Se den samlede liste med beskrivelser her - Agromek

More documents

Recommendations

Info

Firma/company Hal Stand Produkt Product EUR/DK Beskrivelser Descriptions Ceno Top Aps K 8060 Dal-bo A/S X 1120 Dan Egtved A/S L 9208 Dan-Corn A/S D 3114 Danfoil A/S B 2020 LH-Bio, Biogasraktortank med LH-Bio, Biogas reactor tank with indvendig isolering og tag i rustfri interior insulation and stainless-steel stål. Specialkontrueret skovlomrører roof. Specially constructed spade til indvendig placering agitator for inner installation. ** Kombinationsharve for præcisionssåbedsharvning Boksvand, Flytbart frostfrit drikkesystem for kalve i enkeltbokse DanCorn Mobiltørreri DC163CE og DC243CE Combi-harrow for precision seedbed harrowing ** Box water. Moveable frost-free drinking system for calves in single or common boxes ** DanCorn Mobile dryers, DC163CE and DC243CE ** Injection MultiDose 2012, injektionssystem til marksprøjter Injection MultiDose 2012, injection med tilkoblet gps styring af system for field sprays with linked injektionspumpe til styring efter GPS control of the injection pump in markkort accordance with field charts ** LH-Bio betonreaktor med specialkonstrueret skovlomrører er særlig relevant for gårdbiogasanlæg, der anvender store mængder plantebiomasse. Betonreaktoren er indvendigt isoleret med skummateriale, som er beklædt med et særligt slidstærkt materiale, polypyren. Reaktortanken er forsynet med et fast tag, som giver en bedre isolering end den normale membranoverdækning. Tagkonstruktionen udnyttes som ophæng til skovlomrøreren, der dermed kan placeres centralt i reaktoren. Dette giver en mere effektiv omrøring sammenlignet med røreværker placeret ved reaktorvæggen. Den kraftige præcisionssåbedsharve har en arbejdsbredde på 12,3 meter og vejer ca. 13.000 kg. Harven er konstrueret som en kombination af en tromle og en såbedsharve, ved at der er tromlesektion både før og efter harvesektionen. Ved jordbearbejdning hæves bærehjulene og tromlesektionen, bærer harven og styrer dermed arbejdsdybden. Den store vægt på over 1.000 kg/meter sikrer en god pakkeeffekt. I transportstilling er redskabet 3 meter bred og 4 meter høj. System til tildeling af vand til kalve i enkelt- og fællesbokse. Systemet kan afmonteres i forbindelse med tømning og rengøring af boksene, hvor inventaret i mange tilfælde er flytbart og løftes ud af stalden ved rengøring. Forsyningen til drikkekoppen er frostsikret med cirkulation og består af 2 slanger monteret med snapkoblinger, så de let kan afmonteres af den faste vandinstallation i stalden. Mobiltørrerierne, der produceres af Sukup Manufacturing i USA, har fået specialdesignede centrifugalblæsere, hvorved der opnås to ting. Den ene er at den varme luft, der forefindes under køling af afgrøden, suges ud derfra, og afleveres i det øverste brændkammer, hvor det genanvendes med ny luft udefra. Denne varmegenvinding alene giver en besparelse i gasforbrug på ca. 30%. Det andet der opnås er, at støjniveauet reduceres betragteligt med centrifugalblæser frem for de hidtil anvendte axialblæsere. Injection Multidose 2012 er et nyt system, hvor Danfoil har fuldstændig kontrol med deres velafprøvet Injektionssystem. Med rent vand i tanken kan Danfoil nu styre op til 6 injektionspumper både manuelt og efter signal fra Trimble. Det nye er, at man nu kan styre 2 pumper og hermed 2 forskellige kemikalier efter et Trimble doseringskort. Desuden kan op til 3 forskellige pumper styres efter Trimbles Green Seeker sensor, så brugeren har mulighed for med pcterminal, at kunne styre pesticid reduktion langt nemmere og bedre end hidtil. The LH-Bio concrete reactor with specially constructed spade agitator is particularly relevant for on-farm biogas systems that apply large volumes of plant biomass. This concrete reactor has inner insulation consisting of foam material which is covered with special durable polypyrene. The reactor tank is equipped with a stainless-steel roof, which ensures better insulation in comparison to membrane covers. The roof construction is applied for the suspension of the spade agitator which can thus be positioned in the centre of the reactor. This ensures a more efficient stirring than that which can be attained by installing agitator systems on the reactor wall. This heavy-duty, precision seedbed harrow has an operating width of 12.3 metres and weighs approx. 