HE6… - Фирменный интернет-магазин бытовой техники KAISER

60
Cyclic inspection
EN
Besides the current maintenance, the user should
ensure:
• alternate check and maintenance of oven
elements and assemblies,
• cyclic inspection by the customer service
once in two years after the warranty has
expired.
• Repair of faults.
Note! Care and servicing as well as all kind of
reparations are to be carried out by authorized
personnel only.
IMPORTANT!!!
The user is responsible for good working
order and correct operation of the
appliance. If the customer service is called
because of an operating mistake, the
servicing costs are carried by the user
even if the warranty is still valid.
Damages caused by non-observance of
the given instruction are not approved.
What to do, if?
In case of a damage:
• Switch off all oven operating functions
(cooking zones, oven, light etc.)
• disconnect the appliance from the power
supply
• contact the Customer Centre or another
authorized organisation to order the
servicing.
Some simple faults can be repaired by the user in
correspondence with the recommendations in the
present operating instructions.
Some troubles and faults can occur occasionally
during the usage of the appliance. The user can
repair some of the faults on his or her own by
following the recommendations introduced in the
Table below. Before contacting the customer
service, check the following points consecutively: