DRAFT - Danfoss Heating for consumers
DRAFT - Danfoss Heating for consumers
DRAFT - Danfoss Heating for consumers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
How to navigate?<br />
What do the symbols mean?<br />
<br />
<br />
<br />
Adjust temperatures and values.<br />
Switch between menu lines.<br />
Select / return.<br />
2 sec.<br />
Return to daily user menu.<br />
The desired flow temperature is influenced by <strong>for</strong> example room or return temperature.<br />
The actuator closes the control valve.<br />
The actuator opens the control valve.<br />
The actuator does not activate the valve.<br />
The pump is ON.<br />
The pump is OFF.<br />
The controller is in setback mode.<br />
The controller is in pre-setback mode (the symbol is blinking).<br />
The controller is in com<strong>for</strong>t mode.<br />
The controller is in pre-com<strong>for</strong>t mode (the symbol is blinking).<br />
Safety Note<br />
To avoid injury of persons and damages to the device, it is absolutely necessary to read and<br />
observe these instructions carefully. The warning sign is used to emphasize special conditions<br />
that should be taken into consideration.<br />
This symbol indicates that this particular piece of in<strong>for</strong>mation should be read with<br />
special attention.<br />
VI.KT.G2.02 © <strong>Danfoss</strong> 05/2007 DH-SMT/DK<br />
Disposal Instruction<br />
Equipment containing electrical components shall not be disposed together with<br />
domestic waste.<br />
It must be collected separately with other electrical and electronic waste according to<br />
local legislation.<br />
DH-SMT/DK VI.KT.G2.02 © <strong>Danfoss</strong> 05/2007