swimming pool 2012 - SIBO

PUMPS
SWIMMING POOL 2012 LEVEL ADJUSTERS & ELECTRIC PARTS
LEVEL ADJUSTERS & ELECTRIC PARTS
TS
FLOAT SWITCH code 721
For the usage of filling and draining. Equipped with neoprene cable. *Ask for availability.
July 2012
TYPE ARTNR. EURO MAX. VOLTAGE
3 metres RD236 39,85 10 amp. 230 V
5 metres RD237 46,10 10 amp. 230 V
10 metres RD238 60,05 10 amp. 230 V
Separate plug RD233 14,25 - -
* Cable weight 400gr. RD234 14,15 - -
Cable weight 200gr. RD235 5,35 - -
ELECTRIC LEVEL SWITCH code 721
No moving parts means less interference! LED indication for on/off and water detection. Switches
on at 13 cm height (vertical installation) and off at 1 cm. Can be used horizontal to switch between
3 and 0,5 cm. Controls pumps with a maximum power up to 1 HP. 10 metre H07RNF cable with
plug outlet. Fully submersible. Fits all pumps. Suitable for dirty water. Can be used in liquids up to
50°C. Size: 270 x 80 x 35 mm..
TYPE ART.NR EURO COLOR
Electric level switch for EMPTYING RD255 104,00 Red
Electric level switch for FILLING RD256 108,00 Orange
LEVEL LIMIT SWITCH COMPACT code 721
Very compact level switch for the filling up of, for instance, barrels, tanks, fish
tanks and ponds. The switch can be assembled directly into a hole of 22 mm
that is being sealed with the silicon ring. Level detection by means of a hinging
sensor contact. Switches at a level of approximately 5 mm level difference.
Material: polypropylene, connector cable 50 cm, max. temperature up to 100ºC,
max. pressure 6 bar, max. 40 watt, 1 ampere, 230 volt. Can be used directly on
the water supply with 24volt solenoid valve and 24 volts transformer (order
separately). In this configuration the floater has to hinge upward, as shown on
the picture.
TYPE ART.NR EURO CODE
Compact P520 RD252 17,55 721
Solenoid valve ¾” female ND624 25,65 648
24VAC transformer NL115 24,30 669
LEVEL LIMIT SWITCH IMM code 721
Very compact level switch for the filling up of i.e. barrels, tanks,
fish tanks & ponds. Level detection by means of relay switch with
Stainless Steel pin and NBR floater. Stainless Steel pin can be
shortened between 10 and 50 cm. Switches at a level difference
of 5 mm. Max. temperature up to 80ºC, flange connector maximum
60 watt, 1 ampere, 230 volt. Can be used directly on the water supply
with a 24 volt solenoid valve (order separately) and a 24 volt transformer
(in this configuration, connect contacts 2 and 3).
TYPE ART.NR EURO CODE
IMM RD254 69,10 721
Solenoid valve ¾” female ND624 25,65 648
24VAC transformator NL115 24,30 669
39
Retail prices excl. VAT