Error Messages

Chapter 1: Layer 3 Access Control List (ACL) Error Messages
port in Destination flow mode would produce a flow block with only the Destination and Source IP
addresses.
Recommended Action:
Cannot change port mode to Host Flow based mode if a service ACL is present in the system. The
ACL could be detached from the services if the port needs to be in Host Flow based mode.
%ACL-E-HSTFLMODINCOM ACL %s has incompatible rules for Host
Flow based routing.
Explanation:
The user is trying to set the port to Host Flow based routing mode which is not compatible with the
ACL associated with the port. The ACL might be having rules on Scr Port or Destination Port, all
of which in the packet will not be considered if the port is in Host Blow based mode.
Recommended Action:
Find out the ACL that is causing the conflict and detach it from the port and try again.
%ACL-E-INCOMPATIBLE ACL %s has incompatible rules for
Destination based routing.
Explanation:
The user is trying to set the port to Destination Based routing mode which is not compatible with
the ACL associated with the port. The ACL might be having rules on Source IP Src Port, or
Destination Port, all of which in the packet will not be considered if the port is in Destination based
mode.
Recommended Action:
Find out the ACL that is causing the conflict ant detach it from the port and try again.
%ACL-E-IFNOTFOUND : no such interface.
Explanation:
The user is trying to apply an ACL to a non-existent interface.
Recommended Action:
Create the interface first before applying the ACL.
Enterasys Xpedition Error Reference Manual 5