Sym Attila RS-21 EFI150 (HE15W) servicemanual - Scootergrisen
Sym Attila RS-21 EFI150 (HE15W) servicemanual - Scootergrisen
Sym Attila RS-21 EFI150 (HE15W) servicemanual - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Removal Of Engine Suspension<br />
Bushing<br />
If engine suspension frame and the cushion<br />
rubber of rear shock absorber bushing damaged.<br />
Then, with the bushing remover / pressor,<br />
Ø 28mm & Ø 20mm, to press the bushing out,<br />
and replace it with new one.<br />
Engine suspension bushing: Ø 28mm<br />
Rear shock absorber bushing: Ø 20mm<br />
Pressing out<br />
Place the detent section of the bushing remover<br />
toward the bushing, and drive both the pressing<br />
ring and bolt in to press the bushing out.<br />
Pressing In<br />
Place the flat section of the remover toward the<br />
bushing, and then drive the bushing, pressing<br />
ring, and bolt in to install the bushing.<br />
This chapter Contents<br />
5. REMOVAL OF ENGINE<br />
5-7
Change language