Selection guide – Downlights

PHL-H4.QXD 09-03-2004 17:21 Pagina 4.6
Downlights Fugato Compact
General lighting
FBS261 WH
Dimensions in mm
FBS261/263
4.6
DOWNLIGHTS
127
Ø 154
Ø 192
236
~FBR601~Odyssey 100
Fugato Compact – FBS261 – FBS263
Fugato Compact is a range of fixed recessed downlights with highly
efficient optics intended for general applications.This platform, which
has a 175 mm cut-out, is meant for general lighting with compact
fluorescent lamps.The lamp portfolio consists of MASTER PL-C and
PL-T lamps. Within the Compact platform, fixed and adjustable
versions for discharge and halogen lamps can also be selected.
Optical variation in Compact CFL (FBS261) is offered by means of
Fugato’s ‘dual optic’ concept.The top optic is made of high-gloss
aluminium.The lower polymer optic can be ordered in a high-gloss,
mat-satin or white finish.The high-gloss (C) version complies with
the UGRR19 norm (in accordance with EN12464-1,
Lm < 1 000 cd/m 2 at γ > 65°). when used with the innovative round
louver. In the Fugato concept there is a seamless transition from the
lower optic to the rim, rendering a clean visual articulation of the
luminaire when installed in the ceiling.
As well as being offered in the dual-optic version (with optical
variation in the lower optic), the low-height version is also available
in a fully metallised polymer version (FBS263).This single-optic
downlight, with a similar cut-out, has lower optical qualities, fewer
accessories and a more limited choice of lamps.
Emergency lighting (EL3 and EL1) is offered for PL-C lamps (one
lamp maintained for 3 hours/1 hour respectively).
Lamps, gear and accessories are delivered with the luminaire.
Decorative accessories will be delivered separately.
Applications
• Office spaces
• Public buildings
• Department stores, fashion shops
• Discount stores, hyper-/supermarkets, do-it-yourself shops
Technical description
• Power supply: 230 V and 240 V
• Gear: conventional compensated (IC), HF-Performer (HF-P),
HF-Regulator (HF-R) and HF-Dali (HF-D). HF-TouchDim is
available upon request.
• Gearbox remote from luminaire
• Prepared for through-wiring
• Lamp position: horizontal
• Materials: die-cast aluminium top reflector, stainless-steel mounting
frame, polycarbonate lamp holder box and lower optic; fully
metallised polymer version (FBS263) made of polycarbonate
• Colour of the rim: white (RAL 9010) and (light) grey
Installation
• Cut-out: ø 175 mm.
• Mounting: install mounting frame, make electrical connection and
place optical unit into mounting frame. Luminaire including lamp
and accessory can be installed directly into the ceiling.
• Protection foil is optional for PL-C versions.
• Thickness of false ceiling: 1 - 24 mm.
• Maintenance: optics are open (FBS261) or closed (FBS263) on
top side; access from below for lamp replacement.
Accessories
Round louvre, glasses and decorative accessories (see page 4.23 for
complete overview).