13,000 kg. The harrow is constructed as a combination of drum and seedbed harrow in that there are drum sections before and after the harrow section. During cultivation, the support wheels are raised and the drum section supports the harrow and thus controls operating depth. The weight of more than 1,000 kg/metre ensures a good packing effect. Transport dimensions are 3 metres in width and 4 metres in height. This is a system for the dispensing of drinking water to calves in single or common boxes. The system can be dismantled and removed for emptying or cleaning the boxes. Other installations are often transportable and can be lifted out of the boxes during cleaning operations. The supply to the drinkers if frost-free due to circulation and consists of 2 hoses installed with snap links for easy installation and removal from the fixed water supply in the livestock housing. These mobile dryers are manufactured by Sukup Manufacturing in the USA. These machines have specially designed centrifugal fans for two purposes. The first advantage is that the warm air created during cooling of the crop is drawn off and delivered to the upper heat chamber where it is recycled with fresh air. This recycling function alone provides gas savings of approx. 30%. The second advantage is that a much lower noise level is attained with the centrifugal fan as against that which was attained with axial fans. Injection Multi-Dose is a new system with which the Danfoil Company has total control with its well-tested injection system. With clean water in the tank, Danfoil can now control up to 6 injection pumps – both manually and via signals from Trimble. The innovation is that one can now control 2 pumps for 2 different chemicals via a Trimble dosage chart. In addition, 3 different pumps can be controlled by Trimble’s Green Seeker sensor so that users are able, via PC, to control pesticide reduction. This can be done far easier and much better that has previously been the case.
Firma/company Hal Stand Produkt Product EUR/DK Beskrivelser Descriptions DeLaval A/S F 5300 Fasterholt Maskinfabrik G 5716 GreenTec C 2720 Grene Danmark A/S H 6210 Grene Danmark A/S H 6210 Grene Danmark A/S H 6210 DeLaval Barn System Controller BSC. DeLaval BSC er et DeLaval Barn System Controller styresystem som integrerer og BSC. The DeLaval BSC is a control kontrollerer et bredt udsnit af system that integrates and controls Delavals produktprogram inden for a wide spectre of the DeLaval range gødningshåndtering, ventilation og of products for manure/slurry lys. handling, ventilation and lighting. ** Fasterholt FM 5500 Hydro, selvkørende vandingsmaskine med Fasterholt FM 5500 Hydro, self- max. 1000 meter slange ø 125 i propelled irrigation machine with diameter max. 1000 metre Ø 125 hose. ** Spearhead Twiga SPV 1, SPV 2 og Spearhead Twiga SPV 1, SPV 2 SPV 3, serie af selvkørende and SPV 3, range of self-propelled rabatklippere med op til 17 meter verge clippers with booms of up to arm. 17 metres ** Young Line, Outdoor mineralholder nr 132 Young Line, OK nr 2000, Langtrug til kalve og får Young Line, plast foderkumme til malkekøer Young Line, Outdoor mineral block holder No. 132 ** Young Line, OK No. 2000, long trough for calves and sheep ** Young Line, plastic feed bowl for dairy cattle ** PC baseret styresystem til styring og kontrol af gødningshåndtering, ventilation og lys i kvægstalde. Systemet kan styre skrabere på gangarealer, omrøring af fortank og overpumpning til gyllebeholder. Systemet indeholder et vejrstationsmodul til styring af gardiner med bl.a. regnsensor. lysprogram til overvågning og styring af den ønskede lysstyrke i stalden. Kunstig belysning styres i forhold til dagslys og regulere automatisk for at sikre et lavt energiforbrug. Overvågning sker via internet og smartphone. FM 5500 Hydro kan vande op til 10 ha i én opstilling med 1.000 meter Ø 125 mm hård slange, afhængig af pumpetryk og vandmængde. Maskinen er opbygget over en ny kraftig undervogn, der som standard er med hydrauliske bremser. Selve fremdriften af maskinen sørger en lille dieselmotor på 6,5 hk for. Dieselmotoren trækker et hydraulisk system der driver fremdriften på 10-80 meter i timen og sikrer olietryk til at trække det hydrauliske trommetræk. Med en dieselmotor til fremdrift skal vandtrykket kun anvendes til at opnå maksimal spredebredde på vandstrålen. Spearhead Twiga SPV1, SPV2 og SPV3 er 3 modeller af selvkørende rabatklippere, med 11 forskellige armlængder fra 8 til 17 meter. Der er mulighed for montering af mange forskellige redskaber på armen som har 180 graders drejeled. John Deere motor fra 115 - 173 hk sørger for trækkraft, og transmissionen gør at