Investigation Manual for the Regulated Chemical Substances - Omron

OC. Substance No.
JGPSSI Substance
Group No.
A
071 B06
B
014
A
236 B13
Substance (substance group)
Content standard (Note 12)
Polychlorinated naphthalene (3 or
more chlorines)
Cases of intentional addition
B12 Perchlorate
0.0000006% by weight per surveying unit(0.006ppm)
Perfluorooctane sulfonate (PFOS)
Intentionally added or content of 0.1 wt% in
material
Content flag by
the threshold
level (Y/N)
Rank
RoHS/ELV
exception
use
number
(Note 10)
JGPSSI
intended use
classification
code
Y A ― B06-J-1
N
Uncontrolled
Y B ― B12-J-0
N
Uncontrolled
-24/55-
Intended use and threshold value
(JGPSSI intended use classification)
Cases containing intentionally added polychlorinated
naphthalenes.
Additional standard
(Note 4)
― B06-J-98 Cases containing impurities. ― ―
― B12-J-98
Y C ― B13-J-0
Y C ― B13-J-1
Y A ― B13-J-2
Y A ― B13-J-3
Y A ― B13-J-4
Y A ― B13-J-6
Y A ― B13-J-7
Y A ― B13-J-8
Y A ― B13-J-9
Cases containing above 6 ppb perchlorates by weight
per surveying unit.
Cases containing up to 6 ppb perchlorates by weight
per surveying unit.
Cases of PFOS intentionally added to photoresists for
the photolithography process or during antireflective
coating
Cases of PFOS intentionally added to photo coating
used in printing plates, film, and documents.
Cases of PFOS intentionally added to mist
suppressants used in chrome plating, chrome oxidation ―
processing, and reverse etching.
Cases of PFOS intentionally added to mist
suppressants used in electroless
―
nickel-polytetrafluoroethylene (PTFE) plating.
Cases of PFOS intentionally added to mist
suppressants used in etching of plastic base materials
before metallic coating.
Cases intentionally containing 0.1 wt% or more of
PFOS in homogeneous material as a constituent of
moldings, excluding specified uses of B13-J-0, 1, 2, 3,
and 4; for textiles and other covered materials, cases
intentionally containing above 1 μg/m 2 of PFOS in lag
Cases intentionally containing PFOS, excluding
specified uses (B13-J-0, 1, 2, 3, 4, 6, 8, and 9)
Content of 0.1 wt% or over of PFOS in homogeneous
material as an impurity for cases excluding specified
uses (B13-J-0, 1, 2, 3, 4, 6, 7 and 9)
Content of 0.001 wt% or over of PFOS as a component
of a substance or mixture for cases excluding specified ―
uses (B13-J-0, 1, 2, 3, 4, 6, 7 and 8)
―
― ―
― ―
― ―
― ―
―
―
―
―
Deadline for
prohibition of
its use in
parts, etc.
(Note 2)
Immediately
prohibited
Immediately
prohibited
Immediately
prohibited
Immediately
prohibited
Immediately
prohibited
Immediately
prohibited
Immediately
prohibited
Immediately
prohibited
Major regulations (excluding
RoHS and ELV Directives) and
remarks
Act Concerning the Examination and
Regulation of Manufacture, etc. of
Chemical Substances
California State Perchlorate
Contamination Prevention Act of.
2003, regulation adpted by DTSC
European Commission Regulation No.
757/2010
Canadian Environmental Protection
Act
SOR/ 2008-178;
Act Concerning the Examination and
Regulation of Manufacture, etc. of
Chemical Substances