Bend – 45° 



TECHNICAL FAX 

01249 766653 

Bends ■ Tee ■ Plug ■ Connectors 



32 4C163 BGEWN 48 

40 5C163 BGEWN 50 

50 2C163 BGEWN 70 





32 4C263 BGEWN 48 45 

40 5C263 BGEWN 50 47 

Tee – 87 1 /2° 




32 4C190 BGEWN 65 55 63 

40 5C190 BGEWN 70 57 68 

50 2C190 BGEWN 117 80 108 


z Fits into a push-fit BS 5255 socket to provide an access point 



for ventilation requirements 




32 4C292 BGEWN 41 25 

40 5C292 BGEWN 48 28 

50 2C292 BGEWN 60 32 










32 4C185 BGEWN 53 

40 5C185 BGEWN 56 

EMAIL 

info@wavin.co.uk

PP PUSH-FIT WASTE SYSTEM: ClearBore (BS 5255) 

Connectors 



A 



z Connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] pipe 






32 4C102 BGEWN 89 3 

40 5C102 BGEWN 95 3 

Universal Compression Connector 

z Connects to 32mm [1 1 /4"], 40mm [1 1 /2"] or 50mm [2"] pipe 






32 4C103 BGEWN 80 

40 5C103 BGEWN 80 

50 2C103 BGEWN 108 



z Spigot connects to 1 1 /4", 1 1 /2" or 2" BSPT female iron sockets 

z Push-fit socket connects to 32mm [1 1 /4"], 40mm [1 1 /2"], or 50mm 

[2"] plastic waste pipe to BS EN 1451-1/BS 525 or BS 5255 





32 4C126 BGEWN 53 

40 5C126 BGEWN 56 

50 2C126 BGEWN 45 



z Compression joint connects to 1 1 /4" or 1 1 /2" copper spigots to BS 659 

z Push-fit socket connects to 32mm [1 1 /4"] or 40mm [1 1 /2"] plastic 






32 4Z184 BGEWN 53 

40 5Z184 BGEWN 56 




z Nut connects to 11 /4" or 11 /2" copper compression fittings to BS 659 







32 4C365 BGEWN 65 

40 5C365 BGEWN 68 


Bends ■ Tee ■ Plug ■ Connectors 

www.wavin.co.uk 65

66 

Reducers 


01249 766611 

A 


01249 766655 


S/S Reducer 

z Spigot connects to 40mm [11 /2"] push-fit ring-seal socket 

to BS 5255 

z Socket connects to 32mm [11 /2"] waste pipe to BS 5255 




40x32 5C084 BGEWN 48 

Reducer to 19mm Overflow Pipe 

z Fits inside a 32mm [1 1 /4"] solvent weld or push-fit ring-seal 

socket to BS EN 1451-1/BS 5254 or BS 5255 

z Allows connection of a 19mm overflow pipe 

MATERIAL: Synthetic rubber 



32x19 4Z343 28 


z Fits inside a 40mm [11 /2"] solvent weld or push-fit ring-seal 

socket to BS EN 1451-1/BS 5254 or BS 5255 

z Allows connection of a 32mm [11 /2"] waste pipe to 

BS EN 1451-1/BS 5254 or BS 5255 

z Also allows connection of a copper waste pipe to BS 659 

or BS 2871 




40x32 5Z344 BGEWN 38 


Universal Compression Reducer 


TECHNICAL FAX 

01249 766653 

Reducers 

z Fits inside a 50mm [2"] solvent weld or push-fit ring-seal socket 

to BS EN 1451-1/BS 5254 or BS 5255 

z Allows connection of a 32mm [1 1 /2"] or 40mm [1 1 /2"] waste pipe 

to BS EN 1451-1/BS 5254 or BS 5255 

z Also allows connection of a copper waste pipe to BS 659 

or BS 2871 




50x32 2Z347 BGEWN 44 

50x40 2Z349 44 

z Socket connects to 32mm [1 1 /2"] or 40mm [1 1 /2"] waste pipe 

to BS EN 1451-1/BS 5254 or BS 5255 

z Also connects to copper waste pipe to BS 659 or BS 2871 

MATERIAL: PP 


SIZE NO. COCOLOUR A 

40 5C345 BGEWN 80 

EMAIL 

info@wavin.co.uk

WASTE SYSTEM: Vents 

Air Admittance Valve ■ Fire Stop Seal 

Air Admittance Valve 





z For direct connection to a 32mm [1 1 /4"] or 40mm [1 1 /2"] 

waste pipe spigot 



z See Design and Installation Guide BBA and 



MATERIAL: ABS 



40 4S303 BGEWN 66 40 71 


z For use with 50mm, 82mm, 110mm and 160mm pipes which 

penetrate a compartment wall or floor 

z See Design and Installation Guide and Building Regulations 

1992, Approved Document B for fire stopping requirements 

MATERIAL: Metal, containing an intumescent compound 



50 2S001 BGEWN 60 

82 3S001 BGEWN 60 

110 4S001 BGEWN 60 

160 6S001 BGEWN 100 

WASTE SYSTEMS: Vents 

(Also PP Push-Fit Waste system: ClearBore: Components) 67

68 

90° All-Fit Conversion Bend 

Bottle Traps 


01249 766611 


01249 766655 

PP WASTE SYSTEM: V-Joint Traps 

90° All-Fit Conversion Bend 

z Converts a ‘P’ Trap Outlet to an ‘S’ Trap Outlet 

Bottle Trap – 38mm seal 

Bottle Trap – 75mm seal 


TECHNICAL FAX 

01249 766653 

Bend ■ Bottle traps 

z Connects to 32mm [1 1 /4”] or 40mm [1 1 /2"] pipe to 

BS EN 1451-1/BS 5254 and BS 5255, or to copper pipe 

to BS 659 and BS 2871 




32 4A830 BGEWN 69 67 

40 5A830 BGEWN 71 71 

z For use with appliances with trailing waste discharge, installed 

on ground floors and discharging to external gullies 

(refer to BS EN 12056:2000) 




32 4V809 BGEWN 120 60 78 

40 5V809 BGEWN 130 68 93 



32 4V812 BGEWN 172 72 47 66 

40 5V812 BGEWN 175 76 50 74 

Anti-Syphon Bottle Trap – 75mm seal 




32 4V814 BGEW 172 72 48 62 

40 5V814 BGEW 190 80 50 72 

Re-Sealing Bottle Trap – 75mm seal 

z Designed to prevent loss of seal where either self-siphonage or 

induced siphonage is likely 

z In some instances, can be used as an alternative to branch 

ventilation pipes (refer to BS EN 12056:2000) 




