TCP/IP Connectivity Utilities for i5/OS commands - IBM
TCP/IP Connectivity Utilities for i5/OS commands - IBM
TCP/IP Connectivity Utilities for i5/OS commands - IBM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Examples<br />
Example 1: Setting an Inactivity Timeout<br />
CHGPOPA INACTTIMO(700)<br />
This command sets the time of 700 seconds that the POP server will wait be<strong>for</strong>e assuming the client has<br />
stopped communicating. After this time the server will disconnect from the client. No mail will be<br />
deleted.<br />
Example 2: Setting a Default CCSID<br />
CHGPOPA MIMECCSID(923 *BESTFIT)<br />
This command sets the CCSID 923 to be used <strong>for</strong> conversions, if the CCSID cannot be determined from<br />
the mail. This CCSID contains the Euro character.<br />
Example 3: Setting an Allow Secure Socket Layer<br />
CHGPOPA ALWSSL(*ONLY)<br />
This command sets the POP server to use only secure communication between the client and server.<br />
Error messages<br />
*ESCAPE Messages<br />
<strong>TCP</strong>499A<br />
Error accessing configuration member.<br />
<strong>TCP</strong>4993<br />
CCSID parameter value &1 not valid.<br />
<strong>TCP</strong>4994<br />
CCSID parameter value &1 not found.<br />
<strong>TCP</strong>8050<br />
*I<strong>OS</strong>YSCFG authority required to use &1.<br />
<strong>TCP</strong>9503<br />
File &3 in library &2 not available.<br />
Top<br />
Top<br />
Change POP Server Attributes (CHGPOPA) 31
Change language