DRAFT - Danfoss Heating for consumers
DRAFT - Danfoss Heating for consumers
DRAFT - Danfoss Heating for consumers
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connecting the room panel / remote control<br />
* Connect ECL terminal 9 to 1 and terminal 8 to 2.<br />
The ECA 60 / 61 / 62 / 63 is activated by the setting in line 7010.<br />
The ECA 60 / 61 / 62 / 63 is powered by the ECL BUS which means that the BUS must be active.<br />
The BUS is activated by setting the controller address to 15 (line 7199).<br />
44 VI.KT.G2.02 © <strong>Danfoss</strong> 05/2007 DH-SMT/DK<br />
If the temperature value is displayed as<br />
"- -" the sensor in question is not connected.<br />
"- - -" the sensor is short-circuited.<br />
Select control mode<br />
During scheduled operation (AUTO), the symbols will show you the control mode.<br />
<br />
<br />
Change the mode (AUTO, COMFORT, SETBACK, or STANDBY).<br />
Set your personal schedule<br />
It is only possible to set the personal schedules if the ECL Com<strong>for</strong>t 110 controller has a built-in<br />
ECA 110 timer program.<br />
<br />
<br />
This display will show the current day and time.<br />
Choose the day <strong>for</strong> which you wish to change the settings.<br />
DH-SMT/DK VI.KT.G2.02 © <strong>Danfoss</strong> 05/2007 9
Change language