32 4V816 BGEWN 178 67 50 75 

40 5V816 BGEWN 185 73 50 82 


EMAIL 

info@wavin.co.uk


Bottle traps ■ Tubular Traps 

Bottle Traps continued 

Tubular Traps 



A 

D 

B 

C 

Adjustable Bottle Trap – 75mm seal 



SIZE NO. COLOUR A (min) A (max) B C D 

32 4V808 BGEW 185 290 75 62 62 

40 5V808 BGEW 180 270 77 65 72 

Tubular ‘P’ Trap - 75mm seal 




32 4V801 BGEW 145 120 57 57 

40 5V801 BGEW 150 138 60 63 

50 2V801 BGEW 180 165 85 80 

Adjustable Tubular ‘P’ Trap – 75mm seal 

z Incorporates adjustable inlet allowing the height of the trap 

to be varied 



SIZE NO. COLOUR A (min) A (max) B C 

32 4V807 BGEWN 140 230 57 120 

40 5V807 BGEWN 155 225 57 138 

Running ‘P’ Trap – 75mm seal 

z Both inlet and outlet incorporate ‘V’ joint connections 




32 4V805 BGEWN 125 57 125 131 

40 5V805 BGEWN 140 62 140 146 

50 2V805 BGEWN 160 76 160 170 

Tubular ‘S’ Trap – 75mm seal 




32 4V803 BGEWN 145 57 57 

40 5V803 BGEWN 150 63 63 


Bend ■ Bottle Traps ■ Tubular Traps 

Tubular traps continued overleaf 

69

70 

Tubular Traps continued 

Bath Traps 


01249 766611 


01249 766655 


Variform Trap – 75mm seal 

Bath Trap – 38mm seal 

TECHNICAL FAX 

01249 766653 

Tubular Traps ■ Bath Traps 

z Particularly useful for replacement, maintenance and 

improvement work where connection between two fixed points 

is required 




32 4V804 BGEWN 146-224 155-211 56-134 

40 5V804 BGEWN 152-234 164-220 60-142 

Straight Through Trap – 75mm seal 

z Incorporates a cleaning eye 

z Particularly useful for wash basin pedestals where the waste 

pipe can be concealed 




32 4V825 BGEWN 240 44 88 

z For use with appliances trailing waste discharge and installed on 

ground floors discharging to an external gully 

z Refer also to BS EN 12056:2000 




40 5V802 BGEWN 85 170 95 

Bath Trap – Shallow seal 




32 4V806 BGEWN 65 130 60 

40 5V806 BGEWN 110 150 66 

Bath Trap – 75mm seal 

z Incorporates screwed access cover for maintenance 




40 5V846 BGEWN 110 195 130 


EMAIL 

info@wavin.co.uk


Bath Traps ■ Shower Traps 

Bath Traps continued 

A 

Shower Traps 



C 

B 

A 

A 

D 

B 

B 

B 

A 

Bath Trap and Overflow – 75mm seal 

z Incorporates: 

- flexible overflow connection 

- chromium-plated rose 

- chain for the waste plug 




40 5V848 BGEWN 110 195 130 

Anti-Syphon Bath Trap – 75mm seal 

z 40mm Anti-Syphon Bath Trap with 50mm water seal 




40 5V842 BGEWN 85 255 

Bath Trap with Extended Body – 60mm seal 


- flexible overflow connection 

- chromium-plated rose 

- chain for the waste plug 



SIZE NO. COLOUR A B C D (min) D (max) 

40 5V860 BGEWN 85 210 150 300 500 

Shower Trap – 19mm seal 

z Includes a dip tube, removable from top 

z Allows for easy cleaning 




40 5V823 BGEWN 90 42 

Shower Trap – 50mm seal 

z Includes a dip tube, removable from top 

z Allows for easy cleaning 




40 5V824 BGEWN 118 42 


Tubular Traps ■ Bath Traps ■ Shower Traps 

71

72 

Shower Gullies 

WasteFlow Units 


01249 766611 

A 

A 

A 

B 

C 

A 

B 

B 

C 

B 

C 


01249 766655 


TECHNICAL FAX 

01249 766653 

Shower Gullies ■ WasteFlow Units 

Shower Gully for Tiled Floor 

z Allows flush installation in tiled finish 

MATERIAL: ABS 



50 2V500 BGEWN 130 200 93 

Stainless Steel Adaptor – for 2V500 (above) 

MATERIAL: Inlet grill – stainless-steel; Top cover – ABS 



50 2V501 BGEWN 156 113 

Shower Gully for Sheet Floor 

z Allows flush installation in sheet finish 

MATERIAL: ABS 



50 2V510 BGEWN 130 200 120 

Shower Gully for Sheet Floor 

z Allows flush installation in sheet finish 

MATERIAL: Inlet grill – stainless-steel; Top cover – ABS 



50 2V511 BGEWN 175 200 120 

Bath Trap and WasteFlow Unit – 75mm seal 

z Combined means of disposal of overflow discharges from both 

cold water storage and WC cisterns 

z Eliminates need for external overflow pipes 


– flexible overflow/ WasteFlow unit 

– chromium-plated rose 

– chain for the wasteplug 

z Incorporates 11 /2" BSPT inlet for Overflow Connectors 5V835, 

5V836 or 5V837 (page 73) 




40 5V859 BGEWN 27 111 90 85 


EMAIL 

info@wavin.co.uk


WasteFlow Units ■ Washing Machine Traps 

WasteFlow Units continued 

Washing Machine Traps 



WasteFlow Tee – 2-way with 1 plug 

z When fitted to Bath Trap 5V859 (page 72), allows connection 

of up to two 19mm [ 3 /4"] Push-Fit Overflow pipes 

z Will also accept Solvent Weld Overflow pipe when used with 

fitting 1O158 or 1O159 (page 77) with one connector 

blanked off 




40 5V836 BGEWN 55 95 

WasteFlow Tee – 4-way with 3 plugs 

z When fitted to Bath Trap 5V859 (page 72), allows connection 

of up to four 19mm [ 3 /4"] Push-Fit Overflow pipes 

z Will also accept Solvent Weld Overflow pipe when used with 

fitting 1O158 or 1O159 (see page 77) with three connectors 

blanked off 




40 5V837 BGEWN 55 95 

Washing Machine Half Trap – 75mm seal 

z For direct connection to 3 /4" hose from washing machines 

or dishwashers 

z Hose adaptor can also be cut back to provide 3 /4" or 1" BSPT 

male thread 




40 5V864 BGEWN 185 140 60 63 


Shower Gullies ■ WasteFlow Units ■ Washing Machine Traps 73

74 

Washing Machine Traps continued 

A 


01249 766611 

A 

B 

B 

C 


01249 766655 


TECHNICAL FAX 

01249 766653 

Washing Machine Traps 

Washing Machine Full Trap – 75mm seal 

z For direct connection to 3 /4" hose from washing machines 





40 5V868 BGEWN 212 60 63 130 

Washing Machine Trap with Standpipe – 

75mm seal 

z Machine hose hooks into top of standpipe to provide 

an air break 

z Supplied with two pipe brackets 




40 5V870 BGEWN 700 60 63 140 

Washing Machine Tee Piece 

z Fits between the sink and an existing trap 

z Allows direct connection of a 3 /4" hose from washing machines 





40 5V871 BGEWN 70 54 

Adjustable Sink Trap – 75mm seal 

z For direct connection of one or two 3 /4" hoses from washing 

machines or dishwashers 



SIZE NO. COLOUR A (min) A (max) B C 

40 5V869 BGEWN 195 260 63 65 


EMAIL 

info@wavin.co.uk


Reducers ■ Flexible Connectors 

Reducers 

Flexible Connectors 



Outlet Reducer 

z To reduce the spigot diameter of an existing 40mm [1 1 /2"] BSPT 

waste outlet to 32mm [1 1 /4"] BSPT waste outlet 


NOM. PART 


40x32 5V612 BGEWN 

Inlet Reducer 

z To reduce the trap inlet diameter to allow a 40mm [1 1 /2"] trap 

to be used with a 32mm [1 1 /4"] waste outlet 


NOM. PART 


40x32 5V616 BGEWN 

Flexible Spigot Connector 

z Provided with a captive nut at one end and a 32mm [1 1 /4"] 

or 40mm [1 1 /2"] spigot at the other 




32 4V901 BGEWN 450 

40 5V901 BGEWN 450 

Flexible Spigot Connector 

z Provided with a captive nut at one end and a 32mm [1 1 /4"] 

