ROHR2 31.0 Feature list
ROHR2 31.0 Feature list
ROHR2 31.0 Feature list
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ROHR2</strong> <strong>Feature</strong> <strong>list</strong><br />
Page 8<br />
Additional results<br />
Besides the analysis of stresses and loads at support and connections, <strong>ROHR2</strong> gives out, among others, the results<br />
of:<br />
• Expansion joint analysis<br />
• Internal pressure design<br />
• Spring design<br />
Expansion Joints<br />
Database with lateral, angular and axial exp. joints<br />
• data input by data base or user defined<br />
• spring rates are calculated automatically using<br />
the manufacturers data<br />
• forces due to internal pressure are considered automatically<br />
• check of allowable movements for all load cases<br />
• data sheet with detailed results for any exp. joint<br />
Internal pressure analysis (only for DIN/EN materials)<br />
• Pipes<br />
• Bends<br />
• Tees with or without reinforcing pad<br />
Spring design<br />
Database with spring supports according<br />
to manufacturer’s data<br />
• spring design, estimation<br />
• check of allowable movements<br />
for all load cases and<br />
for load case superpositions<br />
• data sheet with result overview for<br />
all spring and constant supports<br />
Definition of spring support,<br />
Calculation with given spring data or auto spring design<br />
<strong>ROHR2</strong>_<strong>Feature</strong><strong>list</strong><br />
SIGMA Ingenieurgesellschaft mbH www.rohr2.com
Change language