victrix 50 - RVR.ie

8
VICTRIX 75
VICTRIX 75 is an open chamber fan assisted wall-hung condensing boiler for heating only,
equipped with circulator and safety valve. The boiler is approved for installation in both
indoor heating plants and outside buildings, without requiring additional protection. It can
be installed as single appliance or in cascade.
The generator is equipped with electronic board, allowing to adjust the functioning
parameters of the appliance to the specific exigencies of every single system.
• Nominal heat output of 72 kW;
• Minimum heat output of 18 kW;
• Compact dimensions;
• Stainless steel condensing module;
• 4 bar safety valve with discharge funnel;
• Double NTC probe for optimum temperature control;
• IPX5D protection index;
• Frost protection up to -5°C;
• Control board with visual display;
• Autodiagnosis system;
• Possibility to connect a separate storage tank unit.
Model Height Width Depth
VICTRIX 75 950 mm 600 mm 525 mm
Model
Code
N.G.
L.P.G.
Heat
output
kW
Efficiency
rating
(D.P.R. 660/96)
Condensing/
premixed
burner
Reduced
pollutant emissions
(NOx-CO)
Protection
index
Frost
protection
VICTRIX 75 3.018511 72,6 4 stars IPX5D -5°C
3.018511GPL
MAIN OPTIONS
Type Code
External sensor 3.015266
Three-way valve kit 3.015223
Hydraulic manifold kit 3.015224
MAIN FLUE KITS
Type Code
Terminal horizontal outlet kit Ø 80 3.015255
Terminal vertical outlet kit Ø 80 3.015256
Horizontal concentric kit Ø 80/125 3.015242
For good performance and safe operation use Immergas “Green Series” pipes and terminal flue outlet only.
NEW