LEDmin MKII-5 sm_com_0511 1 - Pintsch Aben
LEDmin MKII-5 sm_com_0511 1 - Pintsch Aben
LEDmin MKII-5 sm_com_0511 1 - Pintsch Aben
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LED 5-Nautical-Mile-Beacon<br />
<strong>LEDmin</strong> <strong>MKII</strong> - 5 <strong>sm</strong><br />
The PINTSCH BAMAG LED 5-Nautical-Mile beacon of the type<br />
<strong>LEDmin</strong> <strong>MKII</strong> – 5<strong>sm</strong> is intended for operation in rough maritime<br />
environments. The LED technology <strong>com</strong>bines low power<br />
consumption with high light output and long service life and<br />
guarantees long maintenance intervals.<br />
The <strong>LEDmin</strong> <strong>MKII</strong> – 5<strong>sm</strong> is used for the marking of Offshore-Wind<br />
parks.<br />
The <strong>LEDmin</strong> <strong>MKII</strong> – 5<strong>sm</strong> fulfils the requirements “Richtlinie für die<br />
Gestaltung, Kennzeichnung und Betrieb von Windenergieanlagen,<br />
WSD Nord und Nordwest“.<br />
To constrict the horizontal light distribution to a definite sector it is<br />
possible to choose the beacon with a cover for the requested sector<br />
(i.E. 184°, 139°, 124° or customizable).<br />
© 2011 PINTSCH ABEN B.V. • Phone +49 (0) 2064 / 602-252 • Phone +31 (0) 346 / 58 39 58 • info@pintschaben.<strong>com</strong><br />
Part-Number<br />
008 231 64X 618<br />
©Picture: Offshore-beneficence/Jan Oelker<br />
Application<br />
Marine lantern for the marking of<br />
Offshore wind parks .<br />
• Operating life of the LED’s up to<br />
100,000 h<br />
• Monitoring of the LED’s<br />
• Failure output : Lantern defective<br />
• Operating output : Light ON<br />
• Light synchronization by digital signal<br />
(z.B. radio, GPS, etc.)<br />
• Control input : Light ON<br />
• Adjustable daylight switch<br />
• Programming via IR remote control<br />
or PB-Bus Interface (PC, CoDeSy<br />
<strong>MKII</strong> RTU, etc.)<br />
• Seawater resistant aluminum<br />
housing (AIMg-Si), coated<br />
• Lens is made from UV-resistant and<br />
sturdy polycarbonate<br />
• Termination via open cable head<br />
<strong>LEDmin</strong> <strong>MKII</strong>-5<strong>sm</strong> (05/11 GB)<br />
www.pintschaben.<strong>com</strong><br />
1
LED 5-Nautical-Mile-Beacon<br />
<strong>LEDmin</strong> <strong>MKII</strong> – 5 <strong>sm</strong><br />
Technical data<br />
Operating voltage: 12 / 24 V DC , reverse-polarity protected<br />
Input voltage range: 10 - 30 V DC<br />
Average power consumption: approx. 6 W<br />
Quiescent current: