TASKI Jontec TimeSaver Ultra High Performance Floor Emulsion
TASKI Jontec TimeSaver Ultra High Performance Floor Emulsion
TASKI Jontec TimeSaver Ultra High Performance Floor Emulsion
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TASKI</strong> <strong>Jontec</strong> <strong>TimeSaver</strong><br />
Use instructions<br />
Dosage: Ready to use. Apply undiluted.<br />
Application:<br />
Preparation: Strip the floor with a JohnsonDiversey floor stripper, rinse thoroughly and allow the floor to fully dry.<br />
Using <strong>Jontec</strong> ProStrip (and <strong>Jontec</strong> LinoSafe L on linoleum) is strongly recommended for maximum efficiency.<br />
The use of other floor strippers will require considerably more efforts and time.<br />
Application: Sparingly pour product onto the floor and evenly spread it while still wet with a polish applicator in<br />
overlapping lanes of 1-1.5m. Allow to dry completely (20-30 minutes) before applying additional coats in similar<br />
manner. The white appearance of <strong>Jontec</strong> <strong>TimeSaver</strong> during application allows you to visually locate and avoid<br />
missed spots. Application marks will disappear when drying. Two coats will usually be sufficient on most types of<br />
floors. On non-homogenous floors (e.g. Stone, Terrazzo, Linoleum) apply one coat of an appropriate sealer prior<br />
to application of <strong>Jontec</strong><strong>TimeSaver</strong>. It is recommended to allow the protection to cure 24 hours and then dry buff<br />
the floor once in order to densify the film and improve the slip resistance of the protection.<br />
Top stripping and recoating: In order to extend lifetime of the protection, a top stripping and recoating using only<br />
1 coat of <strong>Jontec</strong> <strong>TimeSaver</strong> will allow you to gather additional months of protection. Use one of the<br />
JohnsonDiversey’s floor top strippers to remove one coat of polish, allow drying completely and apply one coat<br />
of <strong>Jontec</strong> <strong>TimeSaver</strong>. Your protection will look again like new! This allows you to extend the periods between<br />
full stripping operations.<br />
Technical data<br />
• Appearance: cloudy, white liquid<br />
• Relative density [20°C]: 1.04<br />
• pH-value neat: 7.5 - 8.0<br />
Safe handling and storage information<br />
Safe handling:<br />
Full guidance on the handling and disposal of this product is provided in a separate Material Safety Data Sheet.<br />
Only for professional users / specialists.<br />
Storage Information:<br />
Store in original closed containers and do not store at temperatures below 5°C<br />
Approvals<br />
Tested according to ASTM D-2047 for slip resistance<br />
JohnsonDiversey European<br />
Headquarters, WTC Amsterdam<br />
Airport, Tower B, 8th <strong>Floor</strong> Schipol<br />
Boulevard 209, Luchthaven Schipol, The<br />
Netherlands 1118 BH<br />
www.johnsondiversey.com<br />
P92560XFEN-02 © Copyright 2006 JohnsonDiversey 2
Change language