Electrogas Welding (EGW) - College of Eastern Utah

ePAPER READ

DOWNLOAD ePAPER

eastern.usu.edu

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

START NOW

Angular Distortion & Stress

Angular distortion (the “gull wing” shape of a

SMAW certification plate) is minimal for EGW

when a symmetrical joint is used.

Solidification begins at the outside edges.

The result is that the outer surfaces of the

completed weld are in compression and the

center is in tension.

On-Line Career Exploration - College of Eastern Utah

INTRODUCTION - College of Eastern Utah - Utah State University

Oxy-Fuel Gas Welding (OFW) – USU Eastern

Public Employees Health Program, FLEX$ - USU Eastern

weld 1100 - shielded metal arc welding - College of Eastern Utah

Residence Halls Schedule of Rates 2012 - 2013

Metallurgical Concerns Since EGW is a high heat-input process where a large molten puddle is used, the cooling rate is very slow. This condition results in large (course), columnar grains in the weld zone and a wide heat affected zone (HAZ). Course grained microstructures typically lack toughness (resistance to fracture).

Angular Distortion & Stress Angular distortion (the “gull wing” shape of a SMAW certification plate) is minimal for EGW when a symmetrical joint is used. Solidification begins at the outside edges. The result is that the outer surfaces of the completed weld are in compression and the center is in tension.

Page 1 and 2: Electrogas Welding (EGW) WELD 1140
Page 3 and 4: EGW Interesting Facts Electroslag
Page 5 and 6: EGW A consumable guide is often us
Page 7: EGW Joint designs: see fig. 7.6 an
Page 11: Discontinuities Porosity Ceterlin

Electrogas Welding (EGW) - College of Eastern Utah

Create successful ePaper yourself

Delete template?

Save as template?