Loudspeakers - Dynacord

PSD 215 AND PSD 218
DSP BLOCK DIAGRAM
80
The integrated 24-bit digital controller with internal
48-bit double-precision resolution exhibits a 1-into-3
topology: SUB channel, TOP channel and an additional
DSP Out.
The stored factory presets are optimized for
combinations with TS 400, Corus 12“ and 15“, CXM
15, D-Lite 12-3 and 15-3, as well as VariLine fullrange
cabinets and generic presets for other
combinations and special programs for cardioid and
bass arrays are also provided.
The system-alignment-delay, the polarity and naturally
also the level can be edited by the user. The input
EQ, the settings of which can be saved, allows adjustments
to be made for the acoustics of the room.
The DSP Out also offers an adjustable delay, low-cut
and shelving equalizer as well as a level control. It
is therefore ideally adapted, among other things, to
the use of an active delay box. Signal generators with
pink noise or spike pulses are integrated to facilitate
tuning the PA and the setting of delay times. In all, 25
program locations are provided (20 factory presets
+ 5 user memories). All three channels are equipped
with state-of-the-art look-ahead peak anticipation
limiters, the SUB channel also has a temp limiter.