INSPECTION REPORT (1:2)
INSPECTION REPORT (1:2)
INSPECTION REPORT (1:2)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>INSPECTION</strong> <strong>REPORT</strong> (1:2)<br />
Project:<br />
Site address:<br />
Doc Nr. 1 - maxit Quality Assurance System – Car Park Floor – for mFC<br />
Site manager: Quality supervisor:<br />
Date: Inspected by:<br />
GENERAL CONDITIONS<br />
Products:<br />
Machinery to be used:<br />
Programme for completion<br />
Area: m 2<br />
Thickness: mm<br />
Date Area/activity (defined) m 2<br />
WORKING CONDITIONS<br />
General conditions on site OK Remarks:<br />
Temperature Indoor: º C<br />
Floor: º C<br />
Water availability OK Remarks:<br />
Electricity OK Remarks:<br />
Other remarks:<br />
WORK <strong>INSPECTION</strong><br />
Items to be checked<br />
Quality Manager responsible<br />
MFC:<br />
PREPARATORY WORK /<br />
ASSESSMENT OF CONDITION<br />
- Type of substrate<br />
- Mapping of cracks in sub-floor<br />
- Rising damp<br />
- Absorbed oils/cutting fluids<br />
- Construction joints<br />
- Working joints<br />
- Cracks<br />
- Bonding in sub-floor<br />
- Sub-floor pull-off strength > 1.5 MPa (N/mm 2 )<br />
Check carried out by:<br />
As per signature:<br />
Requirement Date Signature Deviation
- Freshly cast concrete (≥ 28 days)<br />
- Test areas<br />
CLEANING<br />
- Vacuum cleaning<br />
- Shot-blast cleaning<br />
Doc Nr. 1 - maxit Quality Assurance System – Car Park Floor – for mFC
<strong>INSPECTION</strong> <strong>REPORT</strong> (2:2)<br />
Doc Nr. 1 - maxit Quality Assurance System – Car Park Floor – for mFC<br />
SUBSTRATE<br />
- Pull-off strength > 1.5 MPa (N/mm 2 )<br />
- Bonding/de-bonding<br />
- Joints<br />
- Need for fillings<br />
- Temperature > +10 C o<br />
- Curvature/Slope<br />
- Damp/Wetness<br />
SURVEYING FOR FLATNESS<br />
SEALING/EDGES<br />
PRIMING on to SUBSTRATE<br />
Priming: MD16 (Floor 4716) (1:5 and 1:3)<br />
Priming: MD 24 (Floor 4710)<br />
REINFORCEMENT - BOLTED<br />
- Steel net Ø 4 mm, mesh 150 mm<br />
LEVELLING<br />
- Priming between layers 1 and 2<br />
- Foam barriers<br />
- Taping of edges<br />
- Cutting of joints/profiles for<br />
construction joints<br />
- Gradient<br />
SUBSEQUENT ADJUSTMENTS<br />
- Checking flatness/curvature<br />
- Checking surface structure<br />
- Bonding<br />
SURFACE TREATMENT<br />
IMPREGNATION<br />
- Cleaning of surface ABS 410 (Floor<br />
4610) / ABS 430 (Floor 4630)<br />
- 1 st application of impregnation / coating<br />
- 2 nd application of impregnation / coating<br />
FINISHED Car Park FLOOR<br />
- Visual appearance:<br />
- Visual appearance: Overall<br />
- Pull-off strength<br />
- Bonding<br />
DIRECTIONS FOR MAINTENANCE<br />
For deviations see separate Non-Conformity Report
Signature of responsible Quality Manager MFC<br />
Signature of responsible Site Manager<br />
Doc Nr. 1 - maxit Quality Assurance System – Car Park Floor – for mFC<br />
Place, date<br />
Place, date
Doc Nr. 1 - maxit Quality Assurance System – Car Park Floor – for mFC
Change language