ROHR2 31.0 Feature list

ROHR2 Feature list
Page 12
1.5 Integrated Interfaces
CAD Interfaces
Several interfaces for the data import and export are part of the "standard" ROHR2 program
The basis of the ROHR2 CAD Interfaces is the Neutral CAD Interface ROHR2
The Neutral CAD Interface enables
• direct data import from CAD and plant engineering systems like PDMS, CADISON,
RC-Planet, MPDS4, HICAD next, etc. (additional module can be required for CAD system)
• data import by optional available interfaces or third-party products
• data export (results) to PDMS
CAD
ROHR2 Connecting with
Calculation
CAE Interfaces
ROHR2 currently supports CAE-systems by:
Interface SINETZ
Export interface to SINETZ, Program for the calculation of pressure drop and temperature loss analysis in
piping systems (SIGMA product)
Interface ROHR2 - CAESAR II Import
The program system ROHR2 includes the interface to import CAESAR II calculation data.
Files in Caesar II neutral file format (*.CII, Version 4.3 or higher) may be imported.
Interface Fluid dynamic programs
Import of time-dependent fluid hammer forces from fluid dynamic software.
This format is supported e.g. by the programs DRAKO and INROS.
Interface ROHR2-LICAD, ROHR2-CASCADE, ROHR2-FLEXPERTE
Export of support data from ROHR2 into the hanger and support design systems LICAD (LISEGA GmbH),
CASCADE and FLEXPERTE (Witzenmann GmbH)
Please refer to the ROHR2 Interfaces brochure or contact us for further details.
Concerning the optimization of your workflow our staff of specialists will advise you individually upon
request, especially regarding the data import and export to ROHR2. The integration of ROHR2 is completed
by third-party interface products.
For more CAD- and CAE interfaces please we are offering a wide range of optional available interface
modules (see 2.4).
ROHR2_Featurelist
SIGMA Ingenieurgesellschaft mbH www.rohr2.com