or 40mm [1 1 /2"] spigot at the other 




32 4V902 BGEWN 165-290 

40 5V902 BGEWN 165-290 

Flexible Socket Connector 

z Provided with a captive nut at each end 




32 4V903 BGEWN 165-290 

40 5V903 BGEWN 165-290 


Washing Machine Traps ■ Reducers ■ Connectors 75

76 

Pipe 

Pipe Clip 

Socket 

Bends 

Tee 


01249 766611 

PVC-U SOLVENT WELD OVERFLOW SYSTEM 


01249 766655 

Pipe Clip 

Pipe ■ Pipe Clip ■ Socket ■ Bends ■ Tee 





19 1O074 BGEWN 4 





19 1O082 BGEWN 18 21 

Double Socket 




19 1O104 BGEWN 49 2 

Bend – 90° 




19 1O160 BGEWN 32 

Bend – 45° 




19 1O163 BGEWN 24 

Tee – 90° 




19 1O190 BGEWN 31 31 


TECHNICAL FAX 

01249 766653 

EMAIL 

info@wavin.co.uk

PVC-U SOLVENT WELD OVERFLOW SYSTEM: OsmaWeld 


Connectors 

Adaptors 




z Flanged, threaded connector at one end, 19mm solvent weld 

socket at the other 

z Includes two gaskets for connecting to tanks or cisterns 




19 1O129 BGEWN 21 

Bent Tank Connector – 90° 

z Flanged, threaded connector at one end, 19mm solvent weld 






19 1O139 BGEWN 31 20 


z Threaded nut connector at one end, 19mm solvent weld socket 

at the other 

z The nut connects to 3 /4" BSPT male thread 




19 1O156 BGEWN 50 

Compression Fitting Adaptor – Straight 

z Spigot connects to compression fitting manufactured to BS 659, 

socket connects to 19mm [ 3 /4] PVC-U Solvent Weld Overflow Pipe 

z Can also connect PVC-U Solvent Weld Overflow to Tundish 

1O149 (page 78) or WasteFlow Units 5V835, 5V836, 5V837 

(pages 72-73) 




19 1O158 BGEWN 50 

Compression Fitting Adaptor – 90° 

z Spigot connects to compression fitting manufactured to BS 659, 

socket connects to 19mm [ 3 /4] PVC-U Solvent Weld Overflow Pipe 

z Can also connect PVC-U Solvent Weld Overflow to Tundish 

1O149 (page 78) or WasteFlow Units 5V835, 5V836, 5V837 

(pages 72-73) 




19 1O159 BGEWN 31 47 


Pipe ■ Pipe Clip ■ Socket ■ Bends ■ Tee ■ Connectors ■ Adaptors 77

78 

Tundish 


01249 766611 



01249 766655 

Tundish 

z Provides an air break 

z Used with connectors 1O158 or 1O159 (page 77) 




19 1O149 BGEWN 28 88 


TECHNICAL FAX 

01249 766653 

Tundish 

EMAIL 

info@wavin.co.uk

PP PUSH-FIT OVERFLOW SYSTEM: ClearBore (BS 5255) 

Pipe ■ Pipe Clip ■ Socket ■ Bends 

Pipe 

Pipe Clip 

Socket 

Bends 







19 1C074 BGEWN 4 

Pipe Clip 





19 1C082 BGEWN 21 18 

Double Socket 




19 1C104 BGEWN 51 3 

Bend – 90° 




19 1C160 BGEWN 37 

Bend – 45° 




19 1C163 BGEWN 35 

PP PUSH-FIT OVERFLOW SYSTEM 

(Also PVC-U Solvent Weld Overflow) 79

80 

Tee 

Connector 

Tundish 


01249 766611 

PP PUSH-FIT OVERFLOW SYSTEM: ClearBore 


01249 766655 

Tee – 90° 

Bent Tank Connector – 90° 

TECHNICAL FAX 

01249 766653 

Tee ■ Connector ■ Tundish 




19 1C190 BGEWN 37 37 

z Flanged, threaded connector at one end, 19mm push-fit 



z Bend can be cut off to convert to straight tank connector 




19 1C139 BGEWN 37 18 

Tundish 

z Provides an air break 

z Connects directly to PP Push-Fit Overflow pipework 




19 1O149 BGEWN 28 88 


EMAIL 

info@wavin.co.uk

SOIL & WASTE SYSTEMS: Ancillaries 

Cleaner ■ Cement ■ Lubricant 

Cleaner 


Lubricant 

Silicone 

Lubricant 

Spray 



Degreasing Cleaner No. 1 

z Use for cleaning solvent weld joints prior to assembly. See 

Design and Installation Guide for safety information 

z See page 11 for usage allowances 

SIZE PART 

NO. 

125ML 4S379 

250ML 4S380 

Solvent Cement No. 2 

z Use for making solvent weld joints. 

z See Design and Installation Guide for safety information 


SIZE PART 

NO. 

125ML 4S383 

250ML 4S384 

500ML 4S385 

Solvent Cement Filler 

z See Design and Installation Guide for safety information 


SIZE PART 

NO. 

200G 4S394 

Silicone Lubricant 

z Use to aid assembly of ring-seal socket-and-spigot joints 


SIZE PART 

NO. 

50G 4S391 

Silicone Lubricant Spray 

z Supplied in 400ml spray can 

z Use to aid assembly of ring-seal socket-and-spigot joints 

SIZE PART 

NO. 

400ML 4S392 

SOIL & WASTE: Ancillaries 

Including Cleaner (Also PP Push-Fit Overflow system) 81

82 

For Push-Fit Soil 


01249 766611 

A 


01249 766655 

SOIL & WASTE SYSTEMS: Spares 

Snap Cap 

Sealing Ring 

z Synthetic rubber sealing ring for all standard 

OSMA ring-seal fittings 

MATERIAL: EPDM 

NOM. PART 

SIZE NO. 

82 3S130 

110 4S130 

160 6S130 

Access Liner 

z For use with 4S274/275/374 or 4S502 

z NOT for use with 4S169/369 or 4S469 


NOM. PART 

SIZE NO. 

110 4S902 

Access Liner 

z For use with 4S169/369 or 4S469 

z NOT for use with 4S274/275/374 or 4S502 


NOM. PART 

SIZE NO. 

110 4S909 

Access Cap 

TECHNICAL FAX 

01249 766653 

For Push-Fit Soil 

z Snap-on cap which retains the sealing ring in all standard 

OSMA ring-seal fittings 


NOM. PART 

SIZE NO. COLOURS 

82 3S116 BGEWN 

110 4S116 BGEWN 

160 6S116 BGEWN 

z For use with 4S274/275/374/502/169/369 or 4S469 

z NOT for use with 4S292 


NOM. PART 

SIZE NO. 

110 4S904 

Access Cap Gasket 


NOM. PART 

SIZE NO. 

110 4S992 


EMAIL 

info@wavin.co.uk


For Clearbore Waste 

For ClearBore Push-Fit Waste (BS 5255) 

For Solvent Weld Overflow 



‘Y’ Ring 


NOM. PART 

SIZE NO. 

32 4C112 

40 5C112 

Back Nut 

z For Tank Connectors 


NOM. PART 

SIZE NO. 

19 1O369 

SOIL & WASTE: Spares 

For: Push-Fit Soil ■ Solvent Weld Soil 

83

84 

Materials 

Pipes and most fittings in OSMA Soil & 

Waste systems are manufactured from the 

following materials, as individually denoted 

in the product listings in this Guide 

MATERIAL SYSTEMS 

PVC-U Soil systems and 

Unplasticised Overflow system: 

Polyvinyl Chloride OsmaWeld 

MUPVC Modified MUPVC Solvent 

Unplasticised 

Polyvinyl Chloride 

Weld Waste system 

PP Push-Fit Waste 

Polypropylene system and 

Overflow system: 

ClearBore 

ABS Acrilonytrile ABS Solvent 

Butadiene 

Stryrene 

Weld Waste system 

PE Polyethylene V-Joint Traps 


01249 766611 

Acceptance 


01249 766655 


OSMA Soil & Waste systems comply, 

where applicable, with the requirements 

of the following British Standards: 

BS 3943:1983 Specification 

for waste traps 

BS 4514:2001 Unplasticised PVC soil 

and ventilating pipes, fittings and 

accessories (82.4mm minimum mean 

outside diameter) 

BS 5255:1989 Thermoplastic waste 

pipes and fittings 

BS 6209:1982 Solvent cement for nonpressure 

thermoplastics pipe systems 

BS EN 1329-1:2000 Plastics piping 

systems for soil and waste discharge 

(low and high temperature) within the 

building structure. PVC-U 

BS EN 1451-1:2000 Plastics piping 

systems for soil and waste discharge 

(low and high temperature) within the 

building structure. PP 

The British Standard Kitemark 

identifies pipe and fittings that 

are manufactured under the 

BSI certification scheme. 

