You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 - The PatchMix DSP Mixer<br />
Mixer Strip Creation<br />
The Insert Menu<br />
Right-Clicking over the insert section brings up a popup<br />
selection box containing various insert options.<br />
To Add a Send Insert:<br />
This type of insert send splits the signal at the insert<br />
point and sends it out to the selected destination.<br />
1. Right-Click over the Insert section. A pop-up<br />
dialog box appears.<br />
2. Select “Insert Send (to ASIO or other)” from the<br />
list of options. The following dialog box appears.<br />
Insert<br />
Send<br />
3. Choose one of the Send Outputs. Click on a destination to select it.<br />
4. Click OK to select the output or Cancel to cancel the operation.<br />
To Add a Send/Return Insert:<br />
This type of insert send breaks the signal at the insert point and sends it out to the<br />
selected destination such as an external effect processor. A return source signal is also<br />
selected which returns the signal to the channel strip after processing.<br />
1. Right-Click over the Insert section. A pop-up dialog box appears.<br />
2. Select “Insert Send/Return” from the list of options. The following dialog box<br />
appears.<br />
Insert<br />
Send/Return<br />
Input<br />
Panning<br />
3. Choose one of the Send Outputs. Click on a destination to select it.<br />
4. Choose one of the Return Inputs. Click on a source to select it.<br />
5. Click OK to select the Send and Return or Cancel to cancel the operation.<br />
18 <strong>Creative</strong> Professional<br />
Fader<br />
Aux 1 Bus<br />
Aux 2 Bus<br />
Main Output Bus<br />
Input<br />
Panning<br />
Fader<br />
Aux 1 Bus<br />
Aux 2 Bus<br />
Main Output Bus<br />
To ASIO, WAV or<br />
Physical Output<br />
To Physical Output<br />
From Physical Input