TCP/IP Connectivity Utilities for i5/OS commands - IBM

*SAME
The number of hours between retries that was previously set does not change; otherwise, 0 is
used.
*DFT The number of hours between retries is set to the default of 0 minutes.
0-99 Specify the number of hours between retries. If the number of retries is set, the time interval must
be something other than 0.
Retry remote name server (RTYRMTSVR)
Specifies whether SMTP should retry contacting the remote name server when attempts to contact it are
unsuccessful. The RTYMIN and RTYHOUR/RTYDAY parameters are used to determine the frequency of
retries.
*SAME
The value for the RTYRMTSVR parameter that was previously set does not change; otherwise,
*NO is used.
*YES Try to contact the remote name server again.
*NO Do not attempt to contact the remote name server again.
Automatic registration (AUTOADD)
Specifies, for incoming mail, whether the remote user ID and address are automatically added to the
system directory and, if necessary, to an alias table. This enables the local user to respond to the mail
without first entering the necessary data into the directory and the alias table.
*SAME
The automatic registration value that was previously set does not change; otherwise, *NO is used.
*NO Do not automatically add remote users into the system directory and the alias table.
*YES Automatically add remote users into the system directory and the alias table.
User ID prefix (USRIDPFX)
Specifies the 3-character prefix that is to be used with the generated 5-digit number that together make
up the SNADS user ID. The SNADS user ID is automatically added to the system directory and the alias
table. This parameter takes effect only if the AUTOADD parameter is set to *YES.
*SAME
The user ID prefix value that was previously set does not change; otherwise, QSM is used.
*DFT The 3-character user ID prefix is set to the default of QSM.
communications-name
Specify the 3-character user ID prefix to be used.
Top
Top
Top
Top
Change SMTP Attributes (CHGSMTPA) 41