OSMA Soil systems have been 

awarded British Board of Agrément 

[BBA] certification as follows: 

– Air Admittance Valve 40 and 

Air Admittance Valve 110 

(page 48 and 67) – 86/1643 

– 110mm Adjustable Bends 

(page 20) – 89/2174 

TECHNICAL FAX 

01249 766653 

General Information 

References 

OSMA Soil & Waste systems should be 

designed and installed in accordance with 

the guidance provided in the appropriate 

sections of the following: 

Building Regulations 2000 

(England and Wales): 

Approved Document H, Part H1 

Building Standards (Scotland) 

Regulations 1993-2002 (including 

current amendments: Technical 

Standards Part M) 

Building Regulations (Northern 

Ireland) 2000: Technical Booklet N 

BS 8000 Workmanship on 

Building Sites: Part 13: 1989 Code 

of Practice for above ground drainage 

and sanitary appliances 

BS 752: 1997 Code of Practice for 

building drainage 

BS EN 12056: 2000 Gravity drainage 

systems inside buildings: Part 3 Roof 

drainage, layout and calculation 

Painting plastics: IP 11/1979. 

Watford, BRE 1979 

Water Regulations Guide: 

London, Water Regulations Advisory 

Scheme, 2000 

EMAIL 

info@wavin.co.uk


General Information 

Health and Safety 

The relevant provisions of the following 

legislation should be adhered to on site: 

Construction (Design and 

Management) Regulations 1994 

Control of Substances Hazardous 

to Health Regulations 1988 

Health and Safety at Work Act 1974 

Management of Health and Safety 

at Work Regulations 1999 

Manual Handling Operations 

Regulations 1992 

Hazards associated with 

PVC-U, MUPVC, ABS, 

Polypropylene and 

Polyethylene 

There are no particular hazards 

associated with handling, cutting or 

working with the materials mentioned 

above, and protective clothing or 

equipment is not normally required. 

Copies of Safety Data Sheets covering 

PVC-U, ABS, MUPVC, PP, PE, lubricant, 

solvent cements and cleaners 

are available from the Wavin Technical 

Design Department. Contact Wavin 

Technical Enquiries. 

How to Order 

Each product is identified by a Part 

Number, followed by (where relevant) 

the relevant colour reference to 

provide the full Catalogue Code. 

Colour reference codes are as follows: 

Colour Ref. Code 

Black B 

Grey G 

Olive E 

White W 

Brown N 



Abbreviations 

P/E: Pipe and fittings with both ends 

plain or with one plain end and 

one special end. 

S/S: Pipe and fittings with one or 

more ring-seal or push-fit 

sockets, but always one plain 

or special end. 

D/S: Fittings with ring-seal or push-fit 

sockets at all ends. 

S/SW: Fittings with one or more 

ring-seal sockets but always 

one solvent socket. 

SW/S: Fittings with one or more solvent 

sockets and one plain or 

special end. 

D/SW: Fittings with solvent sockets 

at all ends. 

Supply 

All OSMA systems are supplied through 

a nationwide network of merchant 

distributors. For details of your nearest 

stockist, contact Wavin Customer Services. 

Sealing Rings 

Where applicable, Sealing Rings are 

supplied fitted to each component and 

are included in the price. 

Conditions of sale 

The Company will not accept 

responsibility for the malfunction of any 

installation which includes components 

not supplied by Wavin Plastics Limited. 

Goods are sold subject to Company 

conditions of sale. 

EXAMPLE: 

The Part Number for a 110mm Soil Pipe Bracket is 4S082. This is available 

in a choice of five colours: Black (B), Grey (G), Olive (E), White (W), and Brown (N). 

To order 40 x 110mm Soil Pipe Brackets in Grey, simply quote: 

Quantity required plus 

Catalogue Code (i.e. Part Number with the Colour Reference Code added) plus 

Description 

Thus, the order would be: 40 x 4S082G 110mm Soil Pipe Brackets. 

To place an order, contact Wavin Sales Office 

Tel: 01249 766611 Fax: 01249 443473 


General Information 85

86 


PVC-U Ring Seal Soil System 

Pipes 14 

Brackets 15-16 

Suspended Brackets 16 

Suspended Brackets (components) 16 

Sockets 17 

Connectors 17-18 

Reducers 18 

Bends 18-20 

Adjustable Bends 20 

Offset Bends 20-21 

Soil Manifold System 21-22 

Single Branches 22-23 

Double Branches 24 

Corner Branch 24 

Bossed Pipes 25-26 

Strap Bosses 26 

Boss Socket Adaptors 27 

Access Fittings 27-29 

Plugs 29 

Waste Systems 

ABS Solvent Weld 

Waste System 

Pipe 49 

Bracket 49 

Pipe Clip 49 

Sockets 49 

Bends 50 

Tees 51 

Cross 51 

Plug 51 

Connectors and Adaptors 52-53 

Reducers 54 


Waste System 

Pipe 55 

Bracket 55 

Sockets 55 

Bends 56 

Tees 57 

Plug 57 

Connectors and Adaptors 57-59 

Reducers 59 


01249 766611 


Soil System 

Pipe 30 

Brackets 30 

Suspended Brackets 31 

Suspended Brackets (components) 31 

Sockets 32 


Reducers 33 

Adaptor 33 

Bends 34 

Offset Bends 35 

Single Branches 35-36 

Double Branch 36 

Corner Branch 36 

Bossed Pipes 36-37 

Strap Boss 38 

Boss Socket Adaptor 38 

Access Fittings 38-39 

Plugs 40 

PP Push-Fit Waste System 

(BS EN 1451-1) 

Pipe 60 

Bracket 60 

Socket 60 

Bends 61 

Tee 61 

Plug 62 

Connector 62 

Reducers 62 

PP Push-Fit Waste System: 

ClearBore (BS 5255) 