den kan arbejde i begge retninger med samme hastighed. Førerkabinen kan drejes 90 grader, hvilket gør at chaufføren kan få udsyn direkte ud til redskabet i armen. Den har Danfoss Load Sensing hydraulik med proportionalstyring af armens bevægelser. En forskydelig kontravægt kan monteres for at give bedre stabilitet. Mineralholder. Slikstensholder i plast til montering på en ubehandlet pæl. Holderen beskytter slikstenen mod vind og vejr. I bunden af beholderen er der fire huller der leder salt og mineralholdig væske ned på pælen. Husdyr og vildt kan slikke på enten pælen eller på selve slikstenen for at optage salt og mineraler. Langtrug af plast til fodring af kalve og lam. Truget kan anvendes både til mælkefodring og kraftfoder. Fodringen kan ske enten individuelt eller fælles, idet der til truget kan leveres op til 7 individuelle mælketrug. Rumindholdet er på 100 l. og truget har en længde på 2 m. Med anvendelse af en foderkumme i stedet for en flad krybbe, sikrer man at dyrene altid kan nå det udlagte foder. Man sparer en arbejdsgang, da arbejdet med at indfeje eller skubbe foderet elimineres med en foderkumme. Med brug at et plast materiale vil dyrene lettere kunne holde foderkumme ren og mere hygiejnisk. Enkelt montage og mulighed for udskiftning af et enkelt kummeelement efter en evt. påkørsel. This is a PC-based control system for the management and control of slurry handling, ventilation and lighting in cattle houses. The system can control gangway scrapers, stirring in the fore tank and pump transference to the slurry container. It is also equipped with a weather station module for the control of blinds and it also has a rain sensor. There is a lighting program for the monitoring and control of the desired lighting level in the cattle house. Artificial light is controlled in relation to available daylight and has automatic regulation to ensure low power consumption. Monitoring is available via internet and smartphone. FM 5500 Hydro can irrigate up to 10 hectares in one set-up with 1,000 metres Ø 125 hard hose – depending on pump pressure and water volume. The machine is mounted on a new heavy-duty chassis which has hydraulic brakes as standard. The machine is propelled by a small 6.5 h.p. diesel engine. This diesel engine operates a hydraulic system which powers the drive of 10 – 80 metres/hour and ensures oil pressure to draw the hydraulic drum traction. The diesel engine means that water pressure is only applied to attain maximum spreading width of the irrigation. Spearhead Twiga SPV1, SPV2 and SPV3 are three models of self-propelled clippers with 11 different shaft lengths of from 8 to 17 metres. Many different implements can be fitted onto the shaft which has a 180 degree pivot joint. John Deere motors from 115 to 173 h.p. provide the traction power and the transmission enables operation in both directions at the same speed. The operator cabin can be turned 90 degrees which ensures that the operator has clear vision direct out to the implement on the shaft. It has Danfoss Load Sensing hydraulics with proportional control of the shaft movements. A sliding counterweight can be installed to provide increased stability. Mineral block holder. This is a plastic lick holder for mounting on an untreated pole. The holder protects the mineral block from wind and weather. There are four holes in the bottom of the holder that lead salts and mineral fluid down the pole. Livestock and game can either lick on the pole or on the actual mineral block. Plastic long trough for feeding calves and lambs. The trough can be applied for both milk feeding and feed concentrates. Feed can be supplied individually or as common feeding because the trough is available with up to 7 individual milk troughs. The content is 100 litres and the trough has a length of 2 meters. By applying a feed bowl instead of a flat crib one ensures that the livestock can always reach the feed and work operations are reduced in that sweeping/pushing the feed together is eliminated. Due to this plastic material the livestock can easily keep the feed bowl clean and thus more hygienic. Simple installation and the facility of being able to replace an individual bowl unit in the event of collision.
Page 1 and 2: Godkendte nyheder og beskrivelser/a
Page 3 and 4: Firma/company Hal Stand Produkt Pro
Page 9: Firma/company Hal Stand Produkt Pro
Page 35: Firma/company Hal Stand Produkt Pro

Se den samlede liste med beskrivelser her - Agromek

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?