HDG Navora Manual - Euroheat
HDG Navora Manual - Euroheat
HDG Navora Manual - Euroheat
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.5 User changeable settings<br />
Selection menu in “Heat<br />
production off” mode<br />
4 Using the <strong>HDG</strong> <strong>Navora</strong> Wood Boiler – User changeable settings<br />
Requirements<br />
In order to be able to proceed with making changes and corrections<br />
to the settings, the following requirements must be met.<br />
• The <strong>HDG</strong> <strong>Navora</strong> has been commissioned by authorised<br />
specialists.<br />
• The switch on the power supply is switched on.<br />
Setting the boiler temperature.<br />
The display reads Heat production off.<br />
1. Press the Arrow button.<br />
✓ The selection menu Selection submenu Information will<br />
appear in the display.<br />
2. Press the Plus button.<br />
✓ The display changes to the Settings submenu.<br />
3. Press the Arrow button.<br />
✓ The menu item is confirmed; Boiler target value TK S<br />
[°C] appears in the display.<br />
4. Use the Plus button to increase the value, or the Minus button to<br />
reduce the value.<br />
The available setting range is between<br />
78 and 85 ˚C, the standard setting is 80 ˚C.<br />
✓ The desired value is set.<br />
5. Press the Arrow button.<br />
✓ The target boiler temperature is assumed.<br />
6. Press the Arrow button.<br />
✓ The submenu is exited and Heat production off appears in<br />
the display again.<br />
✓ The boiler target temperature is set.<br />
✎ See section “4.3 Structure of the menus” in this chapter for more<br />
information.<br />
© <strong>HDG</strong> Bavaria GmbH 06/2008 <strong>HDG</strong> <strong>Navora</strong> 20/25/30 with <strong>HDG</strong> Lambda Control 1 - V 2 - en<br />
29