Pipe 63 

Bracket 63 

Pipe Clip 63 

Socket 63 

Bends 63-64 

Tee 64 

Plug 64 


Reducers 66 


01249 766655 


TECHNICAL FAX 

01249 766653 

General Index 

WC Connectors 

WC Manifold Branches 

WC Connectors 

41-42 

(incorporating Gasket) 42-43 

WC Connectors (Gasket to be fitted) 44 

WC Gasket 44 

WC Connectors (ancillaries) 45 

Easy-Fit Pan Connectors 45-46 

Vents 

Terminal Fittings 47 

Air Admittance Valves 48 

Pipe Flashings 48 

Fire Stop Seals 48 

Vents 

Air Admittance Valve 67 

Fire Stop Seal 67 

V-Joint Traps 

90° All-Fit Conversion Bends 68 

Bottle Traps 68-69 

Tubular Traps 69-70 

Bath Traps 70-71 

Shower Traps 71 

Shower Gullies 72 

WasteFlow Units 72-73 

Washing Machine Traps 73-74 

Reducers 75 

Flexible Connectors 75 

EMAIL 

info@wavin.co.uk


General Index 

Overflow Systems 


Overflow System 

Pipe 76 

Pipe Clip 76 

Socket 76 

Bends 76 

Tee 76 

Connectors 77 

Adaptors 77 

Tundish 78 

Ancillaries 

Cleaner 81 

Solvent Cement 81 

Lubricant 81 

Push-Fit Soil Spares 82 

ClearBore Waste BS 5255 Spares 83 

Solvent Weld OverFlow Spares 83 



PP Push-Fit 

Overflow System: ClearBore 

Pipe 79 

Pipe Clip 79 

Socket 79 

Bends 79 

Tee 80 

Connector 80 

Tundish 80 

Supporting Information 

Estimating Data 11 

Jointing Material Allowance 11 

Supporting Information 2-11 

Literature Requests 3 

Materials 84 

Acceptance 84 

References 84 

Health and Safety 85 

Abbreviations 85 

Supply 85 

Special Fabrication 85 

Sealing Rings 85 

Conditions of Sale 85 

How to Order 85 


General Index 87

88 

Part Number Index 

Part Nom 

No Size Description Page No 

1C074 19 Plain-Ended Pipe – 4m 79 

1C082 19 Pipe Clip 79 

1C104 19 Double Socket 79 

1C139 19 Bent Tank Connector – 90° 80 

1C160 19 Bend – 90° 79 

1C163 19 Bend – 45° 79 

1C190 19 Tee – 90° 80 

1O074 19 Plain-Ended Pipe 76 

1O082 19 Pipe Clip 76 

1O104 19 Double Socket 76 

1O129 19 Straight Tank Connector 77 

1O139 19 Bent Tank Connector – 90° 77 

1O149 19 Tundish 78,80 

1O156 19 Cap and Liner 77 

1O158 19 Compression Fitting Adaptor – Straight 77 

1O159 19 Compression Fitting Adaptor – 90° 77 

1O160 19 Bend – 90° 76 

1O163 19 Bend – 45° 76 

1O190 19 Tee – 90° 76 

1O369 19 Back Nut 84 


2C081 50 Pipe Bracket 63 

2C103 50 Universal Connector 65 


2C126 50 Male Iron Connector 65 

2C161 50 Knuckle Bend – 90° 63 

2C163 50 Bend – 45° 64 

2C190 50 Tee – 871 /2° 64 

2C292 50 P/E Access Plug 64 

2M073 50 Plain-Ended Pipe – 3m 55 

2M081 50 Pipe Bracket 55 

2M104 50 Double Socket 55 

2M124 50 Expansion Socket 55 

2M160 50 Knuckle Bend – 90° 56 

2M161 50 Bend – 871 /2° 56 

2M163 50 Bend – 45° 56 

2M190 50 Tee – 871 /2° 57 

2M210 50 Tee – 45° 57 

2M260 50 Spigot Bend – 90° 56 

2M292 50 P/E Access Plug 57 

2M456 50x40 Concentric Reducer 59 


2S001 50 Fire Stop Seal 48,67 

2S298 32 SW/S Solvent Weld Boss Adaptor 38 


2S354 40 All-Fit Reducer – 40:32mm 21 

2S355 50 All-Fit Reducer – 50:40mm 21 

2S356 50 All-Fit 90° Spigot Bend – 50:40mm 22 

2S360 50 S/S Ring-Seal Boss Adaptor – 90° 27 

2S398 32 S/S Ring-Seal Boss Adaptor 27 




2V500 50 Shower Gully for Tiled Floor 72 

2V501 50 Stainless Steel Adaptor – for 2V500 72 

2V510 50 Shower Gully for Sheet Floor 72 

2V511 50 Shower Gully for Sheet Floor 72 

2V801 50 Tubular ‘P’ Trap – 75mm seal 69 

2V805 50 Running ‘P’ Trap – 75mm seal 69 

2W073 50 Plain-Ended Pipe – 3m 60 

2W081 50 Pipe Bracket 60 

2W086 50x40 Level Invert Reducer 62 

2W088 50x32 Level Invert Reducer 62 


01249 766611 


01249 766655 


TECHNICAL FAX 

01249 766653 


Part Nom 


2W105 50 Double Socket 60 

2W160 50 Knuckle Bend – 90° 61 

2W161 50 Bend – 871 /2° 61 

2W163 50 Bend – 45° 61 

2W190 50 Tee – 871 /2° 61 

2W260 50 Spigot Bend – 90° 61 

2W292 50 Access Plug 62 

2Z073 50 Plain-Ended Pipe – 3m 49 


2Z081 50 Pipe Bracket 49 

2Z086 50x40 Level Invert Reducer 54 


2Z104 50 Double Socket 49 

2Z124 50 Expansion Socket 49 

2Z126 50 Male Iron Connector – Ring Seal 58 

2Z127 50 Female Iron Connector 53,58 

2Z128 50 Male Iron Connector – Solvent Weld 53,58 

2Z161 50 Bend – 871 /2° 50 

2Z163 50 Bend – 45° 50 

2Z190 50 Tee – 871 /2° 51 

2Z210 50 Tee – 45° 51 

2Z230 50 Cross – 871 /2° 51 

2Z292 50 P/E Access Plug 51 

2Z347 50x32 Concentric Reducer 66 


2Z359 50 Long-Tail Bend – 871 /2° 50 


3S042 82 Socketed Pipe – 2m 14 



3S074 82 Plain-Ended Pipe – 4m 14 

3S082 82 Pipe Bracket 15 

3S083 82 Socket Bracket 15 

3S084 82 Pipe or Socket Bracket 15 

3S094 82x50 S/S Reducer 18 

3S105 82 D/S Double Socket 17 

3S116 82 Snap Cap 82 

3S124 82 S/SW Single Socket 17 

3S130 82 Sealing Ring 82 

3S134 82 P/E Connector to Cast-Iron Spigot 18 

3S161 82 S/S Bend – 871 /2° 18 

3S162 82 S/S Bend – 671 /2° 19 

3S163 82 S/S Bend – 45° 19 

3S190 82 S/S Single Branch – 871 /2° 22 


3S274 82 S/S Access Pipe 27 

3S292 82 P/E Access Plug 29 

3S300 82 Weathering Collar 47 

3S302 82 Balloon Grating 47 

3S319 82 Strap Boss 26 

3S435 82 SW/S Offset Bend 20 

3S440 82 S/SW Offset Bend 20 

3S444 82 S/S Offset Bend 21 

3S649 82 S/S Bossed Pipe 25 

4A830 32 90° All-Fit Conversion Bend 68, 83 





4C102 32 Universal Connector 52,57,65 



4C112 32 ‘Y’ Ring 83 

EMAIL 

info@wavin.co.uk




Part Nom 



4C160 32 Knuckle Bend – 90° 63 

4C161 32 Bend – 871 /2° 63 

4C163 32 Bend – 45° 64 

4C185 32 Straight Tank Connector 63 

4C190 32 Tee – 871 /2° 64 

4C263 32 Spigot Bend – 45° 64 


4C365 32 Connector to BS 659 Copper 

Compression Fitting 65 





4M160 32 Knuckle Bend – 90° 56 

4M161 32 Bend – 871 /2° 56 

4M163 32 Bend – 45° 56 

4M190 32 Tee – 871 /2° 57 

4M210 32 Tee – 45° 57 

4M260 32 Spigot Bend – 90° 56 






4S050 110 Socketed Pipe – 2.5m 14 

4S073 110 Plain-Ended Pipe – 3m 14,30 


4S082 110 Pipe Bracket 15,30 

4S083 110 Socket Bracket 15,30 

4S084 110 Pipe or Socket Bracket 15,30 

4S085 110 Adjustable Socket Bracket and 

Brace Assembly 16,31 

4S086 110 Adjustable Pipe Bracket Assembly 16,31 

4S095 110x82 S/S Reducer 18,33 

