Tier 1 Selection Guide - Atlas Copco

7. Tensor S electric nutrunners
Document entire data records
With transducers for safety-critical joints or those
required to be documented. Fantastic performance
(strength, accuracy, ergonomics and reliability)
makes the Tensor S the most frequently used
electric tool in the automotive industry. The latest
model, Tensor S II, has a new angle head for even
greater reliability. The tool also has a new ergonomic
motor sleeve.
7.1 Angle nutrunners
Square drive Torque Speed Weight Length CS distance
Model in Nm ft lb r/min kg lb mm mm Ordering No.
ETV S42
S42-05-06 1/4 1-6 0.7-3.6 1232 1.5 3.3 381 11 8433 1236 26
S42-10-06 1/4 3-15 2.2-11 798 1.5 3.3 381 11 8433 1236 51
S42-20-10 3/8 4-25 2.9-18.3 447 1.5 3.3 382 13.5 8433 1236 91
S42-30-10 3/8 6-35 4.4-27.7 268 1.6 3.5 384 15.5 8433 1237 04
ETV S42 Ball Retainer
S42-10-B06 3/8 3-15 2.2-11 798 1.5 3.3 381 11 8433 1236 62
ETV S72
S72-28-10 3/8 5-29 4-21 1305 1.6 3.5 413 13.5 8433 1245 20
S72-30-10 3/8 6-35 5-25 893 1.6 3.5 415 15.5 8433 1247 33
S72-40-10 3/8 8-40 6-29 887 1.7 3.7 435 18 8433 1250 00
S72-50-10 3/8 10-55 7-40 533 1.9 4.2 435 18 8433 1252 87
S72-70-13 1/2 14-80 10-58 384 2.2 4.8 461 20 8433 1273 09
ETV S72 Ball Retainer
S72-28-B10 3/8 5-29 4-21 1305 1.6 3.5 413 13.5 8433 1245 23
S72-30-B10 3/8 6-35 5-25 893 1.6 3.5 415 15.5 8433 1247 35
S72-40-B10 3/8 8-40 6-29 887 1.7 3.7 435 18 8433 1250 42
S72-50-B10 3/8 10-55 7-40 533 1.9 4.2 435 18 8433 1252 62
S72-70-B13
ETV S92
1/2 14-80 10-58 384 2.2 4.8 461 20 8433 1273 44
S92-50-13 1/2 15-55 10.8-36 1147 4.2 9.2 552 20 8433 1349 47
S92-70-13 1/2 30-80 22-58 966 4.3 9.4 552 20 8433 1350 03
Dimensional drawings of the listed tools can be found on our website
15