DK-CL3P Operation Manual

Maintenance
■ Cleaning the unit
Periodically wipe the unit with a clean soft cloth.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes for
product improvement without prior notice. The performance
specification figures indicated are nominal values of production
units. There may be some deviations from these values in
individual units.
■ General
Power source DC IN 5.9V 2A: AC/DC adaptor
(AC 100 - 240 V ~ 50/60 Hz)
6V (UM-3/SUM-3, R6/AA) x 4
Power
consumption
11 W
Output power Front speakers:
0.6 W watts minimum RMS per channel
into 8 ohms from 100 Hz to 20 kHz, 10%
total harmonic distortion.
Caution:
● Do not use chemicals for cleaning (gasoline, paint thinner,
etc.). It may damage the unit finishing.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
Speaker 1-way type speaker system
2.5" (6.5 cm) Full Range
Speaker maximum 1.2 W/Channel
input power
Speaker rated
input power
■ Tuner
0.6 W/Channel
Output terminals Video output: 1Vp-p
Input terminals Auxiliary (audio signal):
500 mV/47 k ohms
Dimensions Width: 4" (100 mm)
Height: 33/4" (96.2 mm)
Depth: 45/14" (110 mm)
Weight 0.77 lbs. (0.35 kg)
Frequency range FM: 87.5 - 108.0 MHz
DK-CL3P
ENGLISH
References
E-20