4S096 110x50 S/S Reducer 18 

4S104 110 D/SW Double Socket 17,32 

4S105 110 D/S Double Socket 17,32 

4S106 10 S/S Connector to Cast-Iron Socket 17 

4S107 110 S/S Connector to Cast-Iron or 

Clay Drain Socket 17 

4S116 110 Snap Cap 82 

4S119 110 Gasket 18,32 

4S120 110 WC Gasket 4” to 41 /2” 44 

4S121 110 WC Gasket 41 /4” to 41 /2” 44 

4S124 110 S/SW Single Socket 17,32 


4S134 110 P/E Connector to Cast-Iron Spigot 18,32 

4S161 110 S/S Bend – 871 /2° 18 

4S162 110 S/S Bend – 671 /2° 19 

4S163 110 S/S Bend – 45° 19 

4S164 110 S/S Bend – 76° 19 

4S166 110 S/S Bend – 30° 19 

4S167 110 S/S Bend – 15° 20 

4S169 110 S/S Access Bend – 871 /2° 28 

4S173 110 Adjustable Bend – 30° 20 

4S179 110 Adjustable Bend – 90° 20 


4S195 110 S/S Single 5-Boss Branch 871 /2° 22 


4S206 110 Connector to Cast-Iron Socket 18,33 

4S210 110 S/S Single Branch – 45° 23 

4S220 110 S/S Single Branch – 76° 23 

4S230 110 S/S Double Branch – 871 /2° 24 

4S250 110 S/S Double Branch – 45° 24 



Part Nom 


4S260 110 SW/S Long-Tail Bend – 871 /2° 34 

4S263 110 S/SW Bend – 45° 34 

4S268 110 S/SW Bend – 111 /4° 34 

4S274 110 S/S Bossed Access Pipe 28 

4S275 110 Access Saddle 29,39 

4S281 - Varpitch Pipe Flashing for Flat Roofs 48 

4S283 400x450 Varpitch Pipe Flashing for Pitched Roofs 48 

4S285 600x600 Varpitch Pipe Flashing for Pitched Roofs 48 

4S290 110 SW/S Single Branch – 871 /2° 35 

4S291 110 S/S Corner Branch – 871 /2° 24 

4S292 110 P/E Access Plug 29,40 

4S296 110 P/E Socket Plug 29,40 



4S303 110 OsmaVent 40 Air Admittance Valve 48,67 

4S304 110 OsmaVent 110 Air Admittance Valve 48 

4S310 110 SW/S Vent Cowl 47 

4S318 110 Back-to-Back Strap Boss 26 

4S319 110 Strap Boss 26,38 

4S361 110 S/SW Bend – 871 /2° 19 

4S363 110 S/SW Bend – 45° 19 

4S369 110 S/SW Access Bend – 871 /2° 28 

4S374 110 S/SW Bossed Access Pipe 28 

4S379 - Degreasing Cleaner No.1 – 125ml 81 

4S380 - Degreasing Cleaner No.1 – 250ml 81 

4S383 - Solvent Cement No.2 – 125ml 81 



4S391 - Silicone Lubricant – 50g 81 

4S392 - Silicone Lubricant Spray – 400ml 81 

4S394 - Solvent Cement Filler – 200g 81 

4S395 110 S/SW Single 5-Boss Branch – 871 /2° 22 

4S410 110 D/SW Single Branch – 45° 36 

4S416 110 Expansion Cap 33 

4S430 110 D/SW Double Branch – 871 /2° 36 

4S435 110 SW/S Offset Bend 20,35 


4S444 110 S/S Offset Bend 21 

4S445 110 D/S Offset Bend 21 

4S450 110 D/SW Offset Bend 35 

4S461 110 D/SW Bend – 871 /2° 34 

4S462 110 D/SW Bend – 671 /2° 34 

4S463 110 D/SW Bend – 45° 34 

4S469 110 D/SW Bossed Access Bend – 871 /2° 39 

4S474 110 D/SW Bossed Access Pipe 38 

4S483 100x32 D/SW Bossed Pipe 37 

4S484 110x40 D/SW Bossed Pipe 37 

4S490 110 D/SW Single Branch – 871 /2° 35 

4S491 110 SW/S Corner Branch – 871 /2° 36 

4S492 110 SW/S Access Plug 40 

4S493 110 D/SW Bossed Access Branch 871 /2° 39 

4S495 110 D/SW Single 5-Boss Branch – 871 /2° 35 

4S496 110x50 SW/S Reducer 33 

4S502 110 S/S Access Branch – 871 /2° 29 

4S574 110 SW/S Bossed Access Pipe 38 

4S581 110x32 S/S Bossed Pipe 25 

4S582 110x40 S/S Bossed Pipe 25 

4S583 110x32 D/SW Ring-Seal Bossed Pipe 25 

4S584 110x40 D/SW Ring-Seal Bossed Pipe 25 

4S585 110 SW/S Bossed Pipe 37 

4S586 110 D/SW Bossed Pipe 37 

4S588 110 D/SW Short Bossed Pipe 26,37 


4S590 110 S/SW Bossed Pipe 26,37 

4S595 110 OsmaLink Soil Manifold 21 

4S600 110 Plain-Ended Pipe 45 

Part Number Index continued overleaf 


Part Number Index 89

90 


Part Nom 


4S601 110 S/SW Manifold Branch – Straight 41 

4S602 110 S/SW Manifold Branch (LH) 41 

4S603 110 S/SW Manifold Branch – 151 /2° (LH) 41 

4S604 110 S/SW Manifold Branch – 23° (LH) 41 

4S605 110 S/SW Manifold Branch – 301 /2° (LH) 41 

4S606 110 S/SW Manifold Branch – 38° (LH) 42 

4S612 110 S/SW Manifold Branch (RH) 41 

4S613 110 S/SW Manifold Branch – 151 /2° (RH) 41 

4S614 110 S/SW Manifold Branch – 23° (RH) 41 

4S615 110 S/SW Manifold Branch – 301 /2° (RH) 41 

4S616 110 S/SW Manifold Branch – 38° (RH) 42 

4S700 110 Breather Vent 47 

4S709 110 SW/S Extract Valve 47 

4S711 110 P/E Connector – 14° 42 

4S712 110 SW/S Connector –14° 42 

4S730 110 SW/S Connector – Straight 44 

4S731 110 P/E Connector – Straight 44 

4S745 110 SW/S Connector – 871 /2° 44 

4S746 110 P/E Connector – 871 /2° 44 

4S761 110 P/E Connector – 90° 43 

4S762 110 SW/S Access Connector – 90° 43 

4S771 110 P/E Connector – 90° 43 

4S772 110 SW/S Connector – 90° 43 

4S790 110 S/S Long-Tail Bend – 871 /2° 45 

4S791 110 P/E Connector – 21 /2° 42 

4S792 110 SW/S Connector – 21 /2° 42 

4S902 110 Access Liner 82 

4S904 110 Access Cap 82 

4S909 110 Access Liner 82 

4S992 110 Access Cap Gasket 82 


4V803 32 Tubular ‘S’ Trap – 75mm seal 69 

4V804 32 Variform Trap – 75mm seal 70 


4V806 32 Bath Trap – shallow seal 70 

4V807 32 Adjustable Tubular ‘P’ Trap – 75mm seal 69 

4V808 32 Adjustable Bottle Trap – 75mm seal 69 

4V809 32 Bottle Trap – 38mm seal 68 


4V814 32 Anit-Syphon Bottle Trap – 75mm seal 68 

4V816 32 Re-Sealing Bottle Trap – 75mm seal 68 

4V825 32 Straight Through Trap – 75mm seal 70 

4V901 32 Flexible Spigot Connector – 450mm 75 

4V902 32 Flexible Spigot Connector – 165-290mm 75 

4V903 40 Flexible Socket Connector – 165-290mm 75 



4W102 32 Universal Connector 62 


4W160 32 Knuckle Bend – 90° 61 

4W161 32 Bend – 871 /2° 61 

4W163 32 Bend – 45° 61 

4W190 32 Tee – 871 /2° 61 

4W260 32 Spigot Bend – 90° 61 



01249 766611 


01249 766655 


TECHNICAL FAX 

01249 766653 


Part Nom 





4Z082 32 Pipe Clip 49 



4Z126 32 Male Iron Connector – Ring Seal 52,58 

4Z127 32 Female Iron Connector – 

with solvent weld socket 53,58 

4Z128 32 Male Iron Connector – 


4Z160 32 Knuckle Bend – 90° 50 

4Z161 32 Bend – 871 /2° 50 

4Z163 32 Bend – 45° 50 

4Z184 32 Connector to BS 659 Copper Spigot 53,59,65 

4Z185 32 Straight Tank Connector 52,57 

4Z190 32 Tee – 871 /2° 51 

4Z210 32 Tee – 45° 51 

4Z260 32 Long-Tail Bend – 90° 50 


4Z343 32x19 Reducer to 19mm Copper Pipe 66 

4Z364 32 Cap and Liner 52,58 

4Z365 32 Connector to BS 659 Copper 

