Loudspeakers - Dynacord
Loudspeakers - Dynacord
Loudspeakers - Dynacord
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
XA 2 SYSTEMS<br />
OPTIMIZED FACTORY PRESETS INCLUDING FIR-TUNE R-TUNE LINEARIZATION ARE<br />
AVAILABLE FOR DSP 600, P 64 AND PowerH AMPLIFIERS WITH RCM-26<br />
UNDER IRIS-NET.<br />
problematic and complex rigging<br />
requirements simply and safely. To<br />
adapt to a multitude of very different<br />
sound reinforcement tasks and<br />
venue acoustics of all descriptions,<br />
the requisite Xa 2 components can<br />
be confi gured swiftly and simply<br />
without any need for complex<br />
calculations, controller adjustments<br />
or programming of limiters. If at<br />
an open-air event extreme sound<br />
pressure levels are required in the<br />
sub-bass, one sub per side can be<br />
added. If the brass brand playing in<br />
a marquee needs extremely broad<br />
coverage and fewer subs, a single<br />
subwoofer but two angled tops<br />
per side should fi t the bill. And if a<br />
Top 40 band suddenly fi nds itself<br />
with an audience 4,000 strong, the<br />
same system amp is also capable of<br />
driving three subs plus two tops as<br />
well as additional front- or side-fi lls<br />
without any diffi culty.<br />
95