2011 Spicer Steer Axles Service Manual
2011 Spicer Steer Axles Service Manual
2011 Spicer Steer Axles Service Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
16. Seat draw key with a hammer and punch.<br />
1 - Draw key<br />
2 - Brass hammer<br />
17. Install draw key nut and tighten. Refer to torque<br />
charts in Appendix.<br />
1 - Draw key nut<br />
18. Ensure draw key is fully seated by repeating step 16<br />
and 17. Recheck draw key nut torque.<br />
19. Install kingpin caps. Tighten caps. Refer to torque<br />
charts in Appendix.<br />
Note: Tighten nut to range minimum in steps 17 and 19, then<br />
tighten just enough to align cotter pin hole.<br />
20. Attach drag link to steering arm. Install and torque<br />
nut to vehicle manufacturer recommended torque.<br />
21. Install cotter pin.<br />
1<br />
1<br />
2<br />
Disassembly, Overhaul, and<br />
Assembly<br />
22. Attach tie rod end to tie rod arm on knuckle. Install<br />
nut and tighten. Refer to torque charts in Appendix.<br />
23. Install cotter pin.<br />
24. Grease all kingpin and tie rod assemblies.<br />
25<br />
Disassembly, Overhaul,<br />
and Assembly
Change language