Download the project report.
Download the project report.
Download the project report.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Appendix<br />
°F<br />
Heat Pump Power (Watts)<br />
140<br />
130<br />
120<br />
110<br />
100<br />
132.7°F<br />
90<br />
80<br />
70<br />
60<br />
Figure 15: Energy Factor Test Start – Rheem HP50 Energy Saver Mode<br />
134.0°F<br />
133.9°F<br />
134.0°F<br />
134.2°F<br />
50<br />
0.0<br />
0:00 1:00 2:00 3:00 4:00 5:00 6:00 7:00 8:00<br />
1,300<br />
1,200<br />
1,100<br />
1,000<br />
900<br />
800<br />
700<br />
600<br />
491-09.17.doc A-8<br />
134.2°F<br />
Hours Since Start of First Draw<br />
Figure 16: HPWH Power Sensitivity to Tank Temperature<br />
Standard Error<br />
of <strong>the</strong> Estimate<br />
Rheem<br />
AirTap<br />
Six Tank Thermocouples (°F)<br />
Average Tank Temperature (°F)<br />
Water Inlet Temperature (°F)<br />
Water Outlet Temperature (°F)<br />
Water Flow Rate (GPM)<br />
Power (kW)<br />
December 3, 2009<br />
500<br />
100 105 110 115 120 125 130 135<br />
Average Tank Temperature (°F)<br />
4.5<br />
4.0<br />
3.5<br />
3.0<br />
2.5<br />
2.0<br />
1.5<br />
1.0<br />
0.5<br />
GPM / kW