Sym Attila RS-21 EFI150 (HE15W) servicemanual - Scootergrisen
Sym Attila RS-21 EFI150 (HE15W) servicemanual - Scootergrisen
Sym Attila RS-21 EFI150 (HE15W) servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
13. Brake<br />
Brake Disc<br />
Inspection<br />
Visually check the brake disc for wear or break.<br />
Measure the thickness of the disc at several<br />
places. Replace the disc if it has exceeded the<br />
service limit.<br />
Allowable limit: 2.0 mm<br />
Remove the brake disc from wheel.<br />
Check the disc for deformation and bend.<br />
Allowable limit: 0.30 mm<br />
13-8<br />
CAUTION<br />
• Do not let grease touch to the brake disc<br />
that will cause brake performance.<br />
• Do not clean the brake lining with air gun<br />
because the lining is contained asbestos.<br />
Operator should wear mask & glove and<br />
use vacuum cleaner to clean the brake<br />
lining.<br />
Brake Master Cylinder<br />
Removal<br />
CAUTION<br />
Do not let foreign materials enter into the<br />
cylinder.<br />
CAUTION<br />
The whole set of master cylinder, piston,<br />
spring, diaphragm and clip should be<br />
replaced after removal.<br />
Remove the front and rear handlebar guards.<br />
Remove the leads of brake lamp switch.<br />
Drain out the brake fluid.<br />
Remove the brake lever from the brake master<br />
cylinder.<br />
Remove the brake hose.<br />
Remove the master cylinder seat and the master<br />
cylinder.<br />
Remove the rubber pad.<br />
Remove the clip.<br />
Remove the piston and the spring.<br />
Clean the master cylinder with recommended<br />
brake fluid.<br />
This Chapter Contents<br />
Brake<br />
disc<br />
Rubber<br />
washer<br />
Piston<br />
Spring<br />
Brake<br />
hose<br />
Clip<br />
Master<br />
cylinder<br />
Micrometer<br />
Master<br />
cylinder
Change language