Error Messages

Recommended Action:
Contact Enterasys Technical Support.
%ATM-E-NOVPLFOUND
Explanation:
You use an incorrect VPL value.
Recommended Action:
Specify a VPL that has already been created.
%ATM-E-NOVCLFOUND
Explanation:
You use an incorrect VCL value.
Recommended Action:
Specify a VCL that has already been created.
%ATM-E-NI_XMT_Q_FULL
Explanation:
Could not transmit control packet, NI transmit queue is full.
Recommended Action:
If problem persists, contact customer support.
%ATM-E-NOAVAILBW
Chapter 4: ATM Error Messages
Explanation:
You are attempting to use more bandwidth than is available on the link. Note that CBR traffic
cannot use 100% of the bandwidth, since some must be reserved for other critical traffic.
Recommended Action:
Use less bandwidth.
Enterasys Xpedition Error Reference Manual 27