You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
General control<br />
MEMORY<br />
■ To turn the power on<br />
Press the ON/STAND-BY button to turn the power on.<br />
The first time power is supplied to the unit, the clock will be<br />
blinking on the display. Please set the time and date<br />
(refer page 11).<br />
After use:<br />
Press and hold the ON/STAND-BY button to enter the power<br />
stand-by mode.<br />
■ Display brightness control (DIMMER)<br />
<strong>DK</strong>-<strong>CL3P</strong><br />
ENGLISH<br />
Press the SNOOZE/DIMMER button to adjust the brightness of<br />
LCD display.<br />
Dimmer 1 (Display is dim)<br />
Dimmer 2 (Display gets dimmer)<br />
Dimmer off (Display is bright)<br />
Notes:<br />
● Setting dimmer to display in the brightest mode during battery<br />
operation will affect battery life.<br />
● During battery operation in standby mode, the brightness of<br />
the display will automatically go to the lowest mode (dim OFF)<br />
after 5 seconds.<br />
■ Volume auto set in<br />
If you turn off and on the main unit with the volume set to 17 or<br />
higher, the volume starts at 16.<br />
■ Volume control<br />
Press the VOLUME (+ or –) button<br />
to increase or decrease the volume.<br />
Volume indicator will be blinking<br />
when volume reaches maximum<br />
and minimum level.<br />
MON<br />
Basic <strong>Operation</strong><br />
E-10