Compression Fitting 53,59 

5A830 40 90° All-Fit Conversion Bend 68 





5C084 40x32 S/S Reducer 66 

5C102 40 Universal Connector 52,57,65 



5C112 40 ‘Y’ Ring 83 


5C160 40 Knuckle Bend – 90° 63 

5C161 40 Bend – 871 /2° 63 

5C163 40 Bend – 45° 64 

5C185 40 Straight Tank Connector 64 

5C190 40 Tee – 871 /2° 64 

5C263 40 Spigot Bend – 45° 64 


5C345 40 Universal Compression Reducer 66 

5C365 40 Connector to BS 659 Copper 

Compression Fitting 65 





5M160 40 Knuckle Bend – 90° 56 

5M161 40 Bend – 871 /2° 56 

5M163 40 Bend – 45° 56 

5M190 40 Tee – 871 /2° 57 

5M210 40 Tee – 45° 57 

5M260 40 Spigot Bend – 90° 56 



5V612 40 Outlet Reducer – 40x32mm 75 

5V616 40 Inlet Reducer – 40x32mm 75 

EMAIL 

info@wavin.co.uk




Part Nom 



5V802 40 Bath Trap – 38m seal 70 

5V803 40 Tubular ‘S’ Trap – 75mm seal 69 

5V804 40 Variform Trap – 75mm seal 70 


5V806 40 Bath Trap – shallow seal 70 

5V807 40 Adjustable Tubular ‘P’ Trap – 75mm seal 69 

5V808 40 Adjustable Bottle Trap – 75mm seal 69 



5V814 40 Anit-Syphon Bottle Trap – 75mm seal 68 

5V816 40 Re-Sealing Bottle Trap – 75mm seal 68 

5V823 40 Shower Trap – 19mm seal 71 

5V824 40 Shower Trap – 50mm seal 71 

5V836 40 WasteFlow Tee – 2-way with 1 plug 73 

5V837 40 WasteFlow Tee – 4-way with 3 plugs 73 

5V842 40 Anit-Syphon Bath Trap – 75mm seal 71 

5V846 40 Bath Trap – 75mm seal 70 

5V848 40 Bath Trap and Overflow – 75mm seal 71 

5V859 40 Bath Trap and WasteFlow Unit – 75mm seal 72 

5V860 40 Bath Trap with Extended Body – 60mm seal 71 

5V864 40 Washing Machine Half Trap – 75mm seal 73 

5V868 40 Washing Machine Full Trap – 75mm seal 74 

5V869 40 Adjustable Sink Trap – 75mm seal 74 

5V870 40 Washing Machine Trap with 

Standpipe – 75mm seal 74 

5V871 40 Washing Machine Tee Piece 74 

5V901 40 Flexible Spigot Connector – 450mm 75 

5V902 40 Flexible Spigot Connector – 165-290mm 75 

5V903 32 Flexible Socket Connector – 165-290mm 75 



5W084 40x32 Reducer 62 

5W102 40 Universal Connector 62 


5W160 40 Knuckle Bend – 90° 61 

5W161 40 Bend – 871 /2° 61 

5W163 40 Bend – 45° 61 

5W190 40 Tee – 871 /2° 61 

5W260 40 Spigot Bend – 90° 61 





5Z082 40 Pipe Clip 49 




5Z126 40 Male Iron Connector – Ring Seal 52,58 

5Z127 40 Female Iron Connector – 


5Z128 40 Male Iron Connector – 


5Z160 40 Knuckle Bend – 90° 50 

5Z161 40 Bend – 871 /2° 50 

5Z163 40 Bend – 45° 50 

5Z184 40 Connector to BS 659 Copper Spigot 53,59,65 

5Z185 40 Straight Tank Connector 52,57 

5Z190 40 Tee – 871 /2° 51 

5Z210 40 Tee – 45° 51 

5Z230 40 Cross – 871 /2° 51 

5Z260 40 Long-Tail Bend 90° 50 



5Z364 40 Cap and Liner 52,58 



Part Nom 


5Z365 40 Connector to BS 659 Copper 

Compression Fitting 53,59 






6S082 160 Pipe Bracket 15,30 

6S084 160 Pipe or Socket Bracket 15,30 

6S085 160 Adjustable Socket Bracket 

and Brace Assembly 16,31 

6S086 160 Adjustable Pipe Bracket Assembly 16,31 

6S099 160x110 S/S Reducer 18 

6S104 160 D/SW Double Socket 17,32 

6S105 160 D/S Double Socket 17,32 

6S116 160 Snap Cap 82 

6S124 160 S/SW Single Socket 17,32 


6S134 160 P/E Connector to Cast-Iron Spigot 18,32 

6S161 160 S/S Bend 871 /2° 18 

6S162 160 S/S Bend 671 /2° 19 

6S163 160 S/S Bend 45° 19 


6S198 160 S/S Unequal Single Branch – 871 /2° 23 

6S238 160 S/S Unequal Double Branch – 871 /2° 24 

6S274 160 S/S Bossed Access Pipe 28 

6S292 160 P/E Access Plug 29,40 



6S416 160 Expansion Cap 33 

6S435 160 SW/S Offset Bend 20 


6S461 160 D/SW Bend – 871 /2° 34 

6S463 160 D/SW Bend – 45° 34 

6S474 160 SW/S Bossed Access Pipe 38 

6S490 160 D/SW Single Branch – 871 /2° 35 

6S498 160 D/SW Unequal Single Branch – 871 /2° 36 

6S499 160x110 SW/S Reducer 33 


WC003 31 /2” Easy-Fit Connector Straight 45 

WC004 4” Easy-Fit Connector Straight 45 

WC143 31 /2” East-Fit Connector – 14° 46 

WC144 4” East-Fit Connector – 14° 46 

WC203 31 /2” Easy-Fit Offset Connector 45 

WC204 4” Easy-Fit Offset Connector 45 

WC404 4” Straight Extension Piece 46 

WC904 4” Easy-Fit Connector – 90° 46 


Part Number Index 91

92 

Rainwater Product Data 

RoundLine 112mm (4 1 /2”) Half-round gutter system 

Classic, simple shape 

Ideal for domestic/housing projects 

For roof areas up to a maximum of 115m2 with 

one downpipe 

SuperLine 125mm (5”) Half-round gutter system 

Versatile system offering excellent volume 

removal rate 

Suitable for large domestic roof areas and 

small commercial buildings 

RoofLine 150mm (6”) Half-round gutter system 

Very high capacity in a classic profile 

Suitable for large commercial and industrial 

buildings 

Mini-Fit 75mm (3”) Half-round gutter system 

Small profile 

Suitable for porches, conservatories, sheds, 

garages, and other small roof areas 


01249 766611 


01249 766655 

Meets requirements of BS 4576: Part 1: 1989 

Connects to 68mm (21 /2”) circular downpipe 

Available in Black, Grey, White and Brown 


one downpipe 



Available in Black and Brown 


one downpipe 


Connects to 110mm (4”) circular downpipe 

Available in Black and Grey 


one downpipe 

Connects to 55mm (2”) circular downpipe 

Available in Grey and Brown 

TECHNICAL FAX 

01249 766653 

RAINWATER SYSTEMS 

Also available from OSMA 

EMAIL 

info@wavin.co.uk

RAINWATER SYSTEMS 

Also available from OSMA 

Rainwater Product Data 

DeepLine 113mm (4 1 /2”) Semi-elliptical gutter system 

Compact gutter with high capacity 

Suitable for domestic and small commercial 

buildings 


one downpipe 

SquareLine 100mm (4”) Square section gutter system 

Smart , efficient rectilinear profile 

Suitable for domestic buildings 


one downpipe 

Amazon 110x75mm (4x3”) Square section gutter system 

Distinctive, high capacity profiled design 

Suitable for both domestic and small 

commercial buildings 


one downpipe 

Downpipes - Circular Pipe 




Available in Black, Grey, White and Brown 

Connects to 61mm (21 /2”) square and 

(via adaptor) 68mm (21 /2”) circular downpipe, 

installed either flush to wall or off the wall 

