You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Peripherals<br />
Twisted-Pair-Cable Receiver Board<br />
KE0101CR-BW (Mounts in any slot*)<br />
*Should be mounted in slot 1 to send the display control<br />
signal. Display control signal transmission is one-way.<br />
It is possible, using a single CAT5e cable, to simultaneously send<br />
video signal (RGB, component, or composite), audio signal and the<br />
display control signal.<br />
* To send a composite video signal, the Composite Video Terminal Board<br />
(TY-FB9BD, 42TM6Y, 42TM6B or 42TM6V) must be mounted in the slot of<br />
the Plasma.<br />
This reduces both costs and setup time compared with a conventional<br />
BNC cable connection.<br />
XGA signals (1024 x 768 pixels) can be sent up to 500 ft.<br />
For the latest information on the Twisted-Pair-Cable Receiver Board,<br />
please visit the following website:<br />
http://www.kowa.co.jp/i-master/cat5-eng<br />
Twisted-Pair-Cable Transmitter/Active Switcher<br />
KE811CTW<br />
Makes it possible to simultaneously transmit video, audio and control signals<br />
over a single CAT5e cable to external equipment.<br />
Allows plasma display control (Power On/Off, Video Switching, Mute, Volume<br />
Up/Down, etc.) via RS-232C.<br />
Enables combined use with the KE0108CH-DW Distributor.<br />
DVD<br />
Component x 1 Composite x 3 RGB x 4<br />
Twisted-Pair-<br />
Cable Receiver Board<br />
Note: Specifications of peripherals on this page are subject to change without notice.<br />
Twisted-Pair-Cable Transmission System Products PDP Controller<br />
Specifications (KE0101CR-BW)<br />
Applicable displays Panasonic Plasma Displays<br />
Input channel 1 input system for extension<br />
Output channel 1 system (internal connector) for RGB<br />
or 1 system (extrenal connector) for Video,<br />
1 system for sound and 1 system for RS232C<br />
Extension cable CAT5/CAT5e/CAT6<br />
Video output signal Analog RGB: 0.7Vp-p (75 ohms); HD, VD: TTL<br />
Component: Y: 1.0Vp-p (75 ohms) sync signal included<br />
PB, PR: ± 0.35Vp-p (75 ohms)<br />
Video: 1.0Vp-p (75 ohms)<br />
Power supply Supplied from the plasma display<br />
Power consumption Approx. 6 W<br />
VCR<br />
CAT5 Active Switcher<br />
PC<br />
Distributor<br />
XGA signals can be sent up to 150 m.<br />
Twisted-Pair-Cable Transmitter<br />
KE0202CT2W<br />
Sends video, audio and control signals over a<br />
CAT5e cable.<br />
Mounted in slot of the display’s rear panel.<br />
Twisted-Pair-Cable Distributor<br />
KE0108CH-DW<br />
Distributes one input to eight output channels.<br />
Specifications (KE0202CT2W)<br />
Input channel 1 each for video (RGB and video)<br />
1 each for audio and 1 for RS-232C<br />
Output channel 1 each for monitor output (RGB, video, and audio)<br />
1 for extension output (2 division)<br />
1 for extension output (2 division)<br />
Extension cable CAT5/CAT5e/CAT6<br />
Video output signal Analog RGB: 0.7Vp-p (75 ohms); HD, VD: TTL<br />
Component: Y: 1.0Vp-p (75 ohms) sync signal included<br />
PB, PR: ± 0.35Vp-p (75 ohms)<br />
Video: 1.0Vp-p (75 ohms)<br />
Power supply AC 100 — 240 V, 50/60 hz<br />
Power consumption Approx. 10 W<br />
Specifications (KE0108CH-DW)<br />
Input channel 1 input for CAT5e<br />
Output channel 8 outputs for CAT5e<br />
Input connector RJ-45 connector<br />
Output connector RJ-45 connector<br />
Extension cable CAT5e<br />
ETX-1312C Series (Mounts in slots 1 & 2)<br />
Compact plug-in PC to facilitate turnkey solutions.<br />
Does not require any external power sources<br />
or any external brackets.<br />
Ease of use.<br />
Supports Comapct Flash Cards.<br />
Supports VGA Display.<br />
Touch Panel<br />
TY-TP65P10S (for TH-65PF10EK)<br />
TY-TP58P10S (for TH-58PH10EK/BK)<br />
TY-TP50P10S (for TH-50PF10/50PH10 series)<br />
TY-TP42P10S (for TH-42PH10/42PS10 series)<br />
High resolution<br />
High scan speed<br />
Dividable frame system for compact packaging<br />
18 19<br />
Terminals<br />
LINE IN<br />
connector<br />
LINE OUT<br />
connector<br />
COM (RS232C)<br />
MIC<br />
connector<br />
USB2.0<br />
connector<br />
Use of highly reliable optical sensors<br />
Thin profile for a perfect screen fit<br />
Attractive design for portrait positioning<br />
VGA<br />
Interface<br />
LAN (RJ45)<br />
connector<br />
Specifications<br />
Model number ETX-1312C1000 ETX-1312C600 ETX-1312C1000-XPE ETX-1312C600-XPE<br />
Slot compatibility requires slots 1 to 2<br />
Processor ULV Pentium ULV Pentium Celeron ULV Pentium ULV Pentium Celeron<br />
Celeron 1 GHz 600 MHz Celeron 1 GHz 600 MHz<br />
Memory 512 MB RAM (DDR SO-DIMM)<br />
Internal HDD 40 GB HDD (2.5" HD)<br />
Interfaces 1 x LAN, 2 x USB 2.0, 1 x Serial, 1 x Line In/Out,1 x Mic In<br />
VGA output Yes<br />
Pre-installed OS — Windows XP Embedded<br />
PXE and wake-on-LAN-capable Yes<br />
Dimensions (W x H x D) 203 x 32 x 125 mm<br />
Power supply Supplied from the plasma display<br />
Standards FCC, CE, RoHS<br />
Touch Panel (Infrared Retroreflection-Detection-System) Touch Panel (Optical-System)<br />
Note: You cannot use the TY-ST08-K/S pedestal for these touch panels.<br />
TY-TP50P8-S (for TH-50PF10/50PH10 series)<br />
TY-TP42P8-S (for TH-42PH10/42PS10 series)<br />
TY-TPEN6 Touch Pen<br />
also available.<br />
Note: The touch panel does not include a drawing application.<br />
You cannot mount both a TY-TP65P10S, TP58P10S, TP50P8-S, or<br />
TP42P8-S Touch Panel and an Anti-Glare Filter at the same time.
Change language