CodeWarrior Development Studio for Power Architecture ...

Trace
Configuration
10. In the left pane of the Trace Configurations dialog box, select RCPM from the P4080 tree control.
The RCPM configurations page appears in the right pane of the dialog box (Figure 2.22).
Figure 2.22 RCPM Configuration Page
a. To enable RCPM triggering, check Enable RCPM Triggering.
The RCPM configuration options are enabled. RCPM passes signals between the cores and the
rest of the chip.
b. Click the Core Groups tab.
The core group configuration options appear. You can use these options to create groups of cores
that can be signaled together.
c. Check the checkboxes for the required core corresponding to a core group.
NOTE For more information on Core Masks, refer to the Core Group Configuration Registers 0–7
(CGCRn) topic in the P4080 Debug Reference Manual.
d. Click Apply to save the settings.
e. Click the EPU Events (0-3), EPU Events (4-7), EPU Events (8-11), EPU Events (12-15) tabs.
The EPU event configuration options appear (Figure 2.23). These options enable EPU events to
trigger actions in the cores. EPU processes the events that can be sent to different units on the
chip, including the RCPM.
38 Tracing and Analysis Tools User Guide