Available in Black, White and Brown 

Connects to 70mm (23 /4”) square pipe and 

(via adaptor) 68mm (21 /2”) circular downpipe 

Available in Black, White and Brown 

(All dimensions in millimetres) 

Nominal Outside Dimension Wall Thickness 

System Usage 

Size 

Min Max Min Max 

55 55.3 55.7 1.3 1.5 Mini-Fit 

68 68.3 68.7 1.8 2.1 RoundLine, DeepLine, SuperLine (SquareLine and Amazon via adaptor) 

82 82.4 82.8 3.2 3.5 Domed Roof Outlets 

110 110.0 110.4 3.2 3.5 RoofLine and Domed Roof Outlets 

Downpipes - Square Pipe 

Nominal Outside Dimension Wall Thickness 

Size 

Min Max Min Max 

System Usage 

61 60.60 61.40 1.45 1.75 SquareLine 

70 69.85 70.15 1.85 2.15 Amazon 

(All dimensions in millimetres) 


Rainwater Product Data 93

94 

We would like to keep you updated about new products from Wavin Plastics Ltd. 

If you would like to receive additional literature or require to be removed from our 

database, please complete the form below. Alternately all literature is available to download 

from www.wavinpdfs.co.uk All valid records on the Wavin database 

are entered into a monthly draw for a case of wine. 

First Name 

Surname 

Job Title 

Email 

Company Name 

Address 

Town/City County 

Postcode 

Phone 

Mobile 

Fax 

Architect 

Builder 

Cladder 


01249 

CUSTOMER 

766611 

SERVICES 

01249 766611 

Please tick type of organisation (One only) 

Client Organisation 

Civil Consulting Engineer 

Civil Contractor 

Design & Build 

Environmental Consultant 

Gas Utility Contractor 

Groundworker 

Housing Association 

House Builder (under 20 units per annum) 

Housing Developer 

H & V Contractor 

Would you like more info? 


TECHNICAL 

01249 766655 

ENQUIRIES 

01249 766655 

Irrigation Contractor 

Land Drainage Contractor 

Landfill & Waste Disposal 

Local Authority 

Major Construction Company 

Multi-Utility Contractor 

M & E Contractor 

M & E Consulting Engineer 

Plumber 

Quantity Surveyor 

Roofer 

Utility Company 

Water Utility Contractor 

Wavin Plastics Ltd do not sell or provide data 

to other organisations for direct mail purposes. 

I would like to be removed from your database 

Please do not contact me by Mail Fax Email Telephone 

TECHNICAL FAX 

TECHNICAL 

01249 766653 

FAX 

01249 766653 

I would like further 

information on: 

OSMA Rainwater systems 

OSMA Soil & Waste systems 

OSMA Flexible Plumbing systems 

OSMA Underfloor Heating systems 

OSMA Below Ground Drainage systems 

OSMA Water Management systems 

OSMA Ducting systems 

OSMA Pressure Pipe systems 

Please return to: 

Wavin Plastics Limited 

Parsonage Way 

Chippenham 

Wiltshire 

SN15 5PN 


EMAIL 

EMAIL 

info@wavin.co.uk 

info@wavin.co.uk 

✁


Technical Assistance ■ Further Information 

Technical Advice 

Contents 

and Assistance 

OSMA Soil & Waste systems are backed 

by Wavin’s comprehensive technical 

advisory service. This is available to 

provide expert assistance at every stage 

of a project, from planning and product 

selection to installation and maintenance. 

Services include: 

Full technical literature, including: 

- System Product Guides 

- Design and Installation Guides 

- Trade Price Lists 

Assistance with Soil & Waste systems 

product selection 

On site advice and troubleshooting 

Design and production of bespoke 

fittings to meet specific application 

requirements 

Contact Wavin Technical Design 

Department for prompt assistance: 

TECHNICAL DESIGN 

Tel: 01249 766655 

Fax: 01249 766653 

Email: technical.design@wavin.co.uk 

To request a copy of any item(s) of current 

literature, please contact: 

LITERATURE REQUESTS 

Tel: 01249 766333 

Fax: 01249 766332 

Email: literature@wavin.co.uk 



Further Information 

OSMA SOIL & WASTE SYSTEMS 

The following related publications are available for 

OSMA Soil & Waste systems: 

Design & Installation Guide 

Trade Price List 

ASSOCIATED OSMA SYSTEMS 

OSMA systems are fully integrated to provide a total 

solution for above and below ground drainage, 

plumbing and heating. Contact Wavin Technical 

Design Department for further details regarding: 







OSMA Pressure Pipes for Water 

OSMA Pressure Pipes for Gas 

WAVIN ONLINE 

The complete OSMA product catalogue, together with design and 

installation guidance, is also available online at: www.wavin.co.uk 

All literature can be downloaded via the searchable PDF library at: 

www.wavinpdfs.co.uk 

Wavin images can be downloaded at different resolutions from: 

www.wavinimages.co.uk 


Further Information ■ Technical Assistance 95

Soil & Waste Systems Product Guide 

Meeting your needs 

OSMA Soil & Waste systems, developed by Wavin Plastics 

Limited, form part of a comprehensive range of plastic systems 

to provide intelligent solutions for all building, construction and 

utilities projects. 

These include: 

Above Ground Projects 


OSMA Soil & Waste systems 

Plumbing & Heating Projects 



Below Ground Projects 




Pressure Pipe Projects 

OSMA Pressure Pipes for Water 

OSMA Pressure Pipes for Gas 

All OSMA systems are backed by full 

technical literature and project support. 

See inside back cover for details. 

Wavin Plastics Limited 

Parsonage Way 

Chippenham 

Wiltshire SN15 5PN 

Tel: 01249 766600 

Fax: 01249 443286 

Email: info@wavin.co.uk 

Water UK Partner – Supporting 

information & learning in the water 

industry 

ISO 9001:2000 

Wavin Plastics Limited operates a programme of continuous product development, and therefore reserves the right 

to modify or amend the specification of their products without notice. All information in this publication is given in 

good faith, and believed to be correct at the time of going to press. However, no responsibility can be accepted for 

any errors, omissions or incorrect assumptions. Users should satisfy themselves that products are suitable for the 

purpose and application intended. 


SW206

Soil and waste product guide - CMS

Create successful ePaper yourself

Delete template?

Save as template?