Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4 - The PatchMix DSP Mixer<br />
Mixer Strip Creation<br />
Pre or Post Fader Aux Sends<br />
When you create a New Mixer Strip you have the option to place both Aux Sends after<br />
the channel volume fader and mute control or you can place them before the fader and<br />
mute. Post-Fader turns down the send level as you lower the volume of the strip. With<br />
Pre-Fader selected, you may still hear the effected signal returning from one of the Aux<br />
Buses with the volume fader turned down.<br />
With the Pre-Fader box selected, the Aux Send levels are completely unaffected by the<br />
Level Fader and Mute settings. The Pre-Fader setting allows you to create two completely<br />
different mixes using the Aux Buses since the signal levels of this mix won’t be affected<br />
by the fader settings.<br />
Pan<br />
Fader<br />
Pan<br />
Fader<br />
Mute<br />
Input<br />
Amt<br />
Amt<br />
Input<br />
Mute<br />
Amt<br />
Amt<br />
Send<br />
Amount<br />
Aux Bus 1<br />
Send<br />
Amount<br />
Aux Bus 2<br />
Send<br />
Amount<br />
Aux Bus 1<br />
Send<br />
Amount<br />
Aux Bus 2<br />
Side<br />
Chain<br />
Main / Monitor Bus<br />
Side<br />
Chain<br />
Side<br />
Chain<br />
Main / Monitor Bus<br />
Pre-Fader Aux Send<br />
Volume Fader & Mute does NOT affect Send Levels<br />
Side<br />
Chain<br />
Return<br />
Amount<br />
Return<br />
Amount<br />
Post-Fader Aux Send<br />
Return<br />
Amount<br />
Return<br />
Amount<br />
Output<br />
Volume Fader & Mute affects both Aux Send Levels<br />
Output<br />
In order to change a<br />
strip from pre-fader to<br />
post-fader or vice-versa,<br />
you have to delete the<br />
strip and create a new<br />
one.<br />
24 <strong>Creative</strong> Professional