Elite CSW200 Manual - Fast Access Security Corp.
Elite CSW200 Manual - Fast Access Security Corp.
Elite CSW200 Manual - Fast Access Security Corp.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
28<br />
Allows gate to stay open when vehicles are obstructing gate path.<br />
Attention:<br />
To connect loop detectors,<br />
refer to page 25 and 26.<br />
Important<br />
Center Loop<br />
Even with<br />
Edge of<br />
Open Gate<br />
IN<br />
Loop Perimeter<br />
10 feet to 13 feet<br />
14 feet to 26 feet<br />
27 feet to 45 feet<br />
46 feet to 100 feet<br />
101 feet and up<br />
4'<br />
Safety<br />
Loop<br />
Number of Turns<br />
5<br />
4<br />
3<br />
2<br />
1<br />
The wire is continuously wound in<br />
the loop saw slot for the required<br />
number of turns. One turn shown.<br />
(Refer to table above)<br />
Remove sharp inside corners<br />
by making corner cuts<br />
CENTER LOOP SYSTEM<br />
4'<br />
Center<br />
Loop<br />
1/8" to 1/4"<br />
Saw Slot<br />
4'<br />
Typical<br />
Safety<br />
Loop<br />
Road Surface<br />
Sealant<br />
Loop Wire<br />
(3 Wires Shown,<br />
amount varies.<br />
Refer to table)<br />
OUT<br />
Home Run<br />
Home Run<br />
This option is for all vehicles including ones less than 14' long.<br />
Caution Center loop system requires two safety loops.<br />
1/8" to 1/4"<br />
Saw Slot<br />
Recommended Loop Wire<br />
XLPE 12-18 gauge<br />
USE 12-18 gauge<br />
Use heavier wire gauge for a more<br />
durable loop area<br />
Min 1"<br />
The wire must be twisted together 6 twists per foot from<br />
the end of the loop to